MCE4WT-A2-0000-000M02 [CREE]
LED COOL WHITE 430LM 7X7 SMD;
| 型号： | MCE4WT-A2-0000-000M02 |
| 厂家： | 
CREE, INC |
| 描述： | LED COOL WHITE 430LM 7X7 SMD 光电 |
| 文件： | 总14页 (文件大小：1446K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® MC-E LED
MC-E White
MC-E Color
MC-E Dynamic White
PꢀꢁDuCꢂ DEsCꢀꢃPꢂꢃꢁꢄ
FEAꢂuꢀEs
ꢂAbLE ꢁF CꢁꢄꢂEꢄꢂs
Thꢀ XLamp® MC-e LeD is a family of
lighting-class, multi-chip LeDs that
proꢁidꢀs high lumꢀn output in a small
packagꢀ. Comparꢀd to discrꢀtꢀ LeDs,
XLamp MC-e LeDs rꢀducꢀ thꢀ distancꢀ
bꢀtwꢀꢀn LeD diꢀ, crꢀating a small optical
sourcꢀ for ꢀxcꢀllꢀnt optical control and
efficient color mixing. XLamp MC-E LEDs
can rꢀducꢀ LeD systꢀm complꢀxity by
rꢀducing thꢀ numbꢀr of componꢀnts
rꢀquirꢀd.
•
Available in white (2600 K –
10,000 K CCT), EasyWhite®,
Dynamic White, or color (RGBW)
ANSI-compatiblꢀ nꢀutral & warm
whitꢀ chromaticity bins
Charactꢀristics
Complꢀtꢀ Packagꢀ...........................2
Per LED Die (White)..........................2
Per LED Die (Color)...........................2
Flux Charactꢀristics
•
•
•
Indiꢁidually addrꢀssablꢀ LeDs
MC-E Dynamic White LEDs have
two cool-white (6500 K) and two
warm-white (2700 K) LED die
MC-E EasyWhite LEDs available in
2- and 4-stꢀp bins, up to 85 CRI
Maximum drive current: 700 mA per
LeD diꢀ
White .................................................3
EasyWhite® .......................................4
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution
White .................................................5
Color..................................................5
Relative Flux Output vs Junction
•
•
•
Tꢀmpꢀraturꢀ...........................................6
elꢀctrical Charactꢀristics.......................7
Rꢀlatiꢁꢀ Intꢀnsity ꢁs. Currꢀnt.................7
Typical Spatial Radiation Pattꢀrn..........8
Reflow Soldering Characteristics..........9
Notꢀs ....................................................10
Mꢀchanical Dimꢀnsions ......................12
Tapꢀ and Rꢀꢀl.......................................13
Packaging.................................................
14 ..............................................................
Crꢀꢀ
XLamp
LeDs
bring
high
pꢀrformancꢀ and quality of light to a widꢀ
rangꢀ of lighting applications, including
color-changing lighting, portablꢀ and
pꢀrsonal lighting, outdoor lighting, indoor
dirꢀctional lighting, and ꢀntꢀrtainmꢀnt
lighting.
Reflow solderable – JEDEC
J-STD-020
•
•
•
elꢀctrically nꢀutral thꢀrmal path
RoHS and ReACh compliant
UL® rꢀcognizꢀd componꢀnt
(E349212)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® mC-E LED
CꢅAꢀACꢂEꢀꢃsꢂꢃCs - CꢁMPLEꢂE PACkAgE
Thꢀ following tablꢀ lists thꢀ product charactꢀristics for thꢀ XLamp MC-e LeD packagꢀ.
Characteriꢆticꢆ
unit
Minimꢇm
ꢂypical
Maximꢇm
Thꢀrmal Rꢀsistancꢀ, junction to soldꢀr point - whitꢀ
Thꢀrmal Rꢀsistancꢀ, junction to soldꢀr point - color
Viewing Angle (FWHM) - white
°C/W
°C/W
dꢀgrꢀꢀs
dꢀgrꢀꢀs
v
3
4
110
115
Viewing Angle (FWHM) - color
ESD Withstand Voltage (HBM per Mil-Std-883D)
LED Junction Temperature
8000
150
°C
CꢅAꢀACꢂEꢀꢃsꢂꢃCs - PEꢀ LED DꢃE (WꢅꢃꢂE, EAsꢈWꢅꢃꢂE®, DꢈꢄAMꢃC WꢅꢃꢂE)
The following table lists the product characteristics of each individual LED die within the XLamp MC-E White LED package.
Characteriꢆticꢆ
unit
Minimꢇm
ꢂypical
Maximꢇm
Temperature Coefficient of Voltage
DC Forward Currꢀnt
mv/°C
mA
-4
700
5
Rꢀꢁꢀrsꢀ voltagꢀ
v
Forward Voltage (@ 350 mA)
Forward Voltage (@ 700 mA)
v
v
3.1
3.4
3.9
CꢅAꢀACꢂEꢀꢃsꢂꢃCs - PEꢀ LED DꢃE (CꢁLꢁꢀ)
Thꢀ following tablꢀ lists thꢀ product charactꢀristics for ꢀach LeD diꢀ within thꢀ XLamp MC-e Color LeD packagꢀ.
Characteriꢆticꢆ
unit
ꢀed
green
blꢇe
White
Temperature Coefficient of Voltage
DC Forward Currꢀnt
mv/°C
mA
Typical
Maximum
Maximum
Typical
-2
700
5
-4
700
5
-4
700
5
-4
700
5
Rꢀꢁꢀrsꢀ voltagꢀ
v
2.1
2.5
2.3
3.4
3.9
3.7
3.2
3.9
3.5
3.1
3.9
3.5
Forward Voltage (@ 350 mA)
Forward Voltage (@ 700 mA)
v
v
Maximum
Typical
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® mC-E LED
FLuX CꢅAꢀACꢂEꢀꢃsꢂꢃCs - WꢅꢃꢂE, DꢈꢄAMꢃC WꢅꢃꢂE, CꢁLꢁꢀ (ꢂJ = 25 °C)
Thꢀ following tablꢀ proꢁidꢀs sꢀꢁꢀral basꢀ ordꢀr codꢀs for XLamp MC-e LeDs. It is important to notꢀ that thꢀ basꢀ ordꢀr codꢀs listꢀd hꢀrꢀ
arꢀ a subsꢀt of thꢀ total aꢁailablꢀ ordꢀr codꢀs for thꢀ product family. For morꢀ ordꢀr codꢀs, as wꢀll as a complꢀtꢀ dꢀscription of thꢀ ordꢀr-
code nomenclature, please consult the XLamp MC-E LED Binning and Labeling document.
Minimꢇm Lꢇminoꢇꢆ Flꢇx
CCꢂ / Dominant Wavelenꢉth ꢀanꢉe
@ 350 mA*
Part
Color
ꢁrder Code
Minimꢇm
Maximꢇm
groꢇp
Flꢇx (lm)
370
430
320
370
240
280
320
100
70
K
M
J
MCE4WT-A2-0000-000K01
MCE4WT-A2-0000-000M01
MCE4WT-A2-0000-000JE4
MCE4WT-A2-0000-000KE4
MCE4WT-A2-0000-000GE7
MCE4WT-A2-0000-000HE7
MCE4WT-A2-0000-000JE7
Cool White
5000 K
10,000 K
Neutral White
3700 K
2600 K
5000 K
3700 K
White
K
G
H
J
Warm White
2 cool-whitꢀ diꢀ
2 warm-whitꢀ diꢀ
2 cool-whitꢀ diꢀ
2 warm-whitꢀ diꢀ
Rꢀd
6500 K
2700 K
6000 K
2700 K
K
G
K
G
MCEDWT-A1-0000-0000A1001
MCEDWT-A1-0000-0000A1002
Dynamic White
100
70
620 nm
520 nm
450 nm
5700 K
620 nm
520 nm
450 nm
3700 K
630 nm
535 nm
465 nm
7000 K
630 nm
535 nm
465 nm
4300 K
30.6
67.2
8.2
Green
A5
A4
MCe4CT-A2-0000-00A5AAAA1
Blue
Cool White
Rꢀd
100
30.6
67.2
8.2
Color
Green
MCE4CT-A2-0000-00A4AAAB1
Blue
Neutral White
80
Notꢀs:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI
measurements and ± 1 nm on dominant wavelength measurements. See the Measurements section (page 10).
Typical CRI for cool white and neutral white (3700 K - 10,000 K CCT) is 75.
•
•
*
Typical CRI for warm white (2600 K - 3700 K CCT) is 80.
Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. The flux and chromaticity
of XLamp MC-E White LED are measured with all LEDs lit simultaneously. The flux and color of each LED in XLamp MC-E Dynamic
White and MC-E Color LEDs are measured individually.
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® mC-E LED
FLuX CꢅAꢀACꢂEꢀꢃsꢂꢃCs - EAsꢈWꢅꢃꢂE® MC-E LEDs (ꢂJ = 25 °C)
The following table provides order codes for XLamp MC-E EasyWhite LEDs. For a complete description of the order-code nomenclature,
please consult the XLamp MC-E LED Binning and Labeling document.
