HEB-AW-RLA [COOPER]
HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses;
| 型号： | HEB-AW-RLA |
| 厂家： | 
COOPER BUSSMANN, INC. |
| 描述： | HEB breakaway and non-breakaway in-line fuse holders for UL 13/32â x 1-1/2â supplemental fuses |
| 文件： | 总6页 (文件大小：841K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BUSSMANN
Effective December 2015
Supersedes October 2015
Technical Data 2127
SERIES
HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2”
supplemental fuses
that fuses are sized at a minimum of 200% of
the RMS load current.
Use these part numbers to order insulating
boots for a non-breakaway HEB holder:
Description
Part number
2A0660
2A0661
Single conductor
Dual conductor
Catalog Symbol: HEB*
Description:
Boot reference:
The Bussmann® series of HEB submersible,
single-pole in-line fuse holders for UL 13/32” x
1-1/2” supplemental fuses. Available in
non-breakaway and breakaway versions
with an array of terminal options to meet
application needs. Breakaway versions come
with insulating boots to provide submersibility
per UL IP67.
0.8
(ø20)
4.1
(104)
1.3
(ø33)
4.7
(119)
Non-breakaway versions require ordering
optional insulating boots for submersibility.
Installation instructions:
Recommended fuses:
BAF, FNM, FNQ, KLM and KTK
Ratings:
Strip wire insulation equal to the depth of
the crimp or screw terminal.Torque screw
terminal to 35 Lb-In (3.9 N•m) or crimp terminal
twice, spacing crimps a distance of one-third
from each end (as shown below) using an
appropriate crimp tool and die. See page 6 for
recommended crimping tools.
Volts:
600V
Amps:
up to 30A limited by conductor size
Withstand: 200kA RMS Sym.
Crimp terminal twice
at locations 1/3 distance
from each end
Agency information:
UL® Recognized, Guide IZLT2, File E14853
CSA® Certified, Class 622501, File 47235
CE, RoHS compliant†
Coupling nut torque:
Strip wire insulation
to depth of terminal
10-20 Lb-In (1.1-2.2 N•m)
Related products:
Operating and storage temperature:
-40°F (-40°C) to 221°F (105°C)
Insulating boots:
Catalog
number Description
Data
sheet No.
Two-pole supplemental
HEX
HEZ
HEY
2126
2130
2126
Two insulating boots come standard with the
breakaway holder configurations. Insulating
boots are not included as standard with non-
breakaway holders.Two insulating boots must
be ordered separately, if required, for each non-
breakaway holder ordered. When insulating
boots are utilized, extra heat retention requires
in-line fuse holder
One-pole Class CC in-line
fuse holder
Two-pole Class CC in-line
fuse holder
One-pole in-line,
permanently installed
neutral
HET
2125
—
13/32” x 1-1/2” neutral
dummy link (not a fuse)
NNB
*
The Bussmann series HEB in-line fuse holders are the legacy
BussmannTRON™ HEB in-line fuse holders.
†
See terminal data tables for exceptions.
Technical Data 2127
Effective December 2015
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Non-breakaway catalog number system
To order:
Specify catalog symbol HEB and the loadside terminal code.Then select a lineside
terminal code that is available with the loadside terminal. Example: HEB-BB defines
a non-breakaway holder with a loadside copper crimp terminal for a single #6 or two
#10 wires with a lineside copper crimp terminal for a single #6 or two #10 wires.
HEB - A A
Agency
Information
Loadside terminal
Lineside terminal
Terminal type
Reference
length
A
Wire
range*
Wire
range*
Breakaway
equivalent
UL
CSA
Terminal type
#8-16;
(2) #12-16
#8-16;
(2) #12-16
X
X
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu setscrew
4.4 (112)
4.4 (112)
4.7 (119)
4.7 (119)
4.7 (119)
4.8 (122)
4.9 (124)
4.7 (119)
4.4 (112)
4.8 (122)
4.4 (112)
4.4 (112)
4.7 (119)
4.7 (119)
4.4 (112)
5 (127)
HEB-AW-RLC-A
A
B
C
D
J
#8-16;
(2) #12-16
#6;
(2) #10
X
X
X
X
HEB-AW-RLC-B
#8-16;
(2) #12-16
#4 str;
(2) #8
HEB-AW-RLC-C
#8-16;
(2) #12-16
#2 str;
(2) #6
X
X
—
#8-16;
(2) #12-16
X
—
—
—
—
—
—
X
#3-12
#2-12†
#1-2
HEB-AW-RLC-J
A
#8-16;
(2) #12-16
Cu dual
setscrew
X
HEB-AW-RYC
K
R
L
#8-16;
(2) #12-16
—
—
—
—
X
Al crimp
—
#8-16;
(2) #12-16
Al setscrew
Cu solid
#2-12
—
HEB-AW-RLA
#8-16;
(2) #12-16
—
W
Y
A
B
C
D
W
C
D
A
J
#8-16;
(2) #12-16
Al dual
setscrew
#2-12†
HEB-AW-RYA
#6;
(2) #10
#8-16;
(2) #12-16
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu solid
HEB-BW-RLC-A
#6;
(2) #10
#6;
(2) #10
X
X
HEB-BW-RLC-B
HEB
#6;
(2) #10
#4 str;
(2) #8
X
X
—
B
#6;
(2) #10
#2 str;
(2) #6
X
X
—
#6;
(2) #10
—
X
—
X
—
—
#4 str;
(2) #8
#4 str;
(2) #8
Cu crimp
Cu crimp
Cu crimp
Cu setscrew
—
C
D
Z
#2 str;
(2) #6
#2 str;
(2) #6
X
X
5 (127)
—
#8-16;
(2) #12-16
—
X
—
—
—
—
—
—
#18-20
#3-12
#3-12
#3-12
#3-12
#3-12
4.4 (112)
5 (127)
—
Cu
setscrew
#3-12
#2-12†
#2-12
—
HEB-JW-RLC-J
Cu
setscrew
Cu dual
setscrew
X
5.1 (129)
5 (127)
HEB-JW-RYC
K
L
Cu
setscrew
—
—
—
Al setscrew
Cu solid
—
—
—
J
Cu
setscrew
4.8 (122)
5.1 (129)
W
Y
Cu
setscrew
Al dual
setscrew
#2-12†
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Non-breakaway dimensions - in (mm):
A
9.125 (232)
Assembled length
Eaton.com/bussmannseries
2
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective December 2015
Non-breakaway catalog number system
HEB - A A
Agency
Information
Loadside terminal
Terminal type
Lineside terminal
Terminal type
Reference
length
A
Wire
range*
Wire
range*
Breakaway
equivalent
UL
CSA
Al
Al
—
—
#2-12
#2-12
5 (127)
HEB-LW-RLA
L
N
P
L
N
P
setscrew
setscrew
6 sol;
8 str
#6 sol;
#8 str
—
—
—
—
—
—
—
X
Al crimp
Al crimp
Al crimp
Al crimp
Al crimp
Cu solid
Al crimp
Al crimp
Al crimp
Al crimp
Al crimp
Cu solid
5.4 (137)
5.4 (137)
5.4 (137)
5.4 (137)
5.4 (137)
4.4 (112)
—
—
—
—
—
—
4 sol;
6 str
#4 sol;
#6 str
#2 sol;
#3-4 str
#2 sol;
#3-4 str
HEB
X
Q
R
Q
R
X
#1-2 str
1/0 str
—
#1-2 str
1/0 str
—
X
T
T
—
W
W
* Solid/stranded conductors unless otherwise noted.
Non-Breakaway terminal data
Conductor data
Conductor data
Terminal type
Terminal type
Al crimp
Cu crimp
#8-16
1
2
•
•
•
•
#8
#6
1
1
—
•
A
B
N
—
#10-16
•
#6
1
2
•
•
•
•
#6
#4
1
1
—
•
P
#10
•
—
#4
#8
1
2
—
•
•
C††
D††
Z
#3-4
#2
1
1
—
•
•
Q
—
•
#2
#6
1
2
—
•
•
•
#1-2
#1/0
1
1
1
—
—
•
•
•
•
R
T
L
#18-20
#3-12
1
1
•
•
•
•
Cu setscrew
J
Al setscrew
Cu dual
#2-12
setscrew
#2-12
—
2†
•
•
K
Al dual
setscrew
#2-12
2†
•
•
Y
Cu solid
—
—
—
W
†
Not dual wire rated. One wire per opening.
†† Fuse holder assemblies using this terminal are not RoHS compliant.
Eaton.com/bussmannseries
3
Technical Data 2127
Effective December 2015
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
To order:
Breakaway catalog number system
Specify catalog symbol HEB and the loadside terminal code plus the letter “W.”
Then select a lineside terminal code that is available with the loadside terminal.
Example: HEB-BW-RCL-B defines a breakaway holder with a loadside copper
crimp terminal for a single #6 or two #10 wires with a lineside copper crimp
terminal for a single #6 or two #10 wires.
HEB - A W - RYC
Agency
Information
Loadside terminal
Lineside terminal
Terminal type
Length
A
Non-
Wire
range*
Wire
range*
breakaway
UL
CSA
Terminal type
(reference) equivalent
#8-16;
(2) #12-16
#8-16;
(2) #12-16
RLC-A
RLC-B
RLC-C
RLC-J
RYC
X
X
Cu crimp
Cu crimp
5.8 (147)
5.9 (150)
6.2 (158)
6.2 (158)
6.3 (159)
6.2 (158)
6.3 (159)
5.8 (147)
5.9 (150)
6.3 (159)
6.2 (158)
6.3 (159)
6.2 (158)
6.3 (159)
6.2 (158)
6.2 (158)
6.3 (159)
HEB-AA
HEB-AB
HEB-AC
HEB-AJ
HEB-AK
HEB-AL
HEB-AY
HEB-BA
HEB-BB
—
#8-16;
(2) #12-16
#6;
(2) #10
X
X
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
Cu crimp
#8-16;
(2) #12-16
#4 str;
(2) #8
Cu crimp
Cu
#8-16;
(2) #12-16 setscrew
X
#3-12
#2-12†
#2-12
#2-12†
A
#8-16; Cu dual
X
(2) #12-16 setscrew
#8-16; Al
RLA
—
—
X
(2) #12-16 setscrew
#8-16; Al dual
(2) #12-16 setscrew
RYA
#6;
#8-16;
(2) #12-16
RLC-A
RLC-B
RYC
Cu crimp
(2) #10
#6;
6#;
(2) #10
X
Cu crimp
(2) #10
HEB
B
#6;
(2) #10
Cu dual
setscrew
X
#2-12†
#3-12
#2-12†
#3-12
#2-12†
#2-12
#3-12
#2-12†
Cu
setscrew
Cu
setscrew
RLC-J
RYC
X
#3-12
#3-12
#2-12†
#2-12†
#2-12
#2-12
#2-12
HEB-JJ
HEB-JK
—
J
Cu
setscrew
Cu dual
setscrew
X
Cu dual
setscrew
Cu
setscrew
RLC-J
RYC
X
K
Cu dual
setscrew
Cu dual
setscrew
X
—
Al
Al
RLA
—
—
—
HEB-LL
—
setscrew
setscrew
Al
Cu
setscrew
RLC-J
RYA
L
setscrew
Al
Al dual
setscrew
—
setscrew
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Dimensions - in (mm):
A
Breakaway
10.375 (263)
Assembled length
4
Eaton.com/bussmannseries
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective December 2015
Breakaway lineside terminal data
Breakaway loadside terminal data
Conductor data
Conductor data
Terminal type
Terminal type
Cu crimp
Cu crimp
#8-16
1
•
•
•
-RLC-A
-RLC-B
#8-16
1
2
•
•
•
•
#12-16
2
•
A
B
J
#10-16
#6
#10
1
2
•
•
•
•
#6
1
2
•
•
•
•
#10
#4
#8
1
2
—
•
•
•
-RLC-
C††
Cu setscrew
Cu setscrew
#3-12
#2-12
#2-12
#2-12
1
2†
1
•
•
•
•
•
•
•
•
-RLC-J
-RYC
-RLA
-RYA
#3-12
#2-12
#2-12
1
2†
1
•
•
•
•
•
•
Cu dual setscrew
Cu dual setscrew
Al setscrew
K
L
Al setscrew
Al dual setscrew
2†
†
Not dual wire rated. One wire per opening.
†† Fuse holder assemblies using this terminal are not RoHS compliant.
Eaton.com/bussmannseries
5
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective October 2015
Recommended crimping tools:
A wide variety of crimping tools can be used with the HEB fuse
holders. Some of the commercially available tools are listed in
the table below.This list is not intended to exclude the use of
other crimping tools that can provide similar crimps or indents.
HEB terminal
T & B P/N (Die)
WT-111M (Die C)
Sta-Kon® ERG4002 (Die C)
A
B
C
WT-115A (Die D)
TBM5 (Grey Die)
WT-115A (Die E)
TBM5 (Brown Die)
TBM8 (Brown Die)
WT-115A (Die F)
D
WT-111M (Die A)
Z
Sta-Kon ERG4002 (Die A)
TBM8 (Orange Die)
N, P, Q, R,T
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this
document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any
technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Eaton, Bussmann andTron are valuable
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
trademarks of Eaton in the US and other
countries.You are not permitted to use the
Eaton trademarks without prior written
consent of Eaton.
Eaton.com/bussmannseries
CSA is a registered trademark of the
Canadian Standards Group.
Sta-Kon is a registered trademark of
Thomas & Betts.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. 2127 - BU-SB15154
December 2015
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明