MMGGD1P0C [CK-COMPONENTS]

Subminiature Precision Snap-acting Switches;


型号：	MMGGD1P0C
厂家：	C&K COMPONENTS
描述：	Subminiature Precision Snap-acting Switches 开关光电二极管
文件：	总3页 (文件大小：261K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MM Series

Subminiature Precision Snap-acting Switches

Features/Benefits

Typical Applications

•

Low level and power switching

Long electrical and mechanical life

Increased overtravel

•

Limited space constraints

Miniaturized military devices

Communication devices

Reliable snap-acting mechanism

Specifications

Materials

CONTACT RATING: From low level* to 7 AMPS @ 250 V AC.

ELECTRICAL LIFE: 100,000 cycles at full rated load.

INSULATION RESISTANCE: 1,000 ohm min.

DIELECTRIC STRENGTH: 1,000 V RMS min. @ sea level.

OPERATING TEMPERATURE: –67 F to 275 F (–55 C to 135 C).

OPERATING FORCE: 5 oz. (142 grams) max. at actuator button.

MOUNTING: 2-56 screws, torque 2 in/lbs max.

SWITCH HOUSING: Heat resistant phenolic (UL 94V-0).

ACTUATOR BUTTON: Heat resistant phenolic (UL 94V-0).

SPRING: Beryllium copper CDA alloy C17200.

PIVOT: Brass CDA alloy 260.

MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP @

125 V AC. 24K gold for 1 AMP @ 125 V AC or less.

*Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @

20 V AC or DC max.

STATIONARY CONTACTS: Fine silver inlay on copper CDA alloy

C10200 for ratings greater than 1 AMP @ 125 V AC. 24K gold on

copper CDA alloy C10200 for 1 AMP @ 125 V AC or less.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service center.

TERMINALS: Copper CDA alloy C18700.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages J-31 through J-32. For additional options not shown in catalog, consult Customer Service Center.

M M

G G

Series

MM SP, Mom.

Operating Force

GG 5 oz./142 grams

Electrical Rating

D1 7 A, 250 VAC

F5 1 A, 125 V AC, 30 V DC

Actuator

Pin plunger

D0 Plunger, high overtravel

Terminations

C Single turret solder

L Left formed PC thru-hole

Leaf

Leaf, high force, low motion

Leaf roller

Leaf roller, high force, low motion

Right formed PC thru-hole

PC thru-hole, .035”

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ck-components.com

J–30

MM Series

Subminiature Precision Snap-acting Switches

SWITCH WITH STANDARD OPTIONS

MMGGD1P0C

BASIC

OPERATING

FORCE

ELECTRICAL

RATING

PART NUMBER

(OZ./GRAMS)

142

7 AMPS @ 250 V AC.

MMGGD1P0C

SERIES

OPERATING FORCE

MM SPDT MOMENTARY

OPTION

CODE

BASIC SWITCH

OPERATING FORCE

5 oz. (142 grams) maximum for basic switch

with pin plunger actuator (‘P0’ actuator option).

NOTE: Operating force varies with actuator option, see ACTUATOR option section.

ELECTRICAL RATING

CONTACT MATERIAL

STATIONARY CONTACT

OPTION

CODE

RoHS

COMPLIANT*

RoHS

COMPATIBLE*

MOVABLE CONTACT

ELECTRICAL RATING

Fine silver.

Fine silver inlay on copper alloy.

24K Gold on copper alloy.

7 AMPS @ 250 V AC.

Yes

From low level* to 1 AMP

@ 125 V AC, 30 V DC.

24K Gold.

Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.

All models

with all options.

Consult Customer Service Center for availability and delivery of nonstandard ratings.

* Low Level=conditions where no arcing occurs during switching,

i.e., 0.4 VA max. @ 20 V AC or DC max.

ACTUATOR

OPTION CODE

FIG.

DIM. A

DIM. B

DIM. C

FIG. 1

Pin Plunger

FIG. 2

Leaf

FIG. 3

Plunger

FIG. 4

Leaf Roller

FIG. 5

Leaf

FIG. 6

Leaf Roller

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

J–31

MM Series

Subminiature Precision Snap-acting Switches

ACTUATOR

SWITCH CHARACTERISTICS

MAXIMUM

DIFFERENTIAL

TRAVEL

OPTION

CODE

MAXIMUM OPERATING

FORCE (OZ./GRAMS)

MINIMUM RELEASE

FORCE (OZ./GRAMS)

MAXIMUM

PRETRAVEL

MINIMUM

OVERTRAVEL

NOTE: For basic switch operating forces, see page J-31

TERMINATIONS

LEFT FORMED PC THRU-HOLE

SINGLE TURRET SOLDER

PC MOUNTING

PC THRU-HOLE, .035

RIGHT FORMED PC THRU-HOLE

PC MOUNTING

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ck-components.com

J–32

相关型号：