MSS1210-395KE [COILCRAFT]

Shielded Power Inductors;


型号：	MSS1210-395KE
厂家：	Coilcraft lnc.
描述：	Shielded Power Inductors
文件：	总2页 (文件大小：297K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Document 902-1

Shielded Power Inductors

–

MSS1210

• 12.3 × 12.3 mm footprint; 10 mm high shielded inductors

• 27 inductance values from 10 µH to 10 mH

• Low DCR and excellent current handling

Core material Ferrite

Core and winding loss See www.coilcraft.com/coreloss

Environment RoHS compliant, halogen free

Terminations RoHS compliant matte tin over nickel over phos bronze.

Other terminations available at additional cost.

Weight: 5.1– 6.2 g

Ambient temperature –40°C to +85°C with (40°C rise) Irms current.

Maximum part temperature +125°C (ambient + temp rise). Derating.

Storage temperature Component: –40°C to +125°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 300/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick,

20 mm pocket spacing, 10.3 mm pocket depth

PCB washing Tested to MIL-STD-202 Method 215 plus an additional

aqueous wash. See Doc787_PCB_Washing.pdf.

Isat (A)⁵

Irms (A)⁶

1. Specify termination and packaging codes:

MSS1210-105KED

Termination: E = RoHS compliant matte

tin over nickel over phos

bronze.

SRF

typ⁴

DCR (Ohms)³

Inductance²

(µH)

10% 20% 30% 20°C 40°C

(MHz) drop drop drop rise rise

Part number¹

typ

max

MSS1210-103ME_

MSS1210-153ME_

MSS1210-223ME_

MSS1210-333ME_

MSS1210-473ME_

10 20% 0.014 0.016 15.0

15 20% 0.019 0.022 12.0

9.6 11.5

12.5

10.7

8.8

6.9

5.8

4.70 6.50

4.20 5.70

3.20 4.40

2.90 3.80

2.20 3.00

8.3

6.8

5.4

4.5

9.9

8.1

6.4

5.4

22 20% 0.026 0.030

33 20% 0.033 0.039

47 20% 0.048 0.056

9.5

7.5

6.0

Special order:

Q=RoHS tin-silver-

copper (95.5/4/0.5) or

P=non-RoHS tin-lead

(63/37).

MSS1210-683ME_

MSS1210-104KE_

MSS1210-124KE_

MSS1210-154KE_

MSS1210-184KE_

68 20% 0.068 0.080

100 10% 0.106 0.125

120 10% 0.115 0.135

150 10% 0.157 0.185

180 10% 0.173 0.203

4.5

3.6

3.3

2.9

2.8

3.8

3.1

2.9

2.6

2.3

4.5

3.7

3.4

3.1

2.8

4.9

4.0

3.7

3.4

3.0

2.10 2.80

1.80 2.40

1.70 2.30

1.26 1.75

1.20 1.70

Packaging: D = 13″ machine-ready reel.

EIA-481 embossed

plastic tape (300 parts

per full reel).

B = Less than full reel. In

tape, but not machine

ready. To have a leader

and trailer added ($25

charge), use code letter

D instead.

MSS1210-224KE_

MSS1210-334KE_

MSS1210-474KE_

MSS1210-684KE_

MSS1210-105KE_

220 10% 0.191 0.225

330 10% 0.289 0.340

470 10% 0.434 0.510

680 10% 0.536 0.630

1000 10% 0.816 0.960

2.7

1.8

1.6

1.4

1.1

2.1

1.7

1.4

1.2

2.5

2.1

1.7

1.4

2.8

2.2

1.8

1.6

1.3

1.10 1.50

0.85 1.20

0.70 0.98

0.69 0.91

0.60 0.83

0.98 1.2

2. Inductance tested at 100 kHz, 0.1 Vrms,

0 Adc using an Agilent/HP 4263B LCR

meter or equivalent.

3. DCR measured on a micro-ohmmeter and a

Coilcraft CCF858 test ﬁxture.

MSS1210-125KE_

MSS1210-155KE_

MSS1210-185KE_

MSS1210-225KE_

MSS1210-275KE_

1200 10% 1.07 1.26

1500 10% 1.23 1.45

1800 10% 1.39 1.63

2200 10% 1.82 2.14

2700 10% 2.02 2.38

1.0

0.91 1.1

0.81 0.96

0.73 0.87

0.66 0.79

0.59 0.71

1.2

1.0

0.49 0.67

0.46 0.65

0.85

0.70

0.65

0.95 0.45 0.63

0.86 0.38 0.52

0.77 0.36 0.50

4. SRF measured using Agilent/HP 4191A or

equivalent.

MSS1210-335KE_

MSS1210-395KE_

MSS1210-475KE_

MSS1210-565KE_

MSS1210-685KE_

3300 10% 2.69 3.17

3900 10% 2.98 3.50

4700 10% 3.34 3.93

5600 10% 3.71 4.37

6800 10% 4.97 5.85

0.56

0.54

0.51

0.45

0.40

0.54 0.64

0.50 0.60

0.45 0.54

0.41 0.49

0.38 0.45

0.70 0.31 0.43

0.64 0.30 0.41

0.58 0.28 0.39

0.54 0.27 0.38

0.49 0.22 0.31

5. DC current at 25°C that causes the speci-

ﬁed inductance drop from its value without

current.

Click for temperature derating information.

6. Current that causes the speciﬁed tempera-

ture rise from 25°C ambient. This informa-

tion is for reference only and does not

represent absolute maximum ratings.

Click for temperature derating information.

MSS1210-825KE_

MSS1210-106KE_ 10000 10% 7.39 8.69

8200 10% 5.51 6.48

0.38

0.31

0.35 0.41

0.31 0.37

0.45 0.21 0.28

0.40 0.18 0.24

7. Electrical speciﬁcations at 25°C.

Refer to Doc 362 “Soldering Surface Mount

Components” before soldering.

Document 902-1 Revised 07/11/16

US +1-847-639-6400 sales@coilcraft.com

UK +44-1236-730595 sales@coilcraft-europe.com

Taiwan +886-2-2264 3646 sales@coilcraft.com.tw

China +86-21-6218 8074 sales@coilcraft.com.cn

Singapore + 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

Document 902-2

Shielded Power Inductors – MSS1210

Typical L vs Current

10000

Typical L vs Frequency

10000

3300 µH

1000 µH

330 µH

100 µH

33 µH

10 µH

1000 µH

1000

330 µH

100 µH

100

33 µH

10 µH

0.1

100

0.1

100

Current (A)

Frequency (MHz)

0.ꢁ72 0.012

12,0 0,3

Dash

123

number

0.ꢁ72 0.012

12,0 0,3

Parts manufactured prior

to August 2011 may have

a different part marking.

Internal

code

0.025*

0.39ꢁ 0.008*

0,ꢀ35

10,0 0,2

Recommended

Land Pattern

0.197 0.008

5,0 0,2

0.217

5,5

0.27ꢀ 0.01ꢀ

7,0 0,ꢁ

0.375

9,5

0.098 0.01ꢀ

2,5 0,ꢁ

0.118

3,0

For optional tin-lead and tin-silver-copper terminations,

dimensions are for the mounted part. Dimensions before

mounting can be an additional 0.012 inch (0,3 mm).

inches

Dimensions are in

Document 902-2 Revised 07/11/16