首页 |元器件品牌

PMA60F-12-TN [COSEL]

AC/DC CONVERTER 12V;
PMA60F-12-TN
型号： PMA60F-12-TN
厂家： COSEL CO., LTD.    COSEL CO., LTD.
描述：

AC/DC CONVERTER 12V
文件： 总11页 (文件大小：2008K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
AC-DC Power Supplies Medical Type  
Power  
Safety  
Approvals  
EMI  
OCP  
OVP  
Medical  
electric  
equipment  
World wide  
Inrush  
current  
limiting  
Remote  
ON/OFF  
Factor  
Correction  
PMA-series  
Feature  
For medical electric equipment  
CE marking  
Low Voltage Drective  
Internal dual fuses  
RoHS Directive  
Harmonic attenuator (Complies with IEC61000-3-2)  
Universal input (AC85 - 264V)  
Efficiency increased with synchronous rectification  
technology (PMA60F, PMA100F)  
Variety of option  
EMS Compliance : EN61204-3, EN61000-6-2  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5 (Common mode Level4, Differential mode Level2)  
Safety agency approvals  
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1  
EN61000-4-6  
EN61000-4-8  
EN61000-4-11  
EMI  
FCC-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B,  
VCCI-B  
5-year warranty (refer to Instruction Manual)  
July 01, 2020  
PMA-1  
Ordering information  
AC-DC Power Supplies Medical Type  
PM  
A
15  
F
-O -O  
5 6  
PMA15F  
1
2
3
4
1Series name  
2Single output  
3Output wattage  
4Universal input  
5Output voltage  
Example recommended EMI/EMC filter  
NAM-04-000  
R
*5  
6Optional  
T : Vertical terminal block  
T1  
:
Horizontal terminal block  
N: with Cover  
J1: VH(J.S.T.)connector type  
Low leakage current type : NAM series  
*
A higher current rating EMI/EMC filter  
may be recommended in view of the  
other devices that could be connected  
in parallel with the power supply.  
Specification is changed at  
option, refer to Instruction  
Manual.  
Horizontal terminal block  
Vertical terminal block Standard type  
with Cover  
(option : -T1)  
(option : -T)  
(option : -N)  
*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.  
MODEL  
MAX OUTPUT WATTAGE[W]  
DC OUTPUT  
PMA15F-3R3  
9.9  
3.3V 3A  
PMA15F-5  
15  
5V 3A  
PMA15F-12  
15.6  
12V 1.3A  
PMA15F-15  
15  
15V 1A  
PMA15F-24  
16.8  
24V 0.7A  
SPECIFICATIONS  
MODEL  
PMA15F-3R3  
PMA15F-5  
PMA15F-12  
PMA15F-15  
PMA15F-24  
VOLTAGE[V]  
AC85 - 264 1f(Refer to the Instruction Manual 1.1 and “Derating”) *3  
ACIN 100V 0.30typ (Io=100%)  
0.40typ (Io=100%)  
0.20typ (Io=100%)  
CURRENT[A]  
ACIN 200V 0.15typ (Io=100%)  
50 / 60 (47 - 440)  
ACIN 100V 66typ  
FREQUENCY[Hz]  
76typ  
79typ  
76typ  
79typ  
INPUT  
70typ  
74typ  
74typ  
78typ  
EFFICIENCY[%]  
ACIN 200V 67typ  
ACIN 100V 15typ (Io=100%) (At cold start)  
ACIN 200V 30typ (Io=100%) (At cold start)  
INRUSH CURRENT[A]  
LEAKAGE CURRENT[mA]  
VOLTAGE[V]  
0.05/0.10max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60601-1)  
3.3  
5
12  
15  
24  
CURRENT[A]  
3.0  
3.0  
1.3  
1.0  
0.7  
LINE REGULATION[mV]  
LOAD REGULATION[mV]  
20max  
40max  
80max  
140max  
120max  
160max  
50max  
60max  
20max  
20max  
40max  
80max  
140max  
120max  
160max  
50max  
60max  
20max  
48max  
100max  
120max  
160max  
150max  
180max  
120max  
150max  
48max  
60max  
120max  
120max  
160max  
150max  
180max  
150max  
180max  
60max  
96max  
150max  
120max  
160max  
150max  
180max  
240max  
290max  
96max  
0 to +50C  
RIPPLE[mVp-p]  
*1  
-10 - 0C  
0 to +50C  
-10 - 0C  
RIPPLE NOISE[mVp-p]  
*1  
OUTPUT  
0 to +50C  
-10 to +50C  
TEMPERATURE REGULATION[mV]  
*
2
DRIFT[mV]  
START-UP TIME[ms]  
HOLD-UP TIME[ms]  
200typ (ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage.  
20typ (ACIN 100V, Io=100%)  
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]  
2.85 to 3.60  
3.30 to 3.40  
4.50 to 5.50  
5.00 to 5.15  
10.00 to 13.20  
12.00 to 12.48  
13.20 to 18.00  
15.00 to 15.60  
19.20 to 27.00  
24.00 to 24.96  
OUTPUT VOLTAGE SETTING[V]  
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically  
PROTECTION  
CIRCUIT AND  
OTHERS  
OVERVOLTAGE PROTECTION[V] 4.00 to 5.25  
5.75 to 7.00  
15.00 to 18.00  
20.00 to 25.00  
30.00 to 37.00  
OPERATING INDICATION  
REMOTE ON/OFF  
LED (Green)  
Not provided  
INPUT-OUTPUT  
ISOLATION INPUT-FG  
OUTPUT-FG  
AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature)  
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000 feet) max *3  
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000 feet) max  
ENVIRONMENT  
2
VIBRATION  
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis  
2
IMPACT  
196.1m/s (20G), 11ms, once each X, Y and Z axis  
AGENCY APPROVALS  
CONDUCTED NOISE  
HARMONIC ATTENUATOR  
CASE SIZE/WEIGHT  
COOLING METHOD  
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1  
Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B  
SAFETY AND  
NOISE  
REGULATIONS  
*
6
Complies with IEC61000-3-2 (Class A) (Not built-in to active filter *4)  
31X78X103mm [1.22X3.07X4.06 inches] (WXHXD) / 230g max (with cover : 265g max)  
Convection  
OTHERS  
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM101).  
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.  
*3 Refer to “Derating”.  
*5 Please contact us about safety approvals for the model with option.  
*6 Please contact us about another class.  
*
*
*
Parallel operation with other model is not possible.  
Derating is required when operated with cover.  
A sound may occur from power supply at peak loading.  
*4 When two or more units are used, they may not comply with the harmonic attenuator. Please  
contact us for details.  
July 01, 2020  
PMA-2  
PMA15F  
Block diagram  
FUSE  
AC250V  
2.5A×2  
INRUSH  
CURRENT  
LIMIT  
RECTIFIER  
AND  
FILTER  
AC IN  
85 264V  
NOISE  
FILTER  
FG  
TRANSFORMER  
RECTIFIER  
AND  
CONTROL  
INVERTER  
DC OUT  
FILTER  
CURRENT  
SENSING  
Photocoupler  
Photocoupler  
CONTROL  
OVER VOLTAGE  
PROTECTION  
External view  
External size of option T and T1 is different from standard model and refer to 5 Option of instruction manual for detalis.  
18  
2.5  
[0.71] [0.1]  
Point B:C503  
CN2  
1.5  
103  
Voltage Adjust  
12.2  
[0.48]  
LED  
Cover name plate  
[4.06]  
Cover (Option)  
4
3
2
1
+V  
-V  
5
3
1
FG  
AC(L)  
AC(N)  
0.5  
40.5  
46  
CN1  
[1.81]  
[1.59]  
Point A:C102  
2-M3  
Mounting Hole  
Name plate  
2-M3  
Mounting Hole  
0.5  
75  
[2.95]  
8.5  
[0.33]  
Point A,Point B are thermometry points. Please refer to  
Instruction Manual 3.  
I/O Connector  
Mating Connector  
Terminal  
1123721-1  
1318912-1  
1123721-1  
1318912-1  
<PIN CONNECTION>  
CN2  
Chain  
Loose  
Chain  
Loose  
CN1 1-1123724-3 1-1123722-5  
CN2 1-1123723-4 1-1123722-4  
CN1  
Pin No.  
Tolerance : 1 [ 0.04]  
Input  
AC(N)  
Pin No.  
Output  
-V  
Weight  
:
230g max (with cover : 265g max)  
CEM-3 / 1.6mm [0.06inches]  
Electric galvanizing steel board  
PCB Material/thickness  
Chassis material  
:
1
2
3
4
5
1, 2  
:
(Mfr : Tyco Electronics AMP)  
Keep drawing current per pin bellow 5A of CN2.  
Dimensions in mm, [ ]=inches  
AC(L)  
FG  
I/O Connector is Mfr.Tyco Electronics AMP  
3, 4  
+V  
Option : -J1 : (J.S.T) connector type  
-T : Vertical terminal block type  
-T1 : Horizontal terminal block type  
Refer to Instruction Manual 5.  
Mounting torque  
: 0.6N m (6.3kgf cm) max  
- -  
Please connect safety ground to the unit in 2-M3 holes.  
