2222SQ-90N [COILCRAFT]
Square Air Core Inductors;型号: | 2222SQ-90N |
厂家: | Coilcraft lnc. |
描述: | Square Air Core Inductors |
文件: | 总3页 (文件大小:546K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 720-1
1515SQ
2222SQ
2929SQ
Square Air Core Inductors
• Excellent Q factors – up to 230 at 400 MHz!
• Current handling as high as 5.7 Amps
• Inductance values from 47 to 500 nH
• Flat top and bottom for reliable pick and place and mechanical
stability
Designer’s Kit C438 contains 10 each of all 5% parts
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +145°C (ambient + temp rise).
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Test
frequency
(MHz)
Inductance2
(nH)
Percent
Q4
typ
SRF min5
(GHz)
DCR max
(mOhm)
Irms6
(A)
Part number1
tolerance3
1515SQ-47N_E_
1515SQ-68N_E_
1515SQ-82N_E_
47
68
82
5,2
5,2
5,2
230
230
230
400
400
400
1.87
2.13
1.79
6.35
8.60
9.40
4.9
5.5
5.6
2222SQ-90N_E_
2222SQ-111_E_
2222SQ-131_E_
2222SQ-161_E_
2222SQ-181_E_
2222SQ-221_E_
2222SQ-271_E_
2222SQ-301_E_
90
110
130
160
180
220
270
300
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
140
140
140
140
140
140
140
150
50
50
50
50
50
50
50
50
1.15
1.00
1.00
1.00
1.10
1.00
0.800
0.720
5.50
6.50
7.50
8.25
9.50
11.0
12.5
13.8
5.0
5.7
5.4
5.7
5.0
5.0
4.3
3.7
2929SQ-331_E_
2929SQ-361_E_
2929SQ-391_E_
2929SQ-431_E_
2929SQ-501_E_
330
360
390
430
500
5,2
5,2
5,2
5,2
5,2
180
180
180
180
180
50
50
50
50
50
0.660
0.620
0.590
0.550
0.500
12.5
13.5
14.5
15.5
16.5
4.7
4.5
4.4
4.2
4.3
1. When ordering, specify tolerance, termination and packaging codes:
1515SQ-82NJEC
2. Inductance measured at specified test frequency, 0.1 Vrms, 0 A using
an Agilent/HP 4287A LCR meter with the following Coilcraft test fixtures:
CCF1191C for 1515SQ; CCF1197A for 2222SQ and 2929SQ.
Tolerance: G = 2% J = 5%
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at specified test frequency, using an Agilent/HP 4291A
impedance analyzer.
5. SRF measured using an Agilent/HP 8753 network analyzer and the
following Coilcraft test fixtures: CCF1143 for 1515SQ; CCF1199
for 2222SQ-90N and 2222SQ-161; CCF1200 for 2222SQ-301 and
2929SQ-501.
6. Current that causes a 20°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
(Table shows stock tolerances in bold.)
Termination: E = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order, added cost:
T = RoHS tin-silver-copper (95.5/4/0.5) over copper
or S = non-RoHS tin-lead (63/37) over copper.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
7. Electrical specifications at 25°C.
D = 13″ machine-ready reel. EIA-481 embossed plastic
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
tape. Factory order only, not stocked.
Document 720-1 Revised 10/12/15
Document 720-2
Square Air Core Inductors – 1515SQ, 2222SQ, 2929SQ
Part
number
Weight
(mg)
A
A
B
C
D
E
F
max
1515SQ-47N
1515SQ-68N
1515SQ-82N
0.160 0.010
4,06 0,254
0.210 0.010
5,33 0,254
0.230 0.010
5,84 0,254
0.140 0.007
3,56 0,178
0.140 0.007
3,56 0,178
0.140 0.007
3,56 0,178
0.147 0.007 0.140
3,73 0,178 3,56
0.147 0.007 0.190
3,73 0,178 4,83
0.147 0.007 0.210
3,73 0,178 5,33
0.175 0.070
4,45 1,78
0.175 0.070
4,45 1,78
0.175 0.070
4,45 1,78
110
145
165
Strip
length
C
min
2222SQ-90N
2222SQ-111
2222SQ-131
2222SQ-161
2222SQ-181
2222SQ-221
2222SQ-271
2222SQ-301
0.205 0.015
5,21 0,381
0.250 0.015
6,35 0,381
0.265 0.015
6,73 0,381
0.290 0.015
7,37 0,381
0.320 0.015
8,13 0,381
0.390 0.015
9,91 0,381
0.460 0.015
11,68 0,381
0.470 0.015
11,94 0,381
0.215 0.010
5,46 0,254
0.220 0.010
5,59 0,254
0.220 0.010
5,59 0,254
0.220 0.010
5,59 0,254
0.220 0.010
5,59 0,254
0.220 0.010
5,59 0,254
0.220 0.010
5,59 0,254
0.225 0.010
5,72 0,254
