CLS6B-DXS-XHHJJKKLLMMNN2 [CREE]
Cree® PLCC6 3 in 1 SMD LED;
| 型号： | CLS6B-DXS-XHHJJKKLLMMNN2 |
| 厂家： | 
CREE, INC |
| 描述： | Cree® PLCC6 3 in 1 SMD LED |
| 文件： | 总12页 (文件大小：1052K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRODUCT FAMILY DATA SHEET
®
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
• Size (mm): 4.7 x 1.5 X1.3
These SMD LEDs are packaged in an
industry standard PLCC6 package.
These high performance tricolor SMT
LEDs are designed to work in a wide
range of applications. A wide viewing
angle and high brightness make these
LEDs suitable for indoor signage
applications.
• Full-Color Video Screen
• Decorative lighting
• Amusement
• Dominant Wavelength (nm):
Red:(619-624)
Green:(520-535)
Blue:(462.5-475)
• Luminous Intensity (mcd)
Red (560 - 1120)
Green (1120 - 2240)
Blue (252 - 505)
• Moisture Sensitivity Level: 3
• Lead-Free
• RoHS Compliant
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Absolute Maximum Rating
Items
Symbol
Unit
R
30
200
5
G
20
B
Note 1
Forward Current
IF
20
100
5
mA
mA
Note 2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
100
5
V
Power Dissipation
78
76
76
mW
°C
Operation Temperature
T
-40 ~ +85
-40 ~ +100
110
opr
Storage Temperature
Tstg
TJ
°C
Junction Temperature
110
360
200
510
280
110
450
300
690
420
°C
Junction/ambient 1 chip on
Junction/solder point 1 chip on
Junction/ambient 3 chip on
Junction/solder point 3 chip on
RTHJA
RTHJS
RTHJA
RTHJS
475
°C/W
°C/W
°C/W
°C/W
330
675
470
Note: 1.Single-color light.
2.Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Values
G
Characteristics
Condition
IF = 20 mA
IF = 20 mA
Symbol
λDOM
Unit
R
B
Dominant Wavelength
619~624
520~535
462.5~475
nm
nm
Spectral bandwidth at 50% IREL max
Δ λ
16
30
22
VF(avg)
VF(max)
IV(min)
IV(avg)
IR
2.1
2.6
560
770
10
3.1
3.8
3.1
3.8
252
350
10
V
V
Forward Voltage
IF = 20 mA
1120
1500
10
mcd
mcd
μA
Luminous Intensity
IF = 20 mA
Reverse Current (max)
VR = 5 V
Note: Continuous reverse voltage can cause LED damage.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
INTENSITY BIN LIMIT (IF = 20mA)
Green
Blue
Red
Bin Code
Min.(mcd) Max.(mcd)
Bin Code Min.(mcd) Max.(mcd)
Bin Code
Min.(mcd) Max.(mcd)
P
vw
Q
1120
1260
1400
1600
1800
1400
1600
1800
2020
2240
de
G
252
280
318
355
403
318
355
403
450
505
K
np
M
560
635
710
805
900
710
805
fg
H
900
xy
R
qr
N
1010
1120
hj
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 20mA)
Blue
Green
Red
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B23
B4
462.5
465
467.5
470
G7
G23
G8
520
522.5
525
525
527.5
530
RB
619
624
B45
B5
467.5
470
472.5
475
G45
G9
527.5
530
532.5
535
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength (nm)
Pack-
age
Kit Number
Color
Color
Bin
Min.
(nm)
Max.
(nm)
Min.
Max.
Color Bin
Red
560
1120
252
1120
2240
505
RB
G7
619
520
RB
G9
B5
RB
624
535
475
624
Reel
Reel
Reel
Reel
Reel
Reel
CLS6B-FKW-CKNPRdehjBB792353 Green
Blue
B23
RB
462.5
619
Red
CLS6B-FKW-CK1P1de1BB7C23R3 Green
Blue
Any 1 intensity bin from K(560)-N(1120)
Any 1 intensity bin from P(1120)-R(2240)
Any 1 intensity bin from de(252)-hj(505)
Any 1 hue bin from G7(520)-G9(535)
Any 1 hue bin from B23(462.5)-B5(475)
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin
code will be orderable in certain quantities. For example, any 1 intensity bin from P - R means only 1 intensity bin
(P or vw or Q or xy or R) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only
1 color bin (G7 or G23 or G8 or G45 or G9)will be shipped by Cree.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document
3. Please refer to the “Cree LED Lamp Soldering & Handling” document
#1
for reliability test conditions.