July 01, 2020  
PMA-3  
Ordering information  
AC-DC Power Supplies Medical Type  
PM  
A
30  
F
-O -O  
5 6  
PMA30F  
1
2
3
4
1Series name  
2Single output  
3Output wattage  
4Universal input  
5Output voltage  
Example recommended EMI/EMC filter  
NAM-04-000  
R
*5  
6Optional  
T : Vertical terminal block  
T1  
:
Horizontal terminal block  
N: with Cover  
J1: VH(J.S.T.)connector type  
Low leakage current type : NAM series  
*
A higher current rating EMI/EMC filter  
may be recommended in view of the  
other devices that could be connected  
in parallel with the power supply.  
Specification is changed at  
option, refer to Instruction  
Manual.  
Horizontal terminal block  
Vertical terminal block Standard type  
with Cover  
(option : -T1)  
(option : -T)  
(option : -N)  
*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.  
MODEL  
MAX OUTPUT WATTAGE[W]  
DC OUTPUT  
PMA30F-3R3  
19.8  
3.3V 6A  
PMA30F-5  
30  
5V 6A  
PMA30F-12  
30  
12V 2.5A  
PMA30F-15  
30  
15V 2A  
PMA30F-24  
31.2  
24V 1.3A  
SPECIFICATIONS  
MODEL  
PMA30F-3R3  
PMA30F-5  
PMA30F-12  
PMA30F-15  
PMA30F-24  
VOLTAGE[V]  
AC85 - 264 1f(Refer to the Instruction Manual 1.1 and “Derating”) *3  
ACIN 100V 0.50typ (Io=100%)  
0.70typ (Io=100%)  
0.40typ (Io=100%)  
CURRENT[A]  
ACIN 200V 0.30typ (Io=100%)  
50 / 60 (47 - 440)  
ACIN 100V 67typ  
FREQUENCY[Hz]  
INPUT  
71typ  
74typ  
76typ  
78typ  
77typ  
80typ  
77typ  
80typ  
EFFICIENCY[%]  
ACIN 200V 69typ  
ACIN 100V 15typ (Io=100%) (At cold start)  
ACIN 200V 30typ (Io=100%) (At cold start)  
INRUSH CURRENT[A]  
LEAKAGE CURRENT[mA]  
VOLTAGE[V]  
0.05 / 0.10max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60601-1)  
3.3  
5
12  
15  
24  
CURRENT[A]  
6.0  
6.0  
2.5  
2.0  
1.3  
LINE REGULATION[mV]  
LOAD REGULATION[mV]  
20max  
40max  
20max  
40max  
80max  
140max  
120max  
160max  
50max  
60max  
20max  
48max  
100max  
120max  
160max  
150max  
180max  
120max  
150max  
48max  
60max  
120max  
120max  
160max  
150max  
180max  
150max  
180max  
60max  
96max  
150max  
120max  
160max  
150max  
180max  
240max  
290max  
96max  
0 to +50C 80max  
-10 - 0C 140max  
0 to +50C 120max  
-10 - 0C 160max  
0 to +50C 50max  
RIPPLE[mVp-p]  
*1  
RIPPLE NOISE[mVp-p]  
*1  
OUTPUT  
TEMPERATURE REGULATION[mV]  
-10 to +50  
C
60max  
20max  
*
2
DRIFT[mV]  
START-UP TIME[ms]  
HOLD-UP TIME[ms]  
200typ (ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage.  
20typ (ACIN 100V, Io=100%)  
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]  
2.85 to 3.60  
3.30 to 3.40  
4.50 to 5.50  
5.00 to 5.15  
10.00 to 13.20  
12.00 to 12.48  
13.20 to 18.00  
15.00 to 15.60  
19.20 to 27.00  
24.00 to 24.96  
OUTPUT VOLTAGE SETTING[V]  
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically  
PROTECTION  
CIRCUIT AND  
OTHERS  
OVERVOLTAGE PROTECTION[V] 4.00 to 5.25  
5.75 to 7.00  
15.00 to 18.00  
20.00 to 25.00  
30.00 to 37.00  
OPERATING INDICATION  
REMOTE ON/OFF  
LED (Green)  
Not provided  
INPUT-OUTPUT  
ISOLATION INPUT-FG  
OUTPUT-FG  
AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature)  
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) max *3  
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max  
ENVIRONMENT  
2
VIBRATION  
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis  
2
IMPACT  
196.1m/s (20G), 11ms, once each X, Y and Z axis  
AGENCY APPROVALS  
CONDUCTED NOISE  
HARMONIC ATTENUATOR  
CASE SIZE/WEIGHT  
COOLING METHOD  
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1  
Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B  
SAFETY AND  
NOISE  
REGULATIONS  
*
6
Complies with IEC61000-3-2 (Class A) (Not built-in to active filter *4)  
31X82X120mm [1.22X3.23X4.72 inches] (WXHXD) / 240g max (with cover : 280g max)  
Convection  
OTHERS  
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM101).  
