首页 |元器件品牌

CQ7584-ALB [COILCRAFT]

Data Line Filter,;
CQ7584-ALB
型号： CQ7584-ALB
厂家： Coilcraft lnc.    Coilcraft lnc.
描述：

Data Line Filter,

LTE
文件： 总4页 (文件大小：197K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Document 1194S-1  
CQ7584-AL  
CJ5100-AL  
CR7856-AL  
SMT Data Line EMI Filters  
Core material Ferrite  
Terminations RoHS compliant tin-silver-copper over tin over nickel  
over phos bronze  
Weight 0.22 – 0.27 g  
Ambient temperature –40°C to +85°C with Irms current  
Maximum part temperature +125°C (ambient + temp rise)  
Storage temperature Component: –40°C to +125°C.  
Tape and reel packaging: –40°C to +80°C  
Resistance to soldering heat Max three 40 second reflows at  
+260°C, parts cooled to room temperature between cycles  
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /  
85% relative humidity)  
• Lowprofile(<5.0mm)compactsurfacemountpackages  
• Ideal for use to suppress up to 100 MHz common mode  
noise for general differential signal line filtering  
• Provides over 40 dB common mode noise attenuation  
• Inductances from 0.47 mH to 4.7 mH  
• Up to 0.85 Arms  
• 500 Vrms Isolation (hipot)  
• Upon request, additional values may be available for  
particular applications  
Failures in Time (FIT) / Mean Time Between Failures (MTBF)  
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332  
Packaging  
CQ7584-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide,  
0.4 mm thick, 12 mm pocket spacing, 4.8 mm pocket depth  
CJ5100-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide,  
0.4 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth  
CR7856-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide,  
0.4 mm thick, 12 mm pocket spacing, 4.8 mm pocket depth  
PCB washing Tested to MIL-STD-202 Method 215 plus an additional  
aqueous wash. See Doc787_PCB_Washing.pdf.  
Inductance  
Common mode  
peak impedance  
(kOhms)  
Cutoff  
frequency  
(MHz)  
DCR  
max  
(Ohms)  
Length Width Height  
(mH)  
Part  
number  
Irms  
(A)  
Isolation  
(Vrms)  
max  
max  
max  
nom  
min  
(mm)  
(mm)  
(mm) Page  
CQ7584-AL  
CJ5100-AL  
CR7856-AL 11.17 @ 1.9 MHz  
6.81 @ 4.4 MHz  
4.49 @ 9.9 MHz  
760  
920  
460  
2.20  
0.47  
4.70  
1.54  
0.329  
3.29  
0.65  
0.85  
0.47  
0.40  
0.24  
1.3  
500  
500  
500  
9.4  
9.4  
9.4  
5.6  
6.0  
5.5  
4.8  
4.8  
4.9  
2
3
4
Document 1194S-1 Revised 09/12/16  
US +1-847-639-6400 sales@coilcraft.com  
UK +44-1236-730595 sales@coilcraft-europe.com  
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw  
China +86-21-6218 8074 sales@coilcraft.com.cn  
Singapore + 65-6484 8412 sales@coilcraft.com.sg  
© Coilcraft Inc. 2016  
This product may not be used in medical or high  
risk applications without prior Coilcraft approval.  
Specification subject to change without notice.  
Please check web site for latest information.  
Document 1194S-2  
SMT Data Line EMI Filter – CQ7584-AL  
Common mode  
impedance  
Cutoff  
frequency2  
(MHz)  
Inductance (mH)3  
Part  
Irms4  
DCR max5  
(Ohms)  
Isolation6  
(Vrms)  
number1  
max (kOhms)  
nom  
min  
(A)  
CQ7584-AL_  
6.81 @ 4.4 MHz  
760  
2.20  
1.54  
0.65  
0.40  
500  
1. When ordering, please specify packaging code:  
CQ7584-ALC  
Typical Attenuation  
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic  
0
Differential mode  
tape (250 parts per full reel).  
B = Less than full reel. In tape, but not machine ready.  
To have a leader and trailer added ($25 charge), use  
code letter C instead.  
D = 13″ machine-ready reel. EIA-481 embossed plastic  
tape Factory order only, not stocked (1000 parts per  
full reel).  
5
10  
15  
20  
25  
30  
2. Frequency at which the differential mode attenuation equals 3 dB  
3. Inductance shown for each winding, measured at 10 kHz, 0.1 Vrms,  
0 Adc on an Agilent/HP 4263B LCR meter or equivalent.  
4. Current that causes a 40°C temperature rise from 25°C ambient. This  
information is for reference only and does not represent absolute maxi-  
mum ratings.  
5. DCR is specified per winding.  
Common mode  
6. Isolation (hipot) measured for two seconds.  
7. Electrical specifications at 25°C.  
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.  
35  
40  
0.1  
1
10  
100  
Frequency (MHz)  
0.370  
max  
9,4  
Typical Impedance versus Frequency  
7584-AL  
XXXX  
Y
4
1
3
2
Internal code  
10  
8
7
Dot indicates pin 1  
0.295  
6
max  
7,5  
5
0.189  
4,8  
4
3
max  
0.004 / 0,10  
0.220  
5,6  
max  
2
1
0.10 0.004  
2,54 0,10  
0.020  
0,50  
0.112  
2,85  
0.1  
1
10  
100  
Frequency (MHz)  
0.10  
2,54  
1
0.289  
0.047  
1,2  
7,35  
Recommended  
Land Pattern  
inches  
mm  
Dimensions are in  
2
4
1
3
Document 1194S-2 Revised 09/12/16  
US +1-847-639-6400 sales@coilcraft.com  
UK +44-1236-730595 sales@coilcraft-europe.com  
© Coilcraft Inc. 2016  
This product may not be used in medical or high  
risk applications without prior Coilcraft approval.  