#2
for information about how to use this LED
product safely.
#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf
#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
GRAPHS
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
GRAPHS
° C
° C
° C
° C
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
CAUTIONS
1. Cleaning
•
•
When necessary, cleaning should occur only with isopropyl alcohol (IPA) at room temperature (25ºC) for a duration
of no more than one minute. Dry at room temperature for 15 minutes before use.
The influence of ultrasonic cleaning on the SMD LED depends on factors such as ultrasonic power and the way the
SMD LEDs are mounted. Ultrasonic cleaning should be pre-qualified to ensure this will not cause damage to the SMD
LEDs.
2. Moisture-Proof Packing
•
•
To prevent moisture absorption into SMD LEDs during the transportation and storage, the LEDs are packed in a mois-
ture-barrier bag. Desiccants and a humidity indicator are packed together with the LEDs as secondary protection.
A humidity-indicator card inside the packing indicates the humidity level.
3. Storage
•
The shelf life of LEDs stored in the original sealed bag at <40ºC and <90%RH is 12 months. Baking is required if
the shelf life has expired.
•
•
Before openning the packaging, check for air leaks in the bag.
After the bag is opened, the SMD LEDs must be stored at < 30ºC and < 60% RH. Under these conditions, SMD LEDs
must be used (subject to reflow) within 168 hours. If the LEDs are not within 168 hours after removal from the bag,
baking is required.
•
•
To bake, place the SMD LEDs in an oven at 80ºC ±5ºC and relative humidity ≤10% RH for 24 hours.
Take the material out of the packaging bag before baking. Do not open the oven door frequently during the baking
process.
4. Soldering
a. Manual Soldering with a Soldering Iron
•
Use of a soldering iron of less than 25 watts is recommended. The iron temperature must be kept below 315ºC and
soldering time no more than 2 seconds.
•
•
•
The epoxy resin of an SMD LED should not contact the tip of the soldering iron.
No mechanical stress should be exerted on the resin portion of an SMD LED during soldering.
Handling of an SMD LED should be done only when the package has been cooled down to below 40ºC or less. This
is to prevent SMD LED failures due to thermal-mechanical stress during handling.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
b. Reflow Soldering
Temperature (top surface of the SMD LED) profile:
℃
℃
℃
℃
℃
℃
℃
Notes:
•
SMD LEDs should not be modified after soldering. If modification cannot be avoided, the modifications must be pre-
qualified to avoid damaging the SMD LEDs.
•
•
•
In case of 2 times reflow process, 2nd reflow process must be performed as soon as possible after the 1st reflow.
No stress should be exerted on the package during soldering.
The PCB should not be wrapped after soldering; allow the PCB board and SMD LED to cool naturally.
Refer to "http://www.cree.com/led-components/media/documents/sh-HB.pdf" for soldering & handling details.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
NOTES
•
•
The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are
required to handle with care. Never touch the resin surface of SMD products.
To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick
up the SMD products during the process of SMT production. If handling is necessary, take special care when picking
up these products. The following method is necessary:
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
9
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
MECHANICAL DIMENSIONS
All dimensions are in mm.
Tolerance of measurement of the dimension is ±0.1
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
10
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following man-
ner:
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
11
Cree PLCC6 3 in 1 SMD LED
CLS6B-FKW
PACKAGING
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 3000 pcs per reel.
A
Avvooiid
d
ctt
ctt
MMeettaall
MMeettaall
A
Avvooiid
d
C
Coonntta
a
c
C
Coonntta
a
c
C
Co
o
b
b
a
alltt
F
Frree
e
e
C
Co
o
b
b
a
alltt
F
Frere
e
e
Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明