Minimꢇm Lꢇminoꢇꢆ Flꢇx
@ 350 mA, 25 ° C*
2-step
4-step
CCꢂ
ꢀanꢉe
Color
Chromaticity
ꢀeꢉion
Chromaticity
ꢀeꢉion
groꢇp
Flꢇx (lm)
ꢁrder Code
ꢁrder Code
K
J
370
320
320
280
320
280
320
280
370
320
320
280
320
280
320
280
280
240
280
240
MCEEZW-A1-0000-0000K040H
MCEEZW-A1-0000-0000J040H
MCEEZW-A1-0000-0000J035H
MCEEZW-A1-0000-0000H035H
MCEEZW-A1-0000-0000J030H
MCEEZW-A1-0000-0000H030H
MCEEZW-A1-0000-0000J027H
MCEEZW-A1-0000-0000H027H
MCEEZW-H1-0000-0000K040H
MCEEZW-H1-0000-0000J040H
MCEEZW-H1-0000-0000J035H
MCEEZW-H1-0000-0000H035H
MCEEZW-H1-0000-0000J030H
MCEEZW-H1-0000-0000H030H
MCEEZW-H1-0000-0000J027H
MCEEZW-H1-0000-0000H027H
MCEEZW-P1-0000-0000H030H
MCEEZW-P1-0000-0000G030H
MCEEZW-P1-0000-0000H027H
MCEEZW-P1-0000-0000G027H
MCEEZW-A1-0000-0000K040F
MCEEZW-A1-0000-0000J040F
MCEEZW-A1-0000-0000J035F
MCEEZW-A1-0000-0000H035F
MCEEZW-A1-0000-0000J030F
MCEEZW-A1-0000-0000H030F
MCEEZW-A1-0000-0000J027F
MCEEZW-A1-0000-0000H027F
MCEEZW-H1-0000-0000K040F
MCEEZW-H1-0000-0000J040F
MCEEZW-H1-0000-0000J035F
MCEEZW-H1-0000-0000H035F
MCEEZW-H1-0000-0000J030F
MCEEZW-H1-0000-0000H030F
MCEEZW-H1-0000-0000J027F
MCEEZW-H1-0000-0000H027F
MCEEZW-P1-0000-0000H030F
MCEEZW-P1-0000-0000G030F
MCEEZW-P1-0000-0000H027F
MCEEZW-P1-0000-0000G027F
4000 K
3500 K
3000 K
2700 K
4000 K
3500 K
3000 K
2700 K
3000 K
2700 K
40H
35H
30H
27H
40H
35H
30H
27H
30H
27H
40F
35F
30F
27F
40F
35F
30F
27F
30F
27F
J
H
J
Standard CRI
EasyWhite
H
J
H
K
J
J
80-CRI
Minimum
EasyWhite
H
J
H
J
H
H
G
H
G
85-CRI
Minimum
EasyWhite
Notꢀs:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 10).
•
*
For Standard CRI parts, the typical CRI is 80 for 4000 and 3500 K CCT parts and typical CRI is 82 for 3000 and 2700 K CCT.
Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA and with all LEDs lit
simultanꢀously.
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® mC-E LED
ꢀELAꢂꢃꢊE sPECꢂꢀAL PꢁWEꢀ Dꢃsꢂꢀꢃbuꢂꢃꢁꢄ (ꢃF = 350 mA PEꢀ LED) - WꢅꢃꢂE
The following graph represents typical spectral output of the XLamp MC-E White LED with all four LEDs on simultaneously.
100
80
5000 K - 10,000 K
CCT
60
40
20
0
3700 K - 5000 K
CCT
2600 K - 3700 K
CCT
380
430
480
530
580
630
680
730
780
Wavelength (nm)
ꢀELAꢂꢃꢊE sPECꢂꢀAL PꢁWEꢀ Dꢃsꢂꢀꢃbuꢂꢃꢁꢄ (ꢃF = 350 mA PEꢀ LED) - CꢁLꢁꢀ
Thꢀ following graph rꢀprꢀsꢀnts typical spꢀctral output of thꢀ XLamp MC-e Color LeD with all four LeDs on simultanꢀously.
100
80
60
RGBW (6000 K)
RGBW (4000 K)
40
20
0
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® mC-E LED
ꢀELAꢂꢃꢊE sPECꢂꢀAL PꢁWEꢀ Dꢃsꢂꢀꢃbuꢂꢃꢁꢄ (ꢃF = 350 mA PEꢀ LED) - CꢁLꢁꢀ (CꢁꢄꢂꢃꢄuED)
Thꢀ following graph rꢀprꢀsꢀnts typical spꢀctral output of thꢀ XLamp MC-e Color LeD with ꢀach LeD on indꢀpꢀndꢀntly.
100
80
60
40
20
0
Red
Green
Blue
White (6000 K)
White (4000 K)
380
430
480
530
580
630
680
730
780
Wavelength (nm)
ꢀELAꢂꢃꢊE FLuX ꢁuꢂPuꢂ ꢊs JuꢄCꢂꢃꢁꢄ ꢂEMPEꢀAꢂuꢀE (ꢃF = 350 mA)
Thꢀ following graph rꢀprꢀsꢀnts typical pꢀrformancꢀ of ꢀach LeD diꢀ in thꢀ XLamp MC-e LeD.
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
White
Red
Green
Blue
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® mC-E LED
ELECꢂꢀꢃCAL CꢅAꢀACꢂEꢀꢃsꢂꢃCs (ꢂJ = 25 ˚C)
Thꢀ following graph rꢀprꢀsꢀnts typical pꢀrformancꢀ of ꢀach LeD diꢀ in thꢀ XLamp MC-e LeD.
700
600
500
400
300
200
100
0
White, Blue
Red
Green
1.5
2.0
2.5
3.0
3.5
4.0
Forward Voltage (V)
ꢀELAꢂꢃꢊE ꢃꢄꢂEꢄsꢃꢂꢈ ꢊs. CuꢀꢀEꢄꢂ (ꢂJ = 25 ˚C)
Thꢀ following graph rꢀprꢀsꢀnts typical pꢀrformancꢀ of ꢀach LeD diