M95E-012.500M [CONNOR-WINFIELD]
Oscillator;
| 型号： | M95E-012.500M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | Oscillator |
| 文件： | 总4页 (文件大小：170K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Precision Sub-Miniature
3.2x5.0mm
TCXO / VCTCXO
Description
Features:
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
0.50ppm, 1.00ppm or 2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
The Connor-Winfield
3.2x5.0mm Temperature
Compensated Crystal Oscillators and
Voltage Controlled Temperature
Compensated Crystal Oscillators are
designed for use in applications
requiring tight frequency stability in a
small package. Through the use of
Analog Temperature Compensation,
this device is capable of holding sub
1-ppm stabilities over wide
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
temperature ranges.
Ordering Information
Applications
GPS Receivers
Instrumentation
Femtocells
M77F - 010.0M
TCXO
SERIES
CENTER
FREQUENCY
Example Part Number
FTTH, FTTC
Pin Connections
Package Layout
0.065
(1.65mm)
0.028
(0.71mm)
0.126
(3.2mm)
0.083 Max.
(2.1mm)
Pad Connection
0.006 Typ.
(0.15mm)
1
2
3
4
5
6
7
8
Voltage Control or N/C
N/C
0.042
(1.07mm)
0.016
(0.41mm)
Do not connect
Ground
Output
0.197
(5.0mm)
0.050
(1.27mm)
0.028
(0.71mm)
N/C
Do not connect
Supply, Vcc
Pad 8
Pad 1
0.042
(1.07mm)
0.008 Typ.
(0.20mm)
Top
View
Dimensional Tolerance:
+/-0.005 (+/-0.127mm)
Bottom
View
Ordering Information
-
010.0M
7
F
M
7
Type:
Precision
TCXO
VCTCXO
3.2x5mm
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
Features:
Temperature Range:
5 = 0 to 70° C
7 = -20 to 70° C
8 = -30 to 85° C
Frequency Stability:
E = ± 0.50 ppm
F = ± 1.00 ppm
G = ± 2.00 ppm
4 = TCXO, Clipped Sinewave, 2.5Vdc.
7 = TCXO, Clipped Sinewave, 3.3Vdc.
8 = VCTCXO, Clipped Sinewave, 2.5Vdc.
9 = VCTCXO, Clipped Sinewave, 3.3Vdc.
Example:
M77F-010.0M = 3.2x5mm, TCXO, Clipped Sinwave,
3.3Vdc, -20 to 70C, +/-1.00ppm, Output Frequency 10.0MHz
To order an M77F with an output frequency of:
6.4 MHz = M77F-006.4M
20 MHz = M77F-020.0M
38.88 MHz = M77F-038.88M
Bulletin
Standard Frequencies Available *
Tx193
Page
1 of 4
P05
6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz
13.5 MHz 19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz
* Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available.
Revision
Date
29 May 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Model Specifications
Model Number
M45E
TCXO
2.5Vdc
M75E
TCXO
3.3Vdc
M85E
VCTCXO
2.5Vdc
M95E
VCTCXO
3.3Vdc
Note
TCXO / VCTCXO
Supply Voltage
Features
Frequency Stability
Temperature Range
± 0.50ppm
0 to 70°C
1
Model Number
M47E
TCXO
2.5Vdc
M77E
TCXO
3.3Vdc
M87E
VCTCXO
2.5Vdc
M97E
VCTCXO
3.3Vdc
Note
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
0.50ppm, 1.00ppm or 2.00ppm
Temperature Ranges Available:
0 to 70°C
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 0.50ppm
-20 to 70°C
1
Note
1
Model Number
M48E
TCXO
2.5Vdc
M78E
TCXO
3.3Vdc
M88E
VCTCXO
2.5Vdc
M98E
VCTCXO
3.3Vdc
TCXO / VCTCXO
Supply Voltage
-20 to 70°C
-30 to 85°C
Frequency Stability
Temperature Range
± 0.50ppm
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
Model Number
M45F
TCXO
2.5Vdc
M75F
TCXO
3.3Vdc
M85F
VCTCXO
2.5Vdc
M95F
VCTCXO
3.3Vdc
Note
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 1.00ppm
0 to 70°C
1
Model Number
M47F
TCXO
2.5Vdc
M77F
TCXO
3.3Vdc
M87F
VCTCXO
2.5Vdc
M97F
VCTCXO
3.3Vdc
Note
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 1.00ppm
-20 to 70°C
1
Note
1
Test Circuit
N/C
DNC
Model Number
M48F
TCXO
2.5Vdc
M78F
TCXO
3.3Vdc
M88F
VCTCXO
2.5Vdc
M98F
VCTCXO
3.3Vdc
AC Coupling
Capacitor
TCXO / VCTCXO
Supply Voltage
Output
10 pF
Vcc
Supply
Voltage
7
6
5
8
1
Frequency Stability
Temperature Range
± 1.00ppm
-30 to 85°C
10Kohm
.01 uF
Bypass
4
3
2
N/C - TCXO
VC - VCTCXO
Model Number
M45G
TCXO
2.5Vdc
M75G
TCXO
3.3Vdc
M85G
VCTCXO
2.5Vdc
M95G
VCTCXO
3.3Vdc
Note
N/C
N/C
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 2.0ppm
0 to 70°C
1
Model Number
M47G
TCXO
2.5Vdc
M77G
TCXO
3.3Vdc
M87G
VCTCXO
2.5Vdc
M97G
VCTCXO
3.3Vdc
Note
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 2.0ppm
-20 to 70°C
1
Note
1
Model Number
M48G
TCXO
2.5Vdc
M78G
TCXO
3.3Vdc
M88G
VCTCXO
2.5Vdc
M98G
VCTCXO
3.3Vdc
TCXO / VCTCXO
Supply Voltage
Frequency Stability
Temperature Range
± 2.0ppm
-30 to 85°C
US Headquarters:
630-851-4722
Note:
1) Frequency stability vs. change in temperature. [± ±Fmax – Fmin)/2.Fo].
European Headquarters:
+353-61-472221
Bulletin
Page
Tx193
2 of 4
P05
Revision
Date
29 May 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Electrical Specifications for all Models
ABSOLUTE MAXIMUM RATINGS
PARAMETER
UNITS
MINIMUM NOMINAL MAXIMUM
UNITS
°C
NOTE
Storage Temperature
Supply Voltage
Input Voltage
-55
-0.5
-0.5
-
-
-
125
6.0
±Vcc)
±Vc)
Vdc
Vdc
Vcc+0.5
OPERATING SPECIFICATIONS
PARAMETER
MINIMUM
NOMINAL
MAXIMUM
UNITS
MHz
NOTE
Features
Frequency Range
6.4
-
40
1.00
1.0
4.6
0.025
0.025
0.4
1.00
2.625
3.465
2
Frequency Calibration
Aging First Year
±TCXO Models)
-1.00
-
ppm
1
-1.0
-
ppm
Total Aging for 10 years
-4.6
-
ppm
2.5V or 3.3V Operation
Clipped Sinewave Output Logic
Sub-Miniature 3.2x5.0mm SMT Package
Frequency Stabilities Available:
0.50ppm, 1.00ppm or 2.00ppm
Temperature Ranges Available:
0 to 70°C
-20 to 70°C
-30 to 85°C
Low Power <2mA
Low Jitter <1pS RMS
Supply Voltage Variation. ±Vcc± 5%)
Load Coefficient, ± 5pF
-0.025
-
ppm
-0.025
-
ppm
Static Temperature Hysteresis
Frequency shift after reflow soldering
-0.4
-
-
ppm
2
3
4
4
-1.00
ppm
Supply Voltage
2.5v Models
3.3V Models
±Vcc)
±Vcc)
±Icc)
2.375
2.500
3.300
-
Vdc
3.135
Vdc
Supply Current
-
-
-
-
-
-
-
mA
Jitter ±BW=10Hz to 20MHz)
Jitter ±BW=12kHz to 20MHz)
-
5
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-
1
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at >10KHz offset
-80
-110
-130
-145
-
-
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
-
-
INPUT CHARACTERISTICS for VOLTAGE CONTROL (Pad 1)
PARAMETER
MINIMUM
0.2
NOMINAL
MAXIMUM
UNITS
Notes
Control Voltage Range
2.5v Models
3.3v Models
±Vc)
±Vc)
1.2
1.5
-
2.2
2.5
-
Vdc
0.5
Test Circuit
Frequency Tuning
Linearity
± 10
ppm
%
N/C
DNC
± 5
-
-
Slope
Positive
AC Coupling
Capacitor
Output
10 pF
Vcc
Supply
Voltage
7
6
5
8
1
CLIPPED SINEWAVE OUTPUT CHARACTERISTICS (Pad 6)
10Kohm
PARAMETER
MINIMUM
NOMINAL
MAXIMUM
UNITS
Notes
.01 uF
Bypass
4
3
2
N/C - TCXO
VC - VCTCXO
Output Voltage
1.00
-
-
V pk-pk
Load
5
N/C
N/C
Output Load Resistance
Output Load Capacitance
-
-
10K
10
-
-
Ohms
pF
PACKAGE CHARACTERISTICS
Package
Ceramic Surface Mount Package.
ENVIRONMENTALS
Vibration:
Shock:
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant, lead free. See solder profile page 4.
Sollderability per Mil Std 883E Method 2003
Soldering:
Sollderability
Note:
1) TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of
operation.
2) Frequency change after reciprocal temperature ramped over the operating range.
Frequency measured before and after at 25ºC.
3) Within two hours after reflow.
4) For best in application performance, careful selection of an external power source is
critical. Select an external regulator that meets or exceeds to following specifications
regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage
noise, and low voltage noise density. Factory Test Conditions: Initial Accuracy ± 2mv,
Noise ±0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/sqrt Hz, Temperature
Coefficient < 5ppm/°C.
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Page
Tx193
3 of 4
P05
Revision
Date
5) Output is DC coupled
29 May 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Suggested Pad Layout
To
Output
0.028
(0.71mm)
External AC
Coupling
Capacitor
Typical Phase Noise
0.053
(1.35mm)
5
4
Model M77F-010.0MHz
Top
View
0.098
(2.49mm)
External
Bypass
1
8
Capacitor
0.01 uF
0.050
(1.27mm)
0.050
(1.27mm)
To
Ground
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
Time
120 S
Max.
10 S
60 S
Max.
Tape and Reel Specifications
360 Sec. Max.
Output Waveform
0
200 mV/Div
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Page
Tx193
4 of 4
Revision
Date
P05
29 May 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明