SER3018H-332KE [COILCRAFT]
Mounting plate with three pads for excellent board adhesion;型号: | SER3018H-332KE |
厂家: | Coilcraft lnc. |
描述: | Mounting plate with three pads for excellent board adhesion |
文件: | 总3页 (文件大小:522K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 874-1
Shielded Power Inductors
–
SER3018H
• Same electrical specifications and land pattern as the SER2918H
• Mounting plate with three pads for excellent board adhesion
• Extremely low DCR; current handling up to 93.6 Amps
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight 36.2 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 25 pieces per tray
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
21°C rise 41°C rise
Inductance2
±±10(µH)
SRF typ4
(MHz)
Part number1
nom
max
±10 drop 210 drop 310 drop
SER3018H-332KE
SER3018H-472KE
SER3018H-682KE
SER3018H-103KE
SER3018H-153KE
3.3
4.7
6.8
10
2.56
2.56
2.56
2.56
2.56
2.82
2.82
2.82
2.82
2.82
40
30
25
20
16
91.0
59.0
42.0
28.0
18.0
92.5
61.2
45.0
31.2
21.2
93.6
62.4
45.9
32.1
21.9
20
20
20
20
20
28
28
28
28
28
15
SER3018H-223KE
SER3018H-333KE
22
33
2.56
2.56
2.82
2.82
15
10
12.0
7.0
14.0
8.7
15.0
9.6
20
20
28
28
1. When ordering, please specify termination code:
SER31±8H-333KE
Termination: E= Halogen free component. RoHS compliant matte tin over nickel over phos bronz.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
2. Inductance measured at 500 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
3. DCR measured on a Keithley 580 micro-ohmmeter or equivalent.
4. SRF measured using an Agilent/HP 4395A network analyzer and an Agilent/HP 16193A test fixture.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 874-1 Revised 11/24/14
Document 874-2
Shielded Power Inductors – SER3018H Series
inches
mm
Dimensions are in
Temperature Rise vs Current
Current Derating
80
120
110
70
100
90
80
70
60
50
40
30
60
50
40
30
20
10
0
20
Isat
Irms
10
0
0
10
20
30
40
50
60
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
Current (Arms)
Document 874-2 Revised 11/24/14
Document 874-3
Shielded Power Inductors – SER3018H Series
L vs Frequency
L vs Current
100
100
33 µH
22 µH
15 µH
10 µH
33 µH
22 µH
15 µH
10 µH
6.8 µH
4.7 µH
10
1
6.8 µH
4.7 µH
10
3.3 µH
3.3 µH
1
0.1
0.1
0.1
1
10
100
1
10
100
Current (A)
Frequency (MHz)
ESR vs Frequency
50
40
30
20
10
0
0.1
1
10
Frequency (MHz)
Document 874-3 Revised 11/24/14
相关型号:
SER30KB30S
Rectifier Diode, 1 Phase, 1 Element, 30A, 300V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
SER30KB30TXV
Rectifier Diode, 1 Phase, 1 Element, 30A, 300V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
SER30KB40S
Rectifier Diode, 1 Phase, 1 Element, 30A, 400V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
SER30KB40TXV
Rectifier Diode, 1 Phase, 1 Element, 30A, 400V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
SER30KB50S
Rectifier Diode, 1 Phase, 1 Element, 30A, 500V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
SER30KB50TX
Rectifier Diode, 1 Phase, 1 Element, 30A, 500V V(RRM), Silicon, HERMETIC SEALED PACKAGE-1
SSDI
©2020 ICPDF网 联系我们和版权申明