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.  
*3 Refer to “Derating”.  
*5 Please contact us about safety approvals for the model with option.  
*6 Please contact us about another class.  
*
*
*
Parallel operation with other model is not possible.  
Derating is required when operated with cover.  
A sound may occur from power supply at peak loading.  
*4 When two or more units are used, they may not comply with the harmonic attenuator. Please  
contact us for details.  
July 01, 2020  
PMA-4  
PMA30F  
Block diagram  
FUSE  
AC250V  
3.15A×2  
INRUSH  
CURRENT  
LIMIT  
RECTIFIER  
AND  
FILTER  
AC IN  
85 264V  
NOISE  
FILTER  
FG  
TRANSFORMER  
RECTIFIER  
AND  
CONTROL  
INVERTER  
DC OUT  
FILTER  
CURRENT  
SENSING  
Photocoupler  
Photocoupler  
CONTROL  
OVER VOLTAGE  
PROTECTION  
External view  
External size of option T and T1 is different from standard model and refer to 5 Option of instruction manual for detalis.  
17  
2.5  
Point B:C503  
[0.67] [0.1]  
1.5  
120  
11.2  
LED  
Cover name plate  
Cover (Option)  
Voltage Adjust  
[4.72]  
[0.44]  
CN2  
4
3
2
1
+V  
-V  
5
3
1
FG  
AC(L)  
AC(N)  
2-M3  
Mounting Hole  
0.5  
[3.03]  
77  
4
CN1  
[0.16]  
Point A:C102  
Name plate  
2-M3  
Mounting Hole  
0.5  
88  
[3.46]  
11  
[0.43]  
Point A,Point B are thermometry points. Please refer to  
Instruction Manual 3.  
I/O Connector  
Mating Connector  
Terminal  
1123721-1  
1318912-1  
1123721-1  
1318912-1  
<PIN CONNECTION>  
CN2  
Chain  
Loose  
Chain  
Loose  
CN1 1-1123724-3 1-1123722-5  
CN2 1-1123723-4 1-1123722-4  
CN1  
Pin No.  
Tolerance : 1 [ 0.04]  
Weight  
PCB Material/thickness  
Chassis material Aluminum  
Keep drawing current per pin bellow 5A of CN2.  
Dimensions in mm, [ ]=inches  
:
240g max (with cover : 280g max)  
Input  
AC(N)  
Pin No.  
Output  
-V  
:
CEM-3 / 1.6mm [0.06inches]  
1
2
3
4
5
1, 2  
:
(Mfr : Tyco Electronics AMP)  
AC(L)  
FG  
I/O Connector is Mfr.Tyco Electronics AMP  
3, 4  
+V  
Option : -J1 : (J.S.T) connector type  
-T : Vertical terminal block type  
-T1 : Horizontal terminal block type  
Refer to Instruction Manual 5.  
Mounting torque  
: 0.49N m (5kgf cm) max  
- -  
Please connect safety ground to the unit in 2-M3 holes.  
July 01, 2020  
PMA-5  
Ordering information  
AC-DC Power Supplies Medical Type  
PM  
A
60  
F
-O -O  
5 6  
PMA60F  
1
2
3
4
1Series name  
2Single output  
3Output wattage  
4Universal input  
5Output voltage  
Example recommended EMI/EMC filter  
NAM-04-000  
R
*5  
6Optional  
T : Vertical terminal block  
T1  
:
Horizontal terminal block  
N: with Cover  
J1: VH(J.S.T.)connector type  
R: with Remote ON/OFF  
Low leakage current type : NAM series  
*
A higher current rating EMI/EMC filter  
may be recommended in view of the  
other devices that could be connected  
in parallel with the power supply.  
Specification is changed at  
option, refer to Instruction  
Manual.  
Horizontal terminal block  
Vertical terminal block Standard type  
with Cover  
(option : -T1)  
(option : -T)  
(option : -N)  
*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.  
