HTVH5B-FREQ [CONNOR-WINFIELD]

HCMOS Output Clock Oscillator, 1MHz Min, 56MHz Max, ROHS COMPLIANT, HERMETIC SEALED, METAL, DIP-14/4;
HTVH5B-FREQ
型号: HTVH5B-FREQ
厂家: CONNOR-WINFIELD CORPORATION    CONNOR-WINFIELD CORPORATION
描述:

HCMOS Output Clock Oscillator, 1MHz Min, 56MHz Max, ROHS COMPLIANT, HERMETIC SEALED, METAL, DIP-14/4

机械 电视 振荡器
文件: 总4页 (文件大小:257K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
14 Pin DIP Package  
HTFLxx Series HTVLxx Series  
HTFHxx Series HTVHxx Series  
TCXO / VCTCXO  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
Description  
The Connor Winfield 14 Pin DIP  
Temperature Compensated Crystal  
Controlled Oscillators (TCXO  
series) and Voltage Controlled  
Temperature Compensated Crystal  
Controlled Oscillators (VCTCXO  
series) are designed for use in  
www.conwin.com  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  
applications where high frequency  
Features:  
stability performance is required.  
Through the use of Analog  
Temperature Compensation  
this device is capable of holding  
sub 1-ppm stabilities over the  
commercial or the industrial  
temperature ranges. Many features  
are available to meet your design  
requirements.  
Available RoHS Options:  
RoHS Compliant / Lead Free  
RoHS Compliant / Terminations  
Contain Lead  
Fixed Frequency with Tr-State E/D (TCXO)  
or Voltage Controlled (VCTCXO)  
Available Supply Voltages:3.3V or 5.0V  
Low Jitter <1ps Rms  
Available Frequency Stabilities:  
1.0 Mhzto56 Mhz,0.28 ppmpk-pk, 0.20ppm,  
0.25 ppm, 0.28 ppm, 0.50 ppm,  
1.00 ppm, 2.50 ppm, 4.60 ppm  
Available Temperature Ranges:  
0 to 70°C or -40 To 85°C  
Tri-State Enable / Disable Function or  
Voltage Control Pin 1  
Hermetically Sealed 14 Pin Dip Package  
Absolute Maximum Ratings  
Table 1.0  
Parameter  
Minimum  
Nominal  
Maximum  
125  
6.0  
Vcc+0.6  
Units  
°C  
Vdc  
Vdc  
Notes  
Storage Temperature  
Supply Voltage (Vcc)  
Input Voltage (Vcc)  
-55  
-0.5  
-0.5  
-
-
-
Ordering Information  
HTFL6D - 12.800 MHz  
Bulletin  
Tx137  
1 of 4  
Page  
TCXO  
SERIES  
CENTER  
FREQUENCY  
Revision  
09  
Date  
01 Dec 2010  
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Operating Specifications  
Table 2.0  
Parameter  
Center Freq (See Table 8) (Fo)  
Frequency Calibration – All Models  
Frequency Stability vs. Temperature ±[(Fmax-Fmin)/2] (See Table 8)  
Freq. Stability vs. Voltage - All Models  
Total Frequency Tolerance – HTxxxA  
through HTxxxF  
Total Frequency Tolerance – HTxxxG  
Total Frequency Tolerance – HTxxxH  
Fisrt Year Aging – All Models  
Minimum  
1.00  
Nominal Maximum  
Units  
MHz  
ppm  
Notes  
Notes:  
1) Initial calibration @ 25°C.  
Specifications at time of shipment  
after 48 hours of operation.  
-
56  
-1.0  
1.0  
1
2
3
2) Frequency stability vs. change in  
temperature. [(Fmax-Fmin)/2],  
where the Fmax and Fmin values  
are in ppm.  
-
-
±0.20  
ppm  
3) Frequency stability for a +/- 5%  
supply voltage change.  
-
-
-
-
-
-
-
-
±±.6  
±6.1  
±20.0  
±1.0  
ppm  
ppm  
ppm  
ppm  
±
±
±
4) Inclusive of calibration, operating  
temperature range, supply voltage  
change, shock and vibration and  
aging (20 years).  
5) Oscillator output is enabled with no  
connection on pin 1. Output is at  
high impedance when disabled.  
Operating Temperature Range (See Table 8)  
Model: HTxx5x- Series  
Model: HTxx6x- Series  
0
-±0  
-
-
70  
85  
°C  
°C  
Supply Voltage (See Table 7)  
Model: HTFLxx or HTVLxx - Series (Vcc)3.135  
Model: HTFHxx or HTVHxx - Series (Vcc)±.75  
3.300  
5.00  
3.±65  
5.25  
Vdc  
Vdc  
Supply Current (1.0 to 56 MHz) (Icc)  
Phase Jitter (BW =12KHz to Fo/2)  
Phase Jitter (BW =10Hz to Fo/2)  
Period Jitter  
SSB Phase Noise at 1Hz offset  
SSB Phase Noise at 10 Hz offset  
SSB Phase Noise at 100 Hz offset  
SSB Phase Noise at 1 KHz offset  
SSB Phase Noise at 10K Hz offset  
SSB Phase Noise at 100 KHz offset  
Start-Up Time: Oscillator  
-
-
-
-
-
-
-
-
-
-
-
-
-
6
-
-
20  
1
3
3
-
-
