首页 |元器件品牌

XH733-200.0M [CONNOR-WINFIELD]

LVCMOS Output Clock Oscillator, 200MHz Nom, HERMETIC SEALED, CERAMIC, METAL, 4 PIN;
XH733-200.0M
型号： XH733-200.0M
厂家： CONNOR-WINFIELD CORPORATION    CONNOR-WINFIELD CORPORATION
描述：

LVCMOS Output Clock Oscillator, 200MHz Nom, HERMETIC SEALED, CERAMIC, METAL, 4 PIN

机械 振荡器
文件： 总4页 (文件大小：704K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
High Reliability  
Surface Mount LVCMOS  
Clock Oscillator Series  
Description:  
Features:  
The Connor-Winfield’s  
Model XH7xx - XH8xx - XH9xx Series  
Pure Spectrum™ Technology  
5.0 x7.0mm Surface Mount Package  
Supply Voltages: 2.5V or 3.3V  
LVCMOS Output Logic  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
XH7xx, XH8xx and XH9xx,  
High Reliability Series are  
5x7mm Surface Mount, Fixed  
Frequency Crystal Controlled  
Oscillators (XO). Designed  
for applications requiring tight  
frequency stability over a wide  
temperature range, operating  
at 2.5V or 3.3V supply voltage,  
the XH7xx, XH8xx and XH9xx  
series provides an LVCMOS  
output with enable / disable  
function. The surface mount  
package is designed for  
www.conwin.com  
Frequency Stabilities:  
+/-50ppm / +/-100ppm  
Temperature Ranges:  
-40 to 85°C / -55 to 125°C / -55 to 85°C  
Low Jitter <1pS RMS  
Sub-harmonics / Spurious: -70 dBc  
Minimal Frequency Perturbations:  
3ppm Max.  
Guaranteed Proper Frequency Startup.  
Screening Options are Available  
Gold Plated Terminations  
US Headquarters:  
630-851-4722  
1245  
XH723  
150.0  
MHZ  
European Headquarters:  
+353-61-472221  
high-density mounting and is  
optimum for mass production.  
Package Outline  
Suggested Pad Layout  
0.200  
(5.08mm)  
Vcc  
0.055  
(1.40mm)  
0.275  
(7.0mm)  
4
3
0.079  
(2.0mm)  
0.047  
(1.20mm)  
1245  
0.197  
(5.0mm)  
XH723  
0.165  
(4.2mm)  
150.0 MHZ  
Top View  
C–by  
0.200  
(5.08mm)  
1
2
0.102  
(2.60mm)  
Keep Out Area  
Ground  
0.070  
(1.8mm)  
0.060  
(1.50mm)  
Bypass capacitor, C–by, should be  
ceramic capacitor ≥ .01uf.  
Keep Out Area: Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane.  
Enable / Disable Function  
Pad Connections  
1: Enable / Disable (OE)  
2: Ground:  
3: Output  
Function: (Pad 1) Output  
High or Open:  
Low  
Enabled  
Disabled (High Impedance)  
4: Supply Voltage (Vcc)  
Ordering Information  
XH  
7
3
2
-150.0M  
Oscillator  
Type  
Temperature  
Range  
Output  
Frequency  
Frequency  
Tolerance  
Supply Voltage  
2 = 2.5 Vdc  
3 = 3.3 Vdc  
High Reliability  
Clock  
LVCMOS Series  
5x7 mm  
7 = -55 to 125°C  
8 = -40 to 85°C  
9 = -55 to 85°C  
Frequency  
Format  
-xxx.xM Min.*  
-xxx.xxxxxxM Max*  
2 = 50 ppm  
3 = 100 ppm  
*Amount of  
numbers after the  
decimal point.  
M = MHz  
Bulletin  
Sm127  
1 of 4  
Page  
Example Part Numbers:  
Revision  
Date  
07  
XH723-150.0M = 5x7 mm package, -55 to 125°C, 100 ppm, 3.3 Vdc, LVCMOS, Output Frequency 150.0 MHz  
XH922-44.736M = 5x7 mm package, -55 to 85°C, 50 ppm, , 3.3 Vdc, LVCMOS, Output Frequency 44.736 MHz  
16 Jan 2012  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Absolute Maximum Ratings  
Parameter  
Minimum  
-55  
Nominal  
Maximum  
125  
5.0  
Vcc+0.5  
Units  
°C  
Vdc  
Vdc  
Notes  
Notes  
Storage Temperature  
Supply Voltage (Vcc)  
Input Voltage  
-
-
-
-0.5  
-0.5  
Operating Specifications  
Parameter  
Center Frequency: (Fo)  
Minimum  
Nominal  
Maximum  
Units  
MHz  
10  
-
200  
Operating Temperature Range: (See Ordering Information)  
Model: XH7xx  
-55  
-40  
-55  
-
-
-
125  
85  
85  
°C  
°C  
°C  
Model: XH8xx  
Model: XH9xx  
Total Frequency Tolerance: (See Ordering Information)  
Model: XH72x, XH82x, XH92x  
-50.0  
-
-
50.0  
100.0  
ppm  
ppm  
1
1
Model: XH73x, XH83x, XH93x  
Supply Voltage: (Vcc) (See Ordering Information)  
Model: XH7x2, XH8x2, XH9x2  
Model: XH7x3, XH8x3, XH9x3  
Supply Current (Icc)  
-100.0  
2.375  
3.135  
2.5  
3.3  
2.625  
3.465  
Vdc  
Vdc  
5ꢀ  
5ꢀ  
10 to 39.999 MHz  
40 to 79.999 MHz  
80 to 89.999 MHz  
90 to 124.999 MHz  
125 to 164.999 MHz  
165 to 200 MHz  
-
-
-
-
-
-
-
-
-
-
-
-
10  
20  
35  
45  
65  
75  
mA  
mA  
mA  
mA  
mA  
mA  
Input Characteristics  
Parameter  
Minimum  
Nominal  
Maximum  
Units  
Vdc  
Vdc  
ms  
ns  
uA  
Notes  
Enable Voltage (High) (VIH)  
Disable Voltage (Low) (VIL)  
Enable Time  
70ꢀ Vcc  
-
-
30ꢀ Vcc  
2
2
2
-
-
-
-
-
-
-
-
Disable Time  
200  
10  
Output Disable Current (Standby Current) (Icc)  
Enable / Disable Function Pad 1  
High or Open  
Output  
Enabled  
Disabled  
Low  
LVCMOS Output Characteristics  
Parameter  
Minimum  
Nominal  
Maximum  
Units  
Notes  
Load  
-
15  
-
pF  
Output Voltage:  
High (VOH)  
Vcc-0.4  
Vcc-0.3  
0.3  
-
V
V
ꢀ
Low (VOL)  
-
45  
0.4  
55  
Duty Cycle at 50ꢀ of Vcc  
Rise / Fall Time: measured from 10ꢀ to 90ꢀ  
For Frequencies < 60 MHz  
For Frequencies > 60 MHz  
Start-Up Time:  
Sub-harmonics  
Spurious  
50  
-
-
-
-
-
-
2.0  
1.3  
-
-
-
-
3.0  
2.0  
2
-70  
-70  
3
ns  
ns  
ms  
dBc  
dbc  
ppm  
3
4
Frequency Perturbations over Temperature  
Bulletin  
Sm127  
2 of 4  
07  
Page  
Revision  
Date  
16 Jan 2013  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Jitter / Phase Noise Characteristics  
Parameter  
Jitter  
Minimum  
Nominal  
Maximum  
Units  
Notes  
Period Jitter  
Integrated Phase Jitter  
-
-
3
0.5  
5
1
ps RMS  
ps RMS  
SSB Phase Noise for XH723 Fo = 40.0 MHz  
@ 10 Hz offset  
-
-
-
-
-
-
-75  
-
-
-
-
-
-
dBC/Hz  
dBC/Hz  
dBC/Hz  
dBC/Hz  
dBC/Hz  
dBC/Hz  
@ 100 Hz offset  
@ 1 KHz offset  
@ 10 KHz offset  
@ 100 KHz offset  
-105  
-125  
-140  
-145  
-148  
@ 1 MHz offset  
Phase Noise Plot  
Typical Phase Noise Plot Model XH723-40.0M  
Package Characteristics  
Package  
Package Terminations  
Hermetically sealed ceramic package and metal cover  
Solder pads are Au plated, thickness 0.30 to 1.00 micron thick.  
Environmental Characteristics  
Vibration:  
Shock:  
Soldering Process;  
Screening  
Vibration per Mil Std 883E Method 2007.3 Test Condition A.  
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.  
Meets IPC/JEDEC J-STD-020C. See soldering profile on page 4.  
Other screening options are available.  
Notes:  
ꢀ 1.ꢀInclusiveꢀofꢀcalibrationꢀ@ꢀ25°C,ꢀfrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature,ꢀsupplyꢀvoltageꢀandꢀloadꢀvariations,ꢀshockꢀandꢀvibrationꢀandꢀ10ꢀꢀ  
ꢀ ꢀ yearsꢀaging.ꢀ  
ꢀ 2.ꢀWhenꢀtheꢀoscillatorꢀisꢀdisabledꢀtheꢀoutputꢀisꢀarꢀhighꢀimpedance..ꢀOutputsꢀisꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀ  
ꢀ 3.ꢀOscillatorꢀisꢀguaranteedꢀtoꢀstartꢀatꢀtheꢀspecifiedꢀfrequencyꢀ(Fo)ꢀunderꢀallꢀconditions.  
                                                                                         
E/Dꢀpadꢀ1.  
ꢀ 4.ꢀThisꢀpartꢀwillꢀnotꢀexhibitꢀfrequencyꢀjumpsꢀofꢀmoreꢀthatꢀ3ꢀppmꢀwhenꢀtestedꢀeveryꢀ2°Cꢀwithinꢀtheꢀoperatingꢀtemperatureꢀrangeꢀspecifiedꢀsupplyꢀꢀ  
ꢀ ꢀ voltageꢀandꢀload.  
Bulletin  
Sm127  
3 of 4  
07  
Page  
Revision  
Date  
16 Jan 2013  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Test Circuit  
OSCILLOSCOPE  
A
Vcc  
PROBE  
CL  
POWER  
SUPPLY  
3
4
V
OSC  
.01uf  
1
2
FREQ  
COUNTER  
INPUT for E/D  
Output Waveform  
90%  
50%  
10%  
Solder Profile  
260°C  
Temperature  
260°C  
220°C  
180°C  
150°C  
120°C  
0
10 s  
Up to 120 s  
60 to 90 s  
Typical  
Typical  
Meets IPC/JEDEC J-STD-020C  
Tape and Reel Dimensions  
Direction of Feed (Customer)  
Revision History  
Rev 00. Data sheet issued 08/15/08  
Rev 01 Updated tape and reel information 01/14/09  
Rev 02. Changed min frequency to 10 MHz. 5/6/09.  
Rev 03, Added pure spectrum logo. 10.20.09.  
Rev 04, Added models XH822 XH832 XH823 XH833. 11/25/09  
Rev 05, Removed RoHS and added screening options. 08/17/12  
Rev 06, Updated data sheet format and rise and fall times, added 40 MHz phase noise plot. 12/11/12.  
Rev 07, Corrected pad numbering on package outline , top view. GD 01/16/13.  
Bulletin  
Sm127  
4 of 4  
Page  
Revision  
Date  
07  
16 Jan 2013  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation  

相关型号：

XH733-40.0M

 LVCMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE

XH733-44.736M

 LVCMOS Output Clock Oscillator
CONNOR-WINFIE

XH733-FREQ

 LVCMOS Output Clock Oscillator, 10MHz Min, 200MHz Max, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, METAL, 4 PIN
CONNOR-WINFIE

XH742-150.0M

 LVCMOS Output Clock Oscillator,
CONNOR-WINFIE

XH743-150.0M

 LVCMOS Output Clock Oscillator,
CONNOR-WINFIE

XH7XX

 High Reliability Surface Mount LVCMOS Clock Oscillator Series
CONNOR-WINFIE

XH822-010.0M

 LVCMOS Output Clock Oscillator, 10MHz Nom, HERMETIC SEALED, CERAMIC, METAL, 4 PIN
CONNOR-WINFIE

XH822-10.0M

 LVCMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE

XH822-150.0M

 LVCMOS Output Clock Oscillator, 150MHz Nom, HERMETIC SEALED, CERAMIC, METAL, 4 PIN
CONNOR-WINFIE

XH822-200.0M

 LVCMOS Output Clock Oscillator, 200MHz Nom, HERMETIC SEALED, CERAMIC, METAL, 4 PIN
CONNOR-WINFIE

XH822-44.736M

 LVCMOS Output Clock Oscillator
CONNOR-WINFIE

XH822-FREQ

 LVCMOS Output Clock Oscillator, 10MHz Min, 200MHz Max, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, METAL, 4 PIN
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明