Specification subject to change without notice.  
Please check web site for latest information.  
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw  
China +86-21-6218 8074 sales@coilcraft.com.cn  
Singapore + 65-6484 8412 sales@coilcraft.com.sg  
Document 1194S-3  
SMT Data Line EMI Filter – CJ5100-AL  
Common mode  
impedance  
Cutoff  
frequency2  
(MHz)  
Inductance (mH)3  
Part  
Irms4  
DCR max5  
(Ohms)  
Isolation6  
(Vrms)  
number1  
max (kOhms)  
nom  
min  
(A)  
CJ5100-AL_  
4.49 @ 9.9MHz  
920  
0.47  
0.329  
0.85  
0.24  
500  
1. When ordering, please specify packaging code:  
CJ5100-ALC  
Typical Attenuation  
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic  
0
Differential mode  
tape (250 parts per full reel).  
5
10  
15  
20  
25  
30  
35  
40  
B = Less than full reel. In tape, but not machine ready.  
To have a leader and trailer added ($25 charge), use  
code letter C instead.  
D = 13″ machine-ready reel. EIA-481 embossed plastic  
tape Factory order only, not stocked (1000 parts per  
full reel).  
2. Frequency at which the differential mode attenuation equals 3 dB  
3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms,  
0 Adc on an Agilent/HP 4263B LCR meter or equivalent.  
4. Current that causes a 40°C temperature rise from 25°C ambient. This  
information is for reference only and does not represent absolute maxi-  
mum ratings.  
5. DCR is specified per winding.  
6. Isolation (hipot) measured for two seconds.  
7. Electrical specifications at 25°C.  
Common mode  
45  
50  
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.  
0.1  
1
10  
100  
0.280  
max  
Frequency (MHz)  
7,1  
4
1
3
2
5100-AL  
XXXXY  
Typical Impedance versus Frequency  
Internal code  
10  
Dot indicates  
pin 1  
0.189  
4,8  
max  
0.004 / 0,10  
0.370  
9,4  
0.236  
6,0  
1
max  
max  
0.098 0.004  
2,5 0,10  
0.024 0.004  
0,60 0,10  
0.112  
2,85  
0.1  
0.1  
1
10  
100  
0.098  
2,5  
Frequency (MHz)  
1
0.289  
0.047  
1,2  
7,35  
inches  
mm  
Recommended  
Land Pattern  
Dimensions are in  
2
3
1
4
Document 1194S-3 Revised 09/12/16  
US +1-847-639-6400 sales@coilcraft.com  
UK +44-1236-730595 sales@coilcraft-europe.com  
© Coilcraft Inc. 2016  
This product may not be used in medical or high  
risk applications without prior Coilcraft approval.  
Specification subject to change without notice.  
Please check web site for latest information.  
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw  
China +86-21-6218 8074 sales@coilcraft.com.cn  
Singapore + 65-6484 8412 sales@coilcraft.com.sg  
Document 1194S-4  
SMT Data Line EMI Filter – CR7856-AL  
Common mode  
impedance  
Cutoff  
frequency2  
(MHz)  
Inductance (mH)3  
Part  
Irms4  
DCR max5  
(Ohms)  
Isolation6  
(Vrms)  
number1  
max (kOhms)  
nom  
min  
(A)  
CR7856-AL_  
111.17 @ 1.9 MHz  
460  
4.70  
3.29  
0.47  
1.3  
500  
1. When ordering, please specify packaging code:  
CR7856-ALC  
Typical Attenuation  
0
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic  
Differential mode  
tape (250 parts per full reel).  
5
10  
15  
20  
25  
30  
35  
B = Less than full reel. In tape, but not machine ready.  
To have a leader and trailer added ($25 charge), use  
code letter C instead.  
D = 13″ machine-ready reel. EIA-481 embossed plastic  
tape Factory order only, not stocked (1000 parts per  
full reel).  
2. Frequency at which the differential mode attenuation equals 3 dB  
3. Inductance shown for each winding, measured at 10 kHz, 0.1 Vrms,  
0 Adc on an Agilent/HP 4263B LCR meter or equivalent.  
4. Current that causes a 40°C temperature rise from 25°C ambient. This  
information is for reference only and does not represent absolute maxi-  
mum ratings.  
5. DCR is specified per winding.  
6. Isolation (hipot) measured for two seconds.  
7. Electrical specifications at 25°C.  
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.  
40  
45  
Common mode  
10  
0.1  
1
100  
Frequency (MHz)  
Dot indicates  
pin 1  
Typical Impedance versus Frequency  
1
2
4
5
CR78  
56-AL  
XXXXY  
Internal code  
100  
0.295  
7,5  
max  
10  
1
0.193  
4,9  
max  
0.004 / 0,10  
0.370  
9,4  
0.217  
5,5  
max  
max  
0.10 0.004  
2,54 0,10  
0.020  
0,50  
0.1  
0.112  
2,85  
0.1  
1
10  
100  
Frequency (MHz)  
0.10  
2,54  
1
0.289  
0.047  
1,2  
7,35  
inches  
mm  
Recommended  
Land Pattern  
Dimensions are in  
4
3
1
2
Document 1194S-4 Revised 09/12/16  
US +1-847-639-6400 sales@coilcraft.com  
UK +44-1236-730595 sales@coilcraft-europe.com  
© Coilcraft Inc. 2016  
This product may not be used in medical or high  
risk applications without prior Coilcraft approval.  
Specification subject to change without notice.  
Please check web site for latest information.  
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw  
China +86-21-6218 8074 sales@coilcraft.com.cn  
Singapore + 65-6484 8412 sales@coilcraft.com.sg  

相关型号：

CQ7584-ALC

 Data Line Filter,
COILCRAFT

CQ7584-AL_16

 SMT Data Line EMI Filters
COILCRAFT

CQ82C55A

 CMOS Programmable Peripheral Interface
INTERSIL

CQ82C55AZ

 CMOS Programmable Peripheral Interface
INTERSIL

CQ89-2M

 2.0 AMP TRIAC 600 THRU 800 VOLTS
CENTRAL

CQ89-2MLEADFREE

 4 Quadrant Logic Level TRIAC, 600V V(DRM), 2A I(T)RMS, PLASTIC PACKAGE-3
CENTRAL

CQ89-2MTR

 4 Quadrant Logic Level TRIAC, 600V V(DRM), 2A I(T)RMS, PLASTIC PACKAGE-3
CENTRAL

CQ89-2MTR13

 TRIAC, 600V V(DRM), 2A I(T)RMS,
CENTRAL

CQ89-2MTR13LEADFREE

 TRIAC, 600V V(DRM), 2A I(T)RMS,
CENTRAL

CQ89-2MTRLEADFREE

 TRIAC, 600V V(DRM), 2A I(T)RMS,
CENTRAL

CQ89-2MTRPBFREE

 暂无描述
CENTRAL

CQ89-2M_10

 SURFACE MOUNT 2 AMP SILICON TRIAC 600 THRU 800 VOLTS
CENTRAL
©2020 ICPDF网 联系我们和版权申明