0.224 0.010 0.175
5,69 0,254 4,45
0.224 0.010 0.230
5,69 0,254 5,84
0.224 0.010 0.245
5,69 0,254 6,22
0.224 0.010 0.260
5,69 0,254 6,60
0.224 0.010 0.290
5,69 0,254 7,37
0.224 0.010 0.360
5,69 0,254 9,14
0.224 0.010 0.420
5,69 0,254 10,67
0.224 0.010 0.440
5,69 0,254 11,18
0.255 0.085
6,48 2,16
0.265 0.085
6,73 2,16
0.265 0.085
6,73 2,16
0.265 0.085
6,73 2,16
0.265 0.085
6,73 2,16
0.265 0.085
6,73 2,16
0.265 0.085
6,73 2,16
0.265 0.085
280
330
371
425
460
550
640
650
B
D
E
6,73
2,16
F
2929SQ-331
2929SQ-361
2929SQ-391
2929SQ-431
2929SQ-501
0.405 0.015
10,29 0,381
0.445 0.015
11,30 0,381
0.485 0.015
12,32 0,381
0.520 0.015
13,21 0,381
0.550 0.015
14,00 0,381
0.295 0.010
7,49 0,254
0.295 0.010
7,49 0,254
0.295 0.010
7,49 0,254
0.295 0.010
7,49 0,254
0.290 0.010
7,49 0,254
0.285 0.010 0.375
7,24 0,254 9,53
0.285 0.010 0.415
7,24 0,254 10,541
0.285 0.010 0.455
0.325
8,26
0.325
8,26
0.325
8,26
0.325
8,26
0.09
2,29
0.09
2,29
0.09
2,29
0.09
2,29
0.09
2,29
855
928
Recommended
Land Pattern
Packaging:
990
1515SQ-47N 500/7″reel; 2000/13″ reel Plastic tape: 12 mm wide,
7,24 0,254
0.285 0.010 0.490
7,24 0,254 12,45
0.285 0.010 0.520
7,24 0,254 13,21
11,56
0.26 mm thick, 8 mm pocket spacing, 4.06 mm pocket depth
1072
1160
1515SQ-68N 500/7″reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.325
8,26
0.26 mm thick, 8 mm pocket spacing, 4.06 mm pocket depth
1515SQ-82N 500/7″reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 4.06 mm pocket depth
inches
mm
All dimensions are in
.
2222SQ-90N 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.32 mm thick, 12 mm pocket spacing, 5.97 mm pocket depth
2222SQ-111 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.10 mm pocket depth
2222SQ-131 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.10 mm pocket depth
2222SQ-161 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.97 mm pocket depth
2222SQ-181 250/7″reel; 750/13″ reel Plastic tape: 16 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.10 mm pocket depth
2222SQ-221 250/7″reel; 750/13″ reel Plastic tape: 24 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.10 mm pocket depth
2222SQ-271 250/7″reel; 750/13″ reel Plastic tape: 24 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.10 mm pocket depth
2222SQ-301 250/7″reel; 750/13″ reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.97 mm pocket depth
2929SQ-331 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.40 mm thick, 12 mm pocket spacing, 6.99 mm pocket depth
2929SQ-361 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.40 mm thick, 12 mm pocket spacing, 7.75 mm pocket depth
2929SQ-391 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.45 mm thick, 12 mm pocket spacing, 7.75 mm pocket depth
2929SQ-431 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.45 mm thick, 12 mm pocket spacing, 7.75 mm pocket depth
2929SQ-501 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 7.49 mm pocket depth
Recommended pick and place nozzles
1515SQ: OD: 0.170 inch; ID: 0.059 inch
2222SQ, 47 – 200 nH: 3.5 mm × 7 mm (rubber). This nozzle is available here.
2222SQ, 270 – 300 nH: 4.0 mm × 12 mm (rubber). This nozzle is available here.
2929SQ: 4.0 mm × 12 mm (rubber). This nozzle is available here.
Document 720-2 Revised 10/12/15
Document 720-3
Square Air Core Inductors – 1515SQ, 2222SQ, 2929SQ
Typical L vs Frequency
1000
Typical Q vs Frequency
350
500 nH
300 nH
47, 68, 82 nH
300
250
200
150
100
160 nH
90, 160 nH
300 nH
90 nH
82 nH
100
500 nH
68 nH
47 nH
50
0
10
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Document 720-2 Revised 10/12/15
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明