1008PS-103KSC [COILCRAFT]

General Purpose Inductor, 10uH, 10%, 1 Element, Ceramic-ferrite-Core, SMD, 1515, CHIP, 1515;
1008PS-103KSC
型号: 1008PS-103KSC
厂家: Coilcraft lnc.    Coilcraft lnc.
描述:

General Purpose Inductor, 10uH, 10%, 1 Element, Ceramic-ferrite-Core, SMD, 1515, CHIP, 1515

测试 功率感应器 电感器
文件: 总2页 (文件大小:333K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Document 219-1  
Shielded High SRF Inductors  
1008PS  
HigherꢀSRFꢀthanꢀourꢀotherꢀpowerꢀinductors  
Highꢀinductanceꢀwithꢀtightꢀtolerance  
Excellentꢀcurrentꢀhandlingꢀforꢀaꢀpartꢀthisꢀsize  
Core material Ceramic/Ferrite  
Core and winding loss See www.coilcraft.com/coreloss  
Terminations RoHS compliant silver-palladium-platinum-glass frit.  
Other terminations available at additional cost.  
Weight 122132 mg  
Ambient temperature –40°C to +105°C with Irms current, +105°C  
to +145°C with derated current  
Storage temperature Component: –40°C to +145°C.  
Tape and reel packaging: –40°C to +80°C  
Resistance to soldering heat Max three 40 second reflows at  
+260°C, parts cooled to room temperature between cycles  
Temperature Coefficient of Inductance (TCL) +100 to +350 ppm/°C  
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /  
85% relative humidity)  
Failures in Time (FIT) / Mean Time Between Failures (MTBF)  
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332  
Packaging 750/7reel; 2500/13reel Plastic tape: 12 mm wide,  
0.3 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth  
PCB washing Only pure water or alcohol recommended  
Isat(A)6  
Irms(A)7  
1. When ordering, specify termination and packaging codes:  
±118PS-±15KLC  
Inductance  
±±102  
DCR4  
max  
SRF5  
Part  
Q
typ ±10 210 310 21°C 41°C  
number1  
(µH)  
min3 (Ohms) (MHz) drop drop drop rise rise  
Termination: L= RoHS compliant silver-palladium-  
platinum-glass frit.  
1008PS-102KL_  
1008PS-152KL_  
1008PS-182KL_  
1008PS-222KL_  
1008PS-272KL_  
1.0  
1.5  
1.8  
2.2  
2.7  
35  
35  
35  
36  
38  
26  
38  
38  
38  
38  
38  
38  
40  
45  
45  
45  
45  
45  
45  
50  
0.05 387  
0.06 276  
0.09 253  
0.10 228  
0.14 207  
0.84 199  
0.26 185  
0.35 160  
0.36 150  
0.58 120  
3.5  
2.7  
2.3  
2.4  
1.6  
1.5  
1.5  
1.3  
1.5  
1.3  
3.9  
3.2  
2.7  
2.8  
2.0  
1.6  
1.8  
1.6  
1.7  
1.5  
4.2 1.4  
3.5 1.4  
2.0  
2.0  
Special order:  
3.0 0.98 1.4  
T = RoHS tin-silver-copper (95.5/4/0.5)  
or S = non-RoHS tin-lead (63/37).  
Packaging: C= 7machine-ready reel. EIA-481 em-  
bossed plastic tape (750 parts per full  
reel).  
3.1 1.2  
2.3 1.0  
1.7  
1.4  
1008PS-332KL_  
1008PS-392KL_  
1008PS-472KL_  
1008PS-562KL_  
1008PS-682KL_  
3.3  
3.9  
4.7  
5.6  
6.8  
1.6 0.51 0.67  
2.0 0.82 1.1  
1.7 0.70 0.95  
1.8 0.66 0.87  
1.6 0.45 0.76  
B= Less than full reel. In tape, but not  
machine ready. To have a leader and  
trailer added ($25 charge), use code  
letter C instead.  
D= 13machine-ready reel. EIA-481  
embossed plastic tape. Factory order  
only, not stocked (2500 parts per full  
reel).  
1008PS-103KL_  
1008PS-153KL_  
1008PS-223KL_  
1008PS-333KL_  
1008PS-393KL_  
10  
0.92 105  
0.84 1.0  
1.1 0.40 0.59  
15  
22  
33  
39  
1.15  
1.40  
1.61  
1.85  
2.5  
3.8  
4.3  
5.8  
6.3  
35  
26  
20  
16  
19  
12  
0.81 0.87 0.90 0.36 0.51  
0.67 0.75 0.79 0.33 0.44  
0.53 0.61 0.68 0.30 0.42  
0.49 0.56 0.60 0.28 0.39  
0.47 0.52 0.54 0.23 0.31  
0.38 0.42 0.45 0.21 0.26  
2. Inductance measured at 100 kHz, 0.1 Vrms, using  
Coilcraft SMD-A fixture in Agilent/HP 4263B impedance  
analyzer or equivalent.  
3. Q measured at 1 MHz using an Agilent/HP 16193 test  
fixture and an Agilent/HP 4291 or equivalent.  
4. DCR measured on micro-ohmmeter and Coilcraft  
CCF840 test fixture.  
5. SRF measured using a Coilcraft SMD-D test fixture and  
an Agilent/HP 8753D network analyzer or equivalent.  
6. DC current at which the inductance drops the specicfied  
amount from its value without current.  
7. Current that causes the specified temperature rise from  
25°C ambient.  
8. Electrical specifications at 25°C.  
Refer to Doc 362 “Soldering Surface Mount Components”  
before soldering.  
1008PS-473KL_  
1008PS-683KL_  
1008PS-823KL_  
47  
68  
82  
9.0 0.33 0.38 0.42 0.18 0.26  
7.0 0.35 0.38 0.39 0.16 0.20  
7.0 0.30 0.33 0.35 0.14 0.20  
5.8 0.27 0.30 0.33 0.13 0.18  
5.0 0.21 0.24 0.27 0.13 0.17  
3.8 0.19 0.21 0.23 0.11 0.15  
3.1 0.14 0.17 0.19 0.10 0.13  
2.8 0.13 0.15 0.17 0.093 0.12  
1008PS-104KL_ 100  
1008PS-124KL_ 120  
1008PS-154KL_ 150  
1008PS-224KL_ 220  
1008PS-334KL_ 330  
1008PS-474KL_ 470  
1008PS-564KL_ 560  
1008PS-684KL_ 680  
1008PS-824KL_ 820  
1008PS-105KL_ 1000  
50  
7.5  
55 10.0  
55 11.5  
55 16.3  
55 18.1  
55 24.0  
45 26.0  
45 29.0  
2.5 0.11 0.15 0.17 0.073 0.11  
1.5 0.10 0.12 0.13 0.073 0.10  
2.0 0.11 0.13 0.14 0.070 0.10  
Document 219-1 Revised 08/17/09  
Document 219-2  
Power Chip Inductors – 1008PS Series  
Typical L vs Frequency  
Typical L vs Current  
10000  
10000  
1000 µH  
1000 µH  
1000  
1000  
100 µH  
100 µH  
100  
100  
10  
10 µH  
10 µH  
10  
1 µH  
1 µH  
1
1
0.1  
0.1  
0.01  
0.1  
1
10  
0.01  
0.1  
1
10  
Frequency (MHz)  
Current (A)  
B
C
D
F
H
Irms Derating  
I
J
I
120  
110  
A
E
100  
90  
80  
70  
60  
50  
40  
30  
20  
G
Terminal wraparound:  
approx 0.015/0,38 both ends  
Recommended  
Land Pattern  
A
max  
B
C
D
E
F
G
max max max max max typ  
H
I
J
0.150 0.149 0.108 0.070 0.102 0.084 0.020 0.100 0.040 0.050 inches  
3,81 3,78 2,74 1,78 2,59 2,13 0,51 2,54 1,02 1,27 mm  
10  
0
-40 -20  
0
20  
40  
60  
80  
100 120 140 160  
Ambient temperature (°C)  
Document 219-2 Revised 08/17/09  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY