HSM623 [CONNOR-WINFIELD]
Oscillator;型号: | HSM623 |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | Oscillator |
文件: | 总2页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3 .3 V S u rfa c e Mo u n t
Crys t a l Clo c k Os c illa t o r
HS M6
XO
Features:
1.544 to 170 MHz
3.3V Operation
Tri-State Enable/Disable
Power Saving Function: 10uA When Disabled
The Connor-Winfield HSM613, HSM623,
and HSM633 are 7.5mm x 5mm, 3.3V
HCMOS, Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed for use in
all applications requiring precision clocks.
The surface mount package is designed for
high-density mounting and is optimum for
mass production
2111 Com prehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Overall Frequency Tolerance:
HSM613 ± 25 ppm
Fax: 630- 851- 5040
HSM623 ± 50 ppm
HSM633 ± 100 ppm
w w w .c o n w in .c o m
Temperature Range: -40 to 85°C
Ceramic Surface Mount Package
Tape and Reel Packaging
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Notes
Storage Temperature
Supply Voltage (Vcc)
-
-
-0.5
7.0
Vdc
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
Notes
Frequency Range (Fo)
HSM613
1.544
-
MHz
125
170
170
HSM623
HSM633
Frequency Tolerance
HSM613
-
ppm
1
-25
-50
-100
25
50
100
HSM623
HSM633
Operating Temp Range
Supply Voltage (Vdd)
-40
3.0
-
-
3.3
-
85
°C
Vdc
mA
3.6
Supply Current (Icc)
1.544 to 31.999 MHz
32 to 49.999 MHz
50 to 66.999 MHz
67 to 124.999 MHz
125 to 170 MHz
15
20
25
40
50
Input Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Vdc
Vdc
mS
Notes
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
≥ 70% Vdd
-
-
-
-
-
-
≤ 30% Vdd
10
2
-
-
-
-
Disable Time
150
nS
Output Disable Current (lcc)
10
uA
HCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
-
-
15
pF
High (Voh)
Voltage
2.91
-
-
-
-
Vdc
mA
Low (Vol)
0.33
US Headquarters:
630-851-4722
European Headquarters:
High (loh)
Current
-2
-
-
-
-
2
Low (lol)
+353-61-472221
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
45
-
50
-
55
6
%
nS
Bulletin
Sm044
-
-
10
5
mS
Page
1 of 2
Jitter
-
-
pS RMS
Revision
07
Notes:
1. Inclusive of calibration @ 25°C , frequency stability vs temperature, supply voltage change, load change, shock and vibration, 10 years aging.
2. Oscillator output is enabled with no connection on pad 1
Date
18 March 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
2111 Com prehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
w w w .c o n w in .c o m
Package Characteristics
Hermetically sealed ceramic package and metal cover
Suggested Pad Layout
Package
Environmental Characteristics
Temperature Cycle
The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical
No bubbles appear in Flourinert (FC-43) at 125°C ±5°C for 5 minutes
Solvent Resistance
Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
General Conditions 260°C max x 10 sec max x 2 times max or
230°C max x 180 sec max x 1 time
Typical Operation Data
(Vapor phase reflow)
20 to 100 sec up to 215°C, 50 sec
Test Circuit
at 215°C, then down to room temperature per 1 to 5°C / sec
Mechanical Characteristics
Free Drop
Vibration
The specimen shall meet electrical characteristics after tested 3 times,
Free Drop testing on the hard wooden board from a height of 75 cm.
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
Thermal Shock
Solderability
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
Output Waveform
3) Solder bath temperature: 235°C ±5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec ±0.5 sec into solder bath
After performing the above procedures, a newly soldered coverage shall be greater than 90%
Pin Connections
1: Tri-State E/D
2: Ground
3: Outp ut
4: VDD
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
Tape and Reel Dimensions
Ordering Information
HSM633 - 125.00 MHz
CLOCK
SERIES
CENTER
FREQUENCY
Bulletin
Page
Sm044
2 of 2
Dimensional Tolerance: ±.02” (.
±.005” (.1
Revision
Date
07
18 March 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
相关型号:
HSM623-1.544M
HCMOS Output Clock Oscillator, 1.544MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-133.33MHZ
HCMOS Output Clock Oscillator, 1.544MHz Min, 170MHz Max, 133.33MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-170.0M
HCMOS Output Clock Oscillator, 170MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明