-
-
-
mA  
pS RMS  
pS RMS  
pS RMS  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
mS  
-
-50  
-80  
-110  
-135  
-150  
-150  
-
-
10  
1.0  
2.0  
TDEV @ 1 second  
TDEV @ ± seconds  
-
-
nS  
nS  
Input Characteristics for VCTCXO Models  
Table 3.0  
Parameter  
Control Voltage Range (Vcc = 3.3V) (Vc) 0.3  
Control Voltage Range (Vcc = 5.0V) (Vc) 0.5  
Frequency Tuning measured @ 25°C  
Minimum  
Nominal Maximum  
Units  
Vdc  
Vdc  
ppm  
%
Notes  
1.65  
2.5  
-
-
3.0  
±.5  
-
±10  
±5  
Linearity  
-
Slope  
Input Resistance  
Positive  
>100K  
-
-
Ohm  
Input Characteristics for TCXO Models  
Table 4.0  
Parameter  
Enable Voltage (High) (Vih)  
Disable Voltage (Low) (Vil)  
Minimum  
> 70% Vdd  
-
Nominal Maximum  
Units  
Vdc  
Vdc  
Notes  
-
-
5
5
Bulletin  
Tx137  
2 of 4  
Page  
-
< 30% Vdd  
Revision  
09  
Date  
01 Dec 2010  
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
CMOS Output Characteristics  
Table 5.0  
Parameter  
Minimum  
Nominal  
Maximum Units  
Notes  
LOAD  
-
15  
-
pF  
1
Output Voltage 1.0 to 56 MHz  
Voltage: (High) (Voh)  
(Low) (Vol)  
90%Vcc  
-
-
-
-
V
V
10%Vcc  
Drive Current for 1.0 to 56 MHz  
(High) (loh)  
(Low) (lol)  
Duty Cycle at 50% of Vcc  
Rise / Fall Time 10% to 90%  
-±  
-
±5  
-
-
-
50  
-
-
±
55  
8
mA  
mA  
%
nS  
1) For best performance it is recommended that the device connected to this output should have an equivalent input capacitance of 15pF.  
Package Characteristics  
Table 6.0  
Package  
Hermetically sealed, 1± Pin DIP metal package  
Process Recommendation  
Solder Reflow  
Products suitable for convection reflow soldering. Peak temperature 260°C.  
Maximum time above 220°C, 20 seconds  
Model Number Select Table  
Table 7.0  
Fixed Frequency Models Voltage Controlled Models  
SupplyVoltage  
3.3 Vdc  
Output LogicTyp  
HCMOS  
HTFLxx  
HTVLxx  
HTFHxx  
HTVHxx  
5.0 Vdc  
HCMOS  
xx — Add the frequency vs. temperature range to the end of the model number.  
Frequency vs. Temperature Range  
Table 8.0  
Select Table Frequency Range: 1.0 to 56 MHz  
Operating  
Temperature  
Ranges  
0.28  
ppm  
pk-pk*  
5A  
0.20  
ppm  
***  
0.25  
ppm  
***  
0.28  
ppm  
***  
0.50  
ppm  
***  
1.00  
2.50  
ppm  
***  
4.ꢀ0  
ppm  
***  
ppm  
***  
5F  
0 to 70°C  
5B  
5C  
5D  
5E  
5G  
5H  
-±0 to 85°C  
**  
**  
**  
6D  
6E  
6F  
6G  
6H  
* — Frequency vs. temperature, absolute.  
** — Frequency stabilities not available at -40 to 85°C  
*** — ± ±[Fmax-Fmin)ꢀ2ꢁ, ꢂhere the Fmax and Fmin values are in ppm.  
Bulletin  
Page  
Tx137  
3 of 4  
09  
Revision  
Date  
01 Dec 2010  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Package Dimensions  
Table 9.0  
RoHS 5/6 Solder Profile  
.310 MAX  
Pin Function  
(7.87mm)  
Ramp-Up Rate  
3˚C/second max.  
from 150˚C to 225˚C.  
Ramp-Down Rate  
ꢀ˚C/second max.  
1
7
8
E / D or Voltage Control  
Ground  
Output  
Temperature  
225˚C  
225˚C  
tp  
183˚C  
150˚C  
14 Vcc  
Dimensional Tolerance:  
±0.005ꢀ (±0.2mm)  
±0.02ꢀ (±0.5mm)  
100˚C  
25˚C  
0
Time  
Phase Noise Plot  
ꢀ0-120s  
Max.  
10-30s  
Phase Noise Plot HTFL6D-012.8M  
ꢀ0-150s Max.  
3ꢀ0 Sec. Max.  
RoHS Solder Profile  
HTVH 5D G5 020.0M  
Order Information Specifications  
Model Number, Fixed or Voltage Controlled Output, Supply Voltage - Code  
Frequency Stability vs. Temperature Range - Code  
G5 = RoHS 5/ꢀ Compliant / Terminations ContainLead  
Blank = RoHS Compliant / Lead Free  
Output Frequency  
Output Waveform  
HTVH5DG5-020.0M = 20 MHz MHz, Voltage Controlled VCTCXO, 5.0V, HCMOS, 0.28ppm, 0 to 70˚C,  
RoHS 5/ꢀ Compliant / Terminations contain lead.  
T
T
R
HTFLꢀD-012.8M = 12.8 MHz, Fixed Frequency TCXO, 3.3V, HCMOS, 0.28ppm, -40 to 85˚C, RoHS  
Compliant / Lead Free  
F
"1" LEVEL  
90%  
50%  
10%  
Test Circuit  
"0" LEVEL  
SYMMETRY  
14  
1
8
7
Enable /Disable or  
Voltage Control  
Bulletin  
Page  
Tx137  
4 of 4  
09  
Revision  
Date  
01 Dec 2010  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY