HTFH5F-12.800MHZ [CONNOR-WINFIELD]

HCMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, METAL, HERMETIC SEALED, DIP-14/4;


型号：	HTFH5F-12.800MHZ
厂家：	CONNOR-WINFIELD CORPORATION
描述：	HCMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, METAL, HERMETIC SEALED, DIP-14/4 机械振荡器
文件：	总4页 (文件大小：161K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

14 Pin DIP Package

HTFLxx Series HTVLxx Series

HTFHxx Series HTVHxx Series

TCXO / VCTCXO

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630- 851- 5040

Description

The Connor Winfield 14 Pin DIP

Temperature Compensated Crystal

Controlled Oscillators (TCXO

series) and Voltage Controlled

Temperature Compensated Crystal

Controlled Oscillators (VCTCXO

series) are designed for use in

www.conwin.com

US Headquarters:

630-851-4722

European Headquarters:

+353-61-472221

applications where high frequency

Features:

stability performance is required.

Through the use of Analog

Temperature Compensation this

device is capable of holding sub 1-

ppm stabilities over the

commercial or the industrial

temperature ranges. Many features

are available to meet your design

requirements.

Available RoHS Options:

RoHS Compliant / Lead Free

RoHS Compliant / Terminations Contain Lead

Fixed Frequency with Tr-State E/D (TCXO)

orVoltage Controlled (VCTCXO)

Available Supply Voltages:3.3v or 5.0v

Low Jitter >1ps Rms

Available Frequency Stabilities:

6.4 Mhz to 50 Mhz, 0.28 Ppm pk-pk, ±0.20

ppm,

±0.25 ppm, ±0.28 ppm, ±0.50 ppm,

±1.00 ppm, ±2.50 ppm, ±4.60 ppm

Available Frequency Stabilities:

>50 Mhz to 156.25 Mhz, ±0.50 ppm

±1.00 ppm, ±2.50 ppm, ±4.60 ppm

AvailableTemperature Ranges:

0 to 70°C or -40 To 85°C

Tri-State Enable / Disable Function or

Voltage Control Pin 1

Hermetically Sealed 14 Pin Dip Package

Absolute Maximum Ratings

Table 1.0

Parameter

Minimum

Nominal

Maximum

125

Units

°C

Notes

Storage Temperature

Supply Voltage (Vcc)

Input Voltage (Vcc)

-55

-0.5

6.0

Vdc

Vcc+0.6

Ordering Information

HTFL6D - 12.800 MHz

Bulletin

Tx137

TCXO

SERIES

CENTER

FREQUENCY

Page

1 of 4

Revision

Date

08 January 2008

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630- 851- 5040

www.conwin.com

Operating Specifications

Table 2.0

Parameter

Minimum

6.40

Nominal

Maximum

156.25

1.0

Units

MHz

ppm

Notes

Notes:

Center Freq (See Table 8) (Fo)

Frequency Calibration – All Models

1) Initial calibration @ 25°C.

Specifications at time of shipment

after 48 hours of operation.

-1.0

2) Frequencystabilityvs. changein

temperature. ±[(Fmax-Fmin)/2], where

the Fmax and Fmin values are in ppm.

Frequency Stability vs. Temperature ± ±(Fmaꢀ-Fmin)ꢁ2ꢂ (See Table 8)

Freq. Stability vs. Voltage - All Models

± 0.20

ppm

3) Frequency stability for a +/- 5%

supply voltage change.

Total Frequency Tolerance – HTꢀꢀꢀA

through HTꢀꢀꢀF

4) Inclusive of calibration, operating

temperature range, supply voltage

change, shock and vibration and

aging (20 years).

± 4.6

± 6.1

ppm

Total Frequency Tolerance – HTꢀꢀꢀG

Total Frequency Tolerance – HTꢀꢀꢀH

Aging (20 years) – All Models

5) Oscillator output is enabled with no

connection on pin 1. Output is at

high impedance when disabled.

± 20.0

± 3.0

Operating Temperature Range (See Table 8)

Model: HTꢀꢀ5ꢀ- Series

Model: HTꢀꢀ6ꢀ- Series

°C

-40

Supply Voltage (See Table 7)

Model: HTFLꢀꢀ or HTVLꢀꢀ - Series (Vcc)

Model: HTFHꢀꢀ or HTVHꢀꢀ - Series (Vcc)

3.135

4.75

3.300

5.00

3.465

5.25

Vdc

Supply Current (6.4 to 50 MHz) (Icc)

Supply Current (>50 to 156.25MHz) (Icc)

Phase Jitter (BW =12KHz to Foꢁ2)

Phase Jitter (BW =10Hz to Foꢁ2)

Period Jitter

pS RMS

dBcꢁHz

SSB Phase Noise at 1Hz offset

SSB Phase Noise at 10 Hz offset

SSB Phase Noise at 100 Hz offset

SSB Phase Noise at 1 KHz offset

SSB Phase Noise at 10K Hz offset

SSB Phase Noise at 100 KHz offset

Start-Up Time: Oscillator

-50

-80

-110

-135

-150

1.0

2.0

TDEV @ 1 second

TDEV @ 4 seconds

Input Characteristics forVCTCXO Models

Table 3.0

Parameter

Minimum

Nominal

Maximum

Units

Vdc

ppm

Notes

Control Voltage Range (Vcc = 3.3V) (Vc) 0.3

Control Voltage Range (Vcc = 5.0V) (Vc) 0.5

1.65

3.0

4.5

2.5

Frequency Tuning

Linearity

± 10

± 1

Slope

Positive

>100K

Input Resistance

Ohm

Input Characteristics forTCXO Models

Table 4.0

Parameter

Minimum

Nominal

Maximum

Units

Vdc

Notes

Bulletin

Tx137

Enable Voltage (High) (Vih)

Disable Voltage (Low) (Vil)

> 70% Vdd

Page

2 of 4

Revision

Date

< 30% Vdd

Vdc

08 January 2008

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630- 851- 5040

www.conwin.com

HCMOS Output Characteristics

Table 5.0

Parameter

Minimum

Nominal

Maximum

Units

Notes

LOAD

Output Voltage 6.4 to 52 MHz

Voltage: (High) (Voh)

(Low) (Vol)

90%Vcc

10%Vcc

Drive Current for 6.4 to 52 MHz

(High) (loh)

-4

(Low) (lol)

Output Voltage >52 MHz Vcc=3.3Vdc

Voltage: (High) (Voh)

(Low) (Vol)

2.0

0.4

Output Voltage >52 MHz Vcc=5.0Vdc

Voltage: (High) (Voh)

(Low) (Vol)

2.4

0.4

Drive Current >52 MHz

(High) (Ioh)

-8

(Low) (Iol)

Duty Cycle at 50% of Vcc

Rise ꢁ Fall Time 10% to 90%

Package Characteristics

Table 6.0

Package

Hermetically sealed, 14 Pin DIP metal package

Process Recommendation

Solder Reflow

Products suitable for convection reflow soldering. Peak temperature 260°C.

Maꢀimum time above 220°C, 20 seconds

Model Number SelectTable

Table 7.0

Fixed Frequency Models

HTFLꢀꢀ

Voltage Controlled Models

HTVLꢀꢀ

SupplyVoltage

3.3 Vdc

Output LogicTyp

HCMOS

HTFHꢀꢀ

HTVHꢀꢀ

5.0 Vdc

HCMOS

ꢀꢀ — Add the frequency vs. temperature range to the end of the model number.

Frequency vs.Temperature Range

Table 8.0

Select TableFrequency Range: 6.4 to 50 MHz

Operating

Temperature

Ranges

0.28

ppm

pk-pk*

±0.20

ppm

***

±0.25

ppm

***

±0.28

ppm

***

±0.50

ppm

***

±1.00

ppm

***

±2.50

ppm

***

±4.60

ppm

***

0 to 70°C

-40 to 85°C

Select TableFrequency Range: >50 to 155.52 MHz

Operating

Temperature

Ranges

+0.50

ppm

***

±1.00

ppm

***

±2.50

ppm

***

±4.60

ppm

***

0 to 70°C

Bulletin

Page

Tx137

-40 to 85°C

3 of 4

Revision

Date

* — Frequency vs. temperature, absolute.

** — Frequency stabilities not available at -40 to 85°C

*** — ± ±(Fmaꢀ-Fmin)ꢁ2ꢂ, where the Fmaꢀ and Fmin values are in ppm.

08 January 2008

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630- 851- 5040

www.conwin.com

Package Dimensions

Table 9.0

RoHS 5/6 Solder Profile

Pin Function

.310 MAX

(7.87mm)

Ramp-Up Rate

3˚C/second max.

from 150˚C to 225˚C.

Ramp-Down Rate

6˚C/second max.

E ꢁ D or Voltage Control

Ground

Output

Temperature

225˚C

183˚C

150˚C

14 Vcc

Dimensional Tolerance:

± 0.005ꢃ (± 0.2mm)

± 0.02ꢃ (± 0.5mm)

100˚C

25˚C

Phase Noise Plot

Time

60-120s

Max.

10-30s

Phase Noise Plot HTFL6D-012.8M

60-150s Max.

360 Sec. Max.

RoHS Solder Profile

Order Information Specifications

HTVH 5D G5 – 020.0M

Model Number, Fixed or Voltage Controlled Output, Supply Voltage - Code

Frequency Stability vs. Temperature Range - Code

G5 = RoHS 5/6 Compliant / Terminations Contain Lead

Blank = RoHS Compliant / Lead Free

Output Frequency

OutputWaveform

HTVH5DG5-020.0M = 20 MHz MHz, Voltage Controlled VCTCXO, 5.0V, HCMOS, ±0.28ppm, 0 to 70˚C,

RoHS 5/6 Compliant / Terminations contain lead.

HTFL6D-012.8M = 12.8 MHz, Fixed Frequency TCXO, 3.3V, HCMOS, ±0.28ppm, -40 to 85˚C, RoHS

Compliant / Lead Free

"1" LEVEL

90%

50%

10%

Test Circuit

"0" LEVEL

SYMMETRY

Enable /Disable or

Voltage Control

Bulletin

Page

Tx137

4 of 4

Revision

Date

08 January 2008

相关型号：