BU9-2011R6BL [COILCRAFT]

Common Mode Chokes; 共模扼流圈
BU9-2011R6BL
型号: BU9-2011R6BL
厂家: Coilcraft lnc.    Coilcraft lnc.
描述:

Common Mode Chokes
共模扼流圈

共模扼流圈
文件: 总6页 (文件大小:355K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Document 260-1  
Common Mode Chokes  
BU Series  
These low cost, high performance choke coils are de-  
signed to virtually eliminate line conducted common  
mode noise.  
The BU9S and BU9HS families are ideal for signal line  
applications; the others can be used in switching power  
supplies and power supply circuits. All provide signifi-  
cant attenuation of common mode noise across a broad  
range of frequencies.  
For height-restricted applications, the BU9 and BU9S  
filters are available in a horizontal configuration, which  
reduces their height to under half an inch (12.5 mm).  
For free evaluation samples, contact Coilcraft or request  
them on-line at www.coilcraft.com.  
Core material Ferrite  
Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost.  
Weight BU9: 3.1 – 4.1 g  
BU9H: 3.1 – 4.1 g  
BU9HS: 3.1 – 3.8 g  
BU9S: 3.1 – 3.8 g  
BU10: 6.2 – 6.6 g  
BU15: 14.6 – 16.1 g  
BU16: 15.1 – 18.0 g  
Ambient temperature –40°C to +125°C  
Storage temperature Component: –40°C to +125°C.  
Packaging: –40°C to +80°C  
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)  
Failures in Time (FIT) / Mean Time Between Failures (MTBF)  
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332  
Packaging BU9: 100 per tray  
BU9H: 100 per tray  
BU9HS: 100 per tray  
BU9S: 100 per tray  
BU10: 100 per tray  
BU15: 80 per tray  
BU16: 80 per tray  
PCB washing Only pure water or alcohol recommended  
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-1 Revised09/09/09  
© Coilcraft, Inc. 2009  
Document 260-2  
Common Mode Chokes - BU9, BU9H Series  
Frequencyrange  
Inductance2 Inductancedifference  
Impedancemax  
(kOhms)  
@75%of  
DCR1  
Current  
L1,L2  
L1-L2  
Partnumber  
impedancemax  
(Ohms)  
max(Aac)  
min(mH)  
max(µH)  
BU9-103R25BL  
BU9-2820R5BL  
BU9-1320R7BL  
BU9-6011R0BL  
BU9-2011R6BL  
60@220 kHz  
53@410 kHz  
52@660 kHz  
36@1300 kHz  
5.4@1500 kHz  
200 – 240 kHz  
310 – 430 kHz  
600 – 700 kHz  
1200 – 1400 kHz  
900 – 2100 kHz  
3.5  
1.0  
0.5  
0.2  
0.1  
0.25  
0.50  
0.70  
1.00  
1.60  
10.0  
2.8  
1.3  
0.6  
0.2  
200  
50  
50  
25  
25  
BU9H-103R25BL  
BU9H-2820R5BL  
BU9H-1320R7BL  
BU9H-6011R0BL  
BU9H-2011R6BL  
60@220 kHz  
53@410 kHz  
52@660 kHz  
36@1300 kHz  
5.4@1500 kHz  
200 – 240 kHz  
310 – 430 kHz  
600 – 700 kHz  
1200 – 1400 kHz  
900 – 2100 kHz  
3.5  
1.0  
0.5  
0.2  
0.1  
0.25  
0.50  
0.70  
1.00  
1.60  
10.0  
2.8  
1.3  
0.6  
0.2  
200  
50  
50  
25  
25  
1. DCRisperwinding  
2. Inductancetestedat1kHz, 1Vrms, 0 AdconanAgilent/HP 4284ALCR-meterorequivalent.  
3. 1000Vrmstypicalisolationbetweenwindings.  