MODEL  
MAX OUTPUT WATTAGE[W]  
DC OUTPUT  
PMA60F-3R3  
39.6  
3.3V 12A  
PMA60F-5  
60  
5V 12A  
PMA60F-12  
60  
12V 5A  
PMA60F-15  
60  
15V 4A  
PMA60F-24  
60  
24V 2.5A  
SPECIFICATIONS  
MODEL  
PMA60F-3R3  
PMA60F-5  
PMA60F-12  
PMA60F-15  
PMA60F-24  
VOLTAGE[V]  
AC85 - 264 1f(Refer to the Instruction Manual 1.1)  
ACIN 100V 0.7typ (Io=100%)  
ACIN 200V 0.4typ (Io=100%)  
50 / 60 (47 - 63)  
0.8typ (Io=100%)  
0.5typ (Io=100%)  
CURRENT[A]  
FREQUENCY[Hz]  
ACIN 100V 77typ  
80typ  
83typ  
80typ  
82typ  
81typ  
83typ  
81typ  
83typ  
EFFICIENCY[%]  
INPUT  
ACIN 200V 78typ  
ACIN 100V 0.98typ  
ACIN 200V 0.85typ  
POWER FACTOR  
(Io=100%)  
0.90typ  
ACIN 100V 15typ (Io=100%) (At cold start)  
ACIN 200V 30typ (Io=100%) (At cold start)  
INRUSH CURRENT[A]  
LEAKAGE CURRENT[mA]  
VOLTAGE[V]  
0.09 / 0.18max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60601-1)  
3.3  
5
12  
15  
24  
CURRENT[A]  
12.0  
12.0  
5.0  
4.0  
2.5  
LINE REGULATION[mV]  
LOAD REGULATION[mV]  
20max  
40max  
20max  
40max  
80max  
140max  
120max  
160max  
50max  
60max  
20max  
48max  
100max  
120max  
160max  
150max  
180max  
120max  
150max  
48max  
60max  
120max  
120max  
160max  
150max  
180max  
150max  
180max  
60max  
96max  
150max  
120max  
160max  
150max  
180max  
240max  
290max  
96max  
0 to +50C 80max  
-10 - 0C 140max  
0 to +50C 120max  
-10 - 0C 160max  
0 to +50C 50max  
RIPPLE[mVp-p]  
*1  
RIPPLE NOISE[mVp-p]  
*1  
OUTPUT  
TEMPERATURE REGULATION[mV]  
-10 to +50  
C
60max  
20max  
*
2
DRIFT[mV]  
START-UP TIME[ms]  
HOLD-UP TIME[ms]  
250typ (ACIN 100V, Io=100%)  
20typ (ACIN 100V, Io=100%)  
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]  
2.85 to 3.60  
3.30 to 3.40  
4.50 to 5.50  
5.00 to 5.15  
10.00 to 13.20  
12.00 to 12.48  
13.20 to 18.00  
15.00 to 15.60  
19.20 to 27.00  
24.00 to 24.96  
OUTPUT VOLTAGE SETTING[V]  
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically  
PROTECTION  
CIRCUIT AND  
OTHERS  
OVERVOLTAGE PROTECTION[V] 4.00 to 5.25  
5.75 to 7.00  
15.00 to 18.00  
20.00 to 25.00  
30.00 to 37.00  
OPERATING INDICATION  
REMOTE ON/OFF  
INPUT-OUTPUT RC  
LED (Green)  
Optional (Required external power source)  
AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature)  
.
*
*
3
3
ISOLATION INPUT-FG  
.
OUTPUT RC-FG  
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) max *4  
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max  
ENVIRONMENT  
2
VIBRATION  
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis  
2
IMPACT  
196.1m/s (20G), 11ms, once each X, Y and Z axis  
AGENCY APPROVALS  
CONDUCTED NOISE  
HARMONIC ATTENUATOR  
CASE SIZE/WEIGHT  
COOLING METHOD  
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1  
Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B  
Complies with IEC61000-3-2 *6  
32X82X135mm [1.26X3.23X5.31 inches] (WXHXD) / 350g max (with cover : 395g max)  
Convection  
SAFETY AND  
NOISE  
REGULATIONS  
OTHERS  
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM101).  
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.  
*3 Applicable when Remote ON/OFF (optional) is added. RC is insulated with input, output and FG.  
*4 Refer to “Derating”.  
*6 Please contact us about class C.  
*
*
*
Parallel operation with other model is not possible.  
Derating is required when operated with cover.  
A sound may occur from power supply at peak loading.  
*5 Please contact us about safety approvals for the model with option.  
July 01, 2020  
PMA-6  
PMA60F  
Block diagram  
FUSE  
250V3.15A×2  
INRUSH  
CURRENT  
LIMIT  
NOISE  
FILTER  
RECTIFIER  
AC IN 85 264V  
FG  
CURRENT  
SENSING  
OPTION  
RC  
EXTERNAL  
SOURCE  
E
BOOSTER  
INDUCTOR  
CURRENT  
SENSING  
RECTIFIER  
AND  
FILTER  
CONTROL  
INVERTER  
CONTROL  
OVER VOLTAGE  
PROTECTION  
INVERTER  
CONTROL  
RECTIFIER  
AND  
FILTER  
TRANSFORMER  
DC OUT  
External view  
External size of option T and T1 is different from standard model and refer to 5 Option of instruction manual for detalis.  
CN3  
Connector for Remote ON/OFF(option)  
17 2.5  
[0.67] [0.1]  
Point A:C118  
Point B:C505  
135  
[5.31]  
1.5  
11.2  
Voltage Adjust  
LED  
[0.44]  
Cover name plate  
Cover (Option)  
1 2  
CN2  
CN1  
6
5
4
3
2
1
+V  
-V  
5
3
1
FG  
AC(L)  
AC(N)  
2-M3  
Mounting Hole  
0.5  
94  
4
[3.7]  
[0.16]  
Connector type  
Name plate  
2-M3  
Mounting Hole  
CN3 Option (Mfr:J.S.T)  
PIN No.  
1
2
Contents  
RC(+)  
RC(-)  
Barrier strip type  
Model B2B-XH-A  
Mating Connector (Terminal)  
XHP-2  
0.5  
105.5  
[4.15]  
9
[0.35]  
Point A,Point B are thermometry points. Please refer to  
Instruction Manual 3.  
BXH-001T-P0.6  
<PIN CONNECTION>  
CN2  
I/O Connector  
Mating Connector  
Terminal  
1123721-1  
1318912-1  
1123721-1  
1318912-1  
or SXH-001T-P0.6  
Chain  
Loose  
Chain  
Loose  
CN1  
Pin No.  
CN1 1-1123724-3 1-1123722-5  
CN2 1-1123723-6 1-1123722-6  
Tolerance : 1 [ 0.04]  
Input  
AC(N)  
Pin No.  
Output  
-V  
Weight  
:
350g max (with cover : 395g max)  
CEM-3 / 1.6mm [0.06inches]  
Aluminum  
PCB Material/thickness  
Chassis material  
:
1
1 - 3  
:
2
3
4
5
(Mfr : Tyco Electronics AMP)  
Keep drawing current per pin bellow 5A of CN2.  
Dimensions in mm, [ ]=inches  
: 0.49N m (5kgf cm) max  
- -  
Please connect safety ground to the unit in 2-M3 holes.  
AC(L)  
FG  
I/O Connector is Mfr.Tyco Electronics AMP  
4 - 6  
+V  
Option : -J1 : (J.S.T) connector type  
-T : Vertical terminal block type  
-T1 : Horizontal terminal block type  
Refer to Instruction Manual 5.  
Mounting torque  
July 01, 2020  
PMA-7  
Ordering information  
AC-DC Power Supplies Medical Type  
PM  
A
100  
F
-O -O  
5 6  
PMA100F  
1
2
3
4
1Series name  
2Single output  
3Output wattage  
4Universal input  
5Output voltage  
Example recommended EMI/EMC filter  
NAM-06-000  
R
*5  
6Optional  
T : Vertical terminal block  
T1  
:
Horizontal terminal block  
N: with Cover  
J1: VH(J.S.T.)connector type  
R: with Remote ON/OFF  
Low leakage current type : NAM series  
*
A higher current rating EMI/EMC filter  
may be recommended in view of the  
other devices that could be connected  
in parallel with the power supply.  
Specification is changed at  
option, refer to Instruction  
Manual.  
Horizontal terminal block  
Vertical terminal block Standard type  
with Cover  
(option : -T1)  
(option : -T)  
(option : -N)  
*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.  
MODEL  
MAX OUTPUT WATTAGE[W]  
DC OUTPUT  
PMA100F-3R3  
66  
3.3V 20A  
PMA100F-5  
100  
5V 20A  
PMA100F-12  
102  
12V 8.5A  
PMA100F-24  
108  
24V 4.5A  
PMA100F-48  
100.8  
48V 2.1A  
SPECIFICATIONS  
MODEL  
PMA100F-3R3  
PMA100F-5  
PMA100F-12  
PMA100F-24  
PMA100F-48  
VOLTAGE[V]  
AC85 - 264 1f(Refer to the Instruction Manual 1.1)  
ACIN 100V 0.9typ (Io=100%)  
ACIN 200V 0.5typ (Io=100%)  
50 / 60 (47 - 63)  
1.3typ (Io=100%)  
0.7typ (Io=100%)  
CURRENT[A]  
FREQUENCY[Hz]  
ACIN 100V 77typ  
81typ  
83typ  
82typ  
83typ  
84typ  
86typ  
84typ  
86typ  
EFFICIENCY[%]  
INPUT  
ACIN 200V 78typ  
ACIN 100V 0.98typ  
ACIN 200V 0.85typ  
POWER FACTOR  
(Io=100%)  
0.90typ  
ACIN 100V 20typ (Io=100%) (At cold start)  
ACIN 200V 40typ (Io=100%) (At cold start)  
INRUSH CURRENT[A]  
LEAKAGE CURRENT[mA]  
VOLTAGE[V]  
0.09 / 0.18max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60601-1)  
3.3  
5
12  
24  
48  
CURRENT[A]  
20.0  
20.0  
8.5  
4.5  
2.1  
LINE REGULATION[mV]  
LOAD REGULATION[mV]  
20max  
40max  
20max  
40max  
80max  
140max  
120max  
160max  
50max  
60max  
20max  
48max  
100max  
120max  
160max  
150max  
180max  
120max  
150max  
48max  
96max  
150max  
120max  
160max  
150max  
180max  
240max  
290max  
96max  
192max  
240max  
150max  
200max  
250max  
300max  
480max  
600max  
192max  
0 to +50C 80max  
-10 - 0C 140max  
0 to +50C 120max  
-10 - 0C 160max  
0 to +50C 50max  
RIPPLE[mVp-p]  
*1  
RIPPLE NOISE[mVp-p]  
*1  
OUTPUT  
TEMPERATURE REGULATION[mV]  
-10 to +50  
C
60max  
20max  
*
2
DRIFT[mV]  
START-UP TIME[ms]  
HOLD-UP TIME[ms]  
250typ (ACIN 100V, Io=100%)  
20typ (ACIN 100V, Io=100%)  
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]  
2.85 to 3.60  
3.30 to 3.40  
4.50 to 5.50  
5.00 to 5.15  
10.00 to 13.20  
12.00 to 12.48  
19.20 to 27.00  
24.00 to 24.96  
39.00 to 53.00  
48.00 to 49.92  
OUTPUT VOLTAGE SETTING[V]  
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically  
PROTECTION  
CIRCUIT AND  
OTHERS  
OVERVOLTAGE PROTECTION[V] 4.00 to 5.25  
5.75 to 7.00  
15.00 to 18.00  
30.00 to 37.00  
58.00 to 65.00  
OPERATING INDICATION  
REMOTE ON/OFF  
INPUT-OUTPUT RC  
LED (Green)  
Optional (Required external power source)  
AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature)  
AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature)  
.
*
*
3
3
ISOLATION INPUT-FG  
.
OUTPUT RC-FG  
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) max *4  
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max  
ENVIRONMENT  
2
VIBRATION  
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis  
2
IMPACT  
196.1m/s (20G), 11ms, once each X, Y and Z axis  
AGENCY APPROVALS  
CONDUCTED NOISE  
HARMONIC ATTENUATOR  
CASE SIZE/WEIGHT  
COOLING METHOD  
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1  
Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B  
SAFETY AND  
NOISE  
REGULATIONS  
*6  
Complies with IEC61000-3-2  
34X93X168mm [1.34X3.66X6.61 inches] (WXHXD) / 560g max (with cover : 625g max)  
Convection  
OTHERS  
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM101).  
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.  
*3 Applicable when Remote ON/OFF (optional) is added. RC is insulated with input, output and FG.  
*4 Refer to “Derating”.  
*6 Please contact us about class C.  
*
*
*
Parallel operation with other model is not possible.  
Derating is required when operated with cover.  
A sound may occur from power supply at peak loading.  
*5 Please contact us about safety approvals for the model with option.  
July 01, 2020  
PMA-8  
PMA100F  
Block diagram  
FUSE  
250V3.15A×2  
INRUSH  
CURRENT  
LIMIT  
NOISE  
FILTER  
RECTIFIER  
AC IN 85 264V  
FG  
CURRENT  
SENSING  
OPTION  
RC  
EXTERNAL  
SOURCE  
E
BOOSTER  
INDUCTOR  
CURRENT  
SENSING  
RECTIFIER  
CONTROL  
INVERTER  
CONTROL  
AND  
FILTER  
OVER VOLTAGE  
PROTECTION  
INVERTER  
CONTROL  
RECTIFIER  
AND  
FILTER  
TRANSFORMER  
DC OUT  
External view  
External size of option T and T1 is different from standard model and refer to 5 Option of instruction manual for detalis.  
CN3  
17.5 2.5  
[0.69] [0.1]  
Connector for Remote ON/OFF(option)  
Point B:C505  
Point A:C118  
1.5  
11.7  
168  
LED  
[0.46]  
[6.61]  
Voltage Adjust  
Cover name plate  
1
2
Cover (Option)  
CN2  
CN1  
8
7
6
5
4
3
2
1
+V  
-V  
5
3
1
FG  
AC(L)  
AC(N)  
2-M3  
Mounting Hole  
0.5  
[3.07]  
58.5  
78  
[2.3]  
Connector type  
2-M3  
Mounting Hole  
Name plate  
CN3 Option (Mfr:J.S.T)  
PIN No.  
1
2
Contents  
RC(+)  
RC(-)  
Barrier strip type  
Model B2B-XH-A  
Mating Connector (Terminal)  
XHP-2  
0.5  
139.5  
[5.49]  
9
[0.35]  
Point A,Point B are thermometry points. Please refer to  
Instruction Manual 3.  
BXH-001T-P0.6  
I/O Connector  
Mating Connector  
Terminal  
1123721-1  
1318912-1  
1123721-1  
1318912-1  
<PIN CONNECTION>  
CN2  
or SXH-001T-P0.6  
Chain  
Loose  
Chain  
Loose  
CN1 1-1123724-3 1-1123722-5  
CN2 1-1123723-8 1-1123722-8  
CN1  
Pin No.  
Tolerance : 1 [ 0.04]  
Input  
AC(N)  
Pin No.  
Output  
-V  
Weight  
:
560g max (with cover : 625g max)  
CEM-3 / 1.6mm [0.06inches]  
Aluminum  
PCB Material/thickness  
Chassis material  
:
1
2
3
4
5
1 - 4  
(Mfr : Tyco Electronics AMP)  
:
Keep drawing current per pin bellow 5A of CN2.  
Dimensions in mm, [ ]=inches  
: 0.49N m (5kgf cm) max  
- -  
Please connect safety ground to the unit in 2-M3 holes.  
AC(L)  
FG  
I/O Connector is Mfr.Tyco Electronics AMP  
5 - 8  
+V  
Option : -J1 : (J.S.T) connector type  
-T : Vertical terminal block type  
-T1 : Horizontal terminal block type  
Refer to Instruction Manual 5.  
Mounting torque  
July 01, 2020  
PMA-9  
PMA-series  
Assembling and Installation Method  
Installation method  
Chassis of  
MA series  
Do not insert a screw more than 6mm from the outside of a power supply to keep  
¡
Chassis of  
customer system  
enough insulation distance between the screw and internal components.  
A
B
C
Mounting Screw  
6mm max  
Normal position  
If you use two or more power supplies side by side, please keep a sufficient distance between them to allow enough air ventilation.  
¡
¡
Ambient temperature around each power supply should not exceed the temperature range shown in “Derating”.  
Derating  
PMA15F,PMA30F Input voltage Derating Curve  
¿
[%]  
100  
80  
8590  
[AC V]  
Ambient temperature Derating Curve (Reference value)  
100  
¿
2
80  
1
60  
1Convection  
2
Forced air (0.5m3 / min)  
40  
20  
0
-10  
0
10  
20  
30 [20] 40 [30] 50 [40] 60 [50] 70 [60] 80 [70]  
40 [30] 50 [40] 60 [50] 70 [60]  
[25] [35] [45] [55]  
A
B
C
35  
45  
55  
65  
Inside  
is with case cover  
[ ]  
Ambient temperature [C]  
In the hatched area, the specification of Ripple, Ripple Noise is different from other area.  
The ambient temperature should be measured 5 to 10 cm away from the power supply so that it won’t be influenced by the heat from the  
power supply. Please consult us for more details.  
¡
¡
Make sure the temperature at point A and point B is less than the temperatures shown in Instruction Manual 3.  
¡
Instruction Manual  
◆ It is neccessary to read the “Instruction Manual” and “Before using our product” before you use our product.  
Instruction Manual  
https://en.cosel.co.jp/product/powersupply/PMA/  
Before using our product https://en.cosel.co.jp/technical/caution/index.html  
PMA  
NOTICE  
July 01, 2020  
PMA-10  
PMA-series  
Basic Characteristics Data  
Series/Parallel  
Switching  
frequency  
[kHz]  
Input  
current  
[A]  
Inrush  
current  
protection  
PCB/Pattern  
operation availability *2  
Model  
PMA15F  
PMA30F  
PMA60F  
PMA100F  
Circuit method  
Flyback converter  
Flyback converter  
Single Double  
Series  
Parallel  
sided sided operation operation  
Material  
*1  
100  
100  
0.4  
0.7  
0.8  
1.3  
Thermistor  
Thermistor  
Thermistor  
Thermistor  
CEM-3  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
No  
CEM-3  
CEM-3  
CEM-3  
Active filter  
Forward converter  
Active filter  
60 - 550  
120  
60 - 550  
120  
Forward converter  
*1 The value of input current is at ACIN 100V and rated load.  
*2 Refer to Instruction Manual 2.  
July 01, 2020  
PMA-11  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明