HPG [COOPER]

Panel-Mount Fuseholder;


型号：	HPG
厂家：	COOPER BUSSMANN, INC.
描述：	Panel-Mount Fuseholder
文件：	总1页 (文件大小：52K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Bu s s m a n n

Panel-Mount Fuseholder

HPG and HPD

Dim e ns iona l Da ta

With Fuse

2.81" Max.

(71.4mm)

HPG

HPG-EE

0.88"

(22.2mm)

1.125"

(28.6mm)

.250" ± .003"

(6.35 ± .08mm)

(Typ. 2)

HPD

Catalog Symbol: HPG and HPD

Panel-Mount

Agency Information: UL Recognized, Guide IZLT2,

File E14853

Flammability Rating: UL 94VO-Fuseholder Body

UL94HB-Knob

Ge ne ra l Inform a tion:

• Bayonet-type knob.

• For supplementary protection of transformers, relays,

ballasts and small motors.

• Mount in ⁄Ω™∑ (12.7mm) knock-outs with locknut.

• Do not put tension on line (ear) terminal.

Punched Mounting Hole

Ele c tric a l Ra tings

.880" .005"

Catalog

Symbol

Volts

(22.4mm .13mm)

Amps

Fuse Description

(3)

⁄‹Ω£™

⁄Ω™

HPG

HPG-EE

HPD

(3)

600

∑ x 1 ∑ (10.3 x 38.1mm)

.815" .005"

⁄‹Ω£™

ﬁΩ¡§

SC 0-15,

∑ ≈ 1 ∑ fuses.

(20.7mm .13mm)

(3)

⁄‹Ω£™

⁄Ω™

∑ x 1 ∑ (10.3 x 38.1mm)

20A max when used with quick connect terminals

Maximum panel thickness, mounting flange in front of panel

NOTE:

Assumes Pollution Degree 3 per UL 840:

Conductive pollution, or dry, nonconductive pollution that

becomes conductive due to condensation that is expected.

• HPG and HPG-EE has combination ⁄Ω¢∑ quick-connect/solder

terminals on both side (load) and rear (line) terminals.

• HPD has combination ⁄Ω¢∑ quick-connect/solder terminal on side

Maximum panel thickness not including any sealing gaskets.

(load) terminal only. Rear (line) terminal is / ∑ shorter than

System Voltage

600V

480

277

240

120

HPG. Rear terminal solder only.

Fuseholder

HPG

mm Inches mm Inches mm Inches mm Inches mm Inches

0.84 1/32” 1.73 1/16” 6.00 7/32” 6.55 1/4” 8.03 5/8”

HPD

0.84 1/32” 1.73 1/16” 6.00 7/32” 6.55 1/4” 8.03 5/8”

Thicker panels may be used if fuse holder load terminal is fully insulated, using a

UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment

is of Pollution Degree 1 or 2, or if panel is nonconductive.

Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary

conductivity caused by condensation may be expected.

Pollution Degree 1- No pollution or only dry, nonconductive pollution.

The pollution has no influence.

CE logo denotes compliance with European Union Low Voltage Directive

(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann

Application Engineering at 636-527-1270 for more information.

Maximum panel thickness, mounting flange behind the panel:

5.08mm/0.200” (flush to knob collar)

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Form No. HPG

Page 1 of 1

SB04184

Data Sheet: 2108

6-3-04

相关型号：