4. Electrical specifications at 25°C.  
Typical Attenuation  
Typical Impedance  
BU9H  
BU9  
Dot  
indicates  
pin 1  
0.69  
17,5  
0.43  
11,0  
0.69  
17,5  
0.61  
15,5  
max  
max  
max  
max  
0.49  
12,5  
0.157 ±0.04  
4,0 ±1,0  
max  
0.67  
17,0  
max  
0.157 ±0.04  
4,0 ±1,0  
Dot  
indicates  
pin 1  
1
4
2
1
0.024  
0,6  
0.31 ±0.02  
8,0 ±0,5  
Æ
1
1
4
2
0.276 ±0.02  
7,0 ±0,5  
0.43  
max  
11,0  
0.024  
0,6  
0.31 ±0.02  
8,0 ±0,5  
Æ
0.276 ±0.02  
7,0 ±0,5  
1
4
4
1
2
2
3
4
3
2
0.276 ±0.02  
7,0 ±0,5  
0.276 ±0.02  
7,0 ±0,5  
1
1
4
0.31 ±0.02  
8,0 ±0,5  
3
0.31 ±0.02  
8,0 ±0,5  
3
2
0.040  
1,0  
0.040  
1,0  
Æ
Æ
Recommended  
Board Layout  
Recommended  
Board Layout  
2
1
2
3
1
4
4
3
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-2 Revised09/09/09  
© Coilcraft, Inc. 2009  
Document 260-3  
Common Mode Chokes - BU9S, BU9HS Series  
Frequencyrange  
@75%of  
Inductance2 Inductancedifference  
Impedancemax  
(kOhms)  
DCR1  
Current  
L1,L2  
L1-L2  
Partnumber  
impedancemax  
(Ohms)  
max(Aac)  
min(mH)  
max(µH)  
BU9S-153R15BL  
BU9S-7020R3BL  
BU9HS-153R15BL  
BU9HS-7020R3BL  
71@210 kHz  
66@330 kHz  
71@210 kHz  
66@330 kHz  
190 – 230 kHz  
300 – 360 kHz  
190 – 230 kHz  
300 – 360 kHz  
5.0  
2.5  
5.0  
2.5  
0.15  
0.30  
0.15  
0.30  
15.0  
7.0  
15.0  
7.0  
300  
200  
300  
200  
1. DCRisperwinding  
2. Inductancetestedat1kHz, 1Vrms, 0 AdconanAgilent/HP 4284ALCR-meterorequivalent.  
3. 1000Vrmstypicalisolationbetweenwindings.  
4. Electrical specifications at 25°C.  
Typical Attenuation  
Typical Impedance  
BU9S  
BU9HS  
Dot  
indicates  
pin 1  
0.69  
17,5  
0.43  
11,0  
max  
max  
0.61  
15,5  
0.69  
17,5  
max  
max  
0.49  
12,5  
0.157 ±0.04  
4,0 ±1,0  
0.67  
17,0  
max  
max  
0.157 ±0.04  
4,0 ±1,0  
4
1
1
2
2
1
Dot  
indicates  
pin 1  
4
1
0.024  
0,6  
Æ
0.276 ±0.02  
7,0 ±0,5  
0.31 ±0.02  
8,0 ±0,5  
0.31 ±0.02  
8,0 ±0,5  
0.024  
Æ
0.276 ±0.02  
7,0 ±0,5  
0.43  
max  
11,0  
0,6  
4
3
1
4
1
2
1
3
3
2
0.276 ±0.02  
7,0 ±0,5  
0.276 ±0.02  
7,0 ±0,5  
4
4
1
0.31 ±0.02  
8,0 ±0,5  
2
0.040  
1,0  
0.31 ±0.02  
8,0 ±0,5  
3
2
Æ
0.040  
1,0  
Æ
Recommended  
Board Layout  
Recommended  
Board Layout  
4
1
2
4
1
2
3
3
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-3 Revised09/09/09  
© Coilcraft, Inc. 2009  
Document 260-4  
Common Mode Chokes - BU10 Series  
Frequencyrange  
Inductance2 Inductancedifference  
Impedancemax  
(kOhms)  
@75%of  
impedancemax  
DCR1  
(Ohms)  
Current  
max(Aac)  
L1,L2  
L1-L2  
Partnumber  
min(mH)  
max(µH)  
BU10-1811R2BL  
BU10-1311R6BL  
BU10-1012R2BL  
BU10-6003R0BL  
3.9@1.8 MHz  
2.2@2.2 MHz  
1.6@3.1 MHz  
1.0@3.0 MHz  
1000 – 3200 kHz  
800 – 2000 kHz  
1300 – 8900 kHz  
800 – 10000 kHz  
0.20  
0.12  
0.08  
0.04  
1.20  
1.60  
2.20  
3.00  
0.18  
0.13  
0.10  
0.06  
30  
20  
15  
10  
1. DCRisperwinding  
2. Inductancetestedat1kHz, 1Vrms, 0 AdconanAgilent/HP 4284ALCR-meterorequivalent.  
3. 1000Vrmstypicalisolationbetweenwindings.  
4. Electrical specifications at 25°C.  
Typical Attenuation  
Typical Impedance  
0.67  
max  
Dot  
indicates  
pin 1  
17,0  
0.89  
22,5  
max  
0.177 ±0.04  
4,5 ±1,0  
1
2
4
1
0.51 ±0.02  
13,0 ±0,5  
0.028  
0,7  
Æ
0.394 ±0.02  
10,0 ±0,5  
0.75  
max  
19,0  
Recommended  
Board Layout  
4
3
1
2
2
2
3
3
1
0.394 ±0.02  
10,0 ±0,5  
4
4
1
0.51 ±0.02  
13,0 ±0,5  
0.047  
Æ
1,2  
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-4 Revised09/09/09  
© Coilcraft, Inc. 2009  
Document 260-5  
Common Mode Chokes - BU15 Series  
Frequencyrange  
Inductance2 Inductancedifference  
Impedancemax  
(kOhms)  
@75%of  
impedancemax  
DCR1  
(Ohms)  
Current  
max(Aac)  
L1,L2  
L1-L2  
Partnumber  
min(mH)  
max(µH)  
BU15-4530R4BL  
BU15-1430R7BL  
BU15-7521R0BL  
BU15-4421R3BL  
BU15-2721R6BL  
400@230 kHz  
115@470 kHz  
60@600 kHz  
36@670 kHz  
20@1000 kHz  
140 – 160 kHz  
400 – 650 kHz  
420 – 720 kHz  
430 – 1000 kHz  
510 – 1400 kHz  
3.0  
1.0  
0.6  
0.3  
0.2  
0.40  
0.70  
1.00  
1.30  
1.60  
45.0  
14.0  
7.5  
300  
300  
150  
100  
60  
4.4  
2.7  
1. DCRisperwinding  
2. Inductancetestedat1kHz, 1Vrms, 0 AdconanAgilent/HP 4284ALCR-meterorequivalent.  
3. 1000Vrmstypicalisolationbetweenwindings.  
4. Electrical specifications at 25°C.  
Typical Attenuation  
Typical Impedance  
0.91  
23,0  
0.75  
max  
19,0  
Dot  
indicates  
pin 1  
max  
1.08  
27,5  
max  
0.177 ±0.04  
4,5 ±1,0  
2
1
4
1
0.028  
0,7  
0.51 ±0.02  
13,0 ±0,5  
Æ
0.40 ±0.02  
10,0 ±0,5  
Recommended  
Board Layout  
4
1
2
2
3
2
3
1
4
0.40 ±0.02  
10,0 ±0,5  
1
4
3
0.51 ±0.02  
13,0 ±0,5  
0.047  
1,2  
Æ
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-5 Revised09/09/09  
© Coilcraft, Inc. 2009  
Document 260-6  
Common Mode Chokes - BU16 Series  
Frequencyrange  
Inductance2 Inductancedifference  
Impedancemax  
(kOhms)  
@75%of  
impedancemax  
DCR1  
(Ohms)  
Current  
max(Aac)  
L1,L2  
L1-L2  
Partnumber  
min(mH)  
max(µH)  
BU16-4530R5BL  
BU16-2530R7BL  
BU16-1031R0BL  
BU16-4021R5BL  
BU16-2022R0BL  
285@150 kHz  
120@200 kHz  
60@320 kHz  
20@470 kHz  
11@690 kHz  
140 – 160 kHz  
160 – 220 kHz  
260 – 390 kHz  
360 – 600 kHz  
450 – 900 kHz  
2.3  
1.3  
0.5  
0.3  
0.2  
0.50  
0.70  
1.00  
1.50  
2.00  
45.0  
25.0  
10.0  
4.0  
900  
500  
200  
80  
2.0  
50  
1. DCRisperwinding  
2. Inductancetestedat1kHz, 1Vrms, 0 AdconanAgilent/HP 4284ALCR-meterorequivalent.  
3. 1000Vrmstypicalisolationbetweenwindings.  
4. Electrical specifications at 25°C.  
Typical Attenuation  
Typical Impedance  
0.75  
max  
19,0  
0.91  
23,0  
max  
Dot  
indicates  
pin 1  
1.08  
27,5  
max  
0.177 ±0.04  
4,5 ±1,0  
1
2
1
0.028  
0,7  
0.51 ±0.02  
13,0 ± 0,5  
Æ
0.394 ±0.02  
10,0 ±0,5  
Recommended  
Board Layout  
4
3
1
2
3
2
2
3
1
4
0.394 ±0.02  
10,0 ±0,5  
1
4
0.51 ±0.02  
13,0 ±0,5  
0.047  
Æ
1,2  
Specifications subject to change without notice.  
Please check our website for latest information.  
Document260-6 Revised09/09/09  
© Coilcraft, Inc. 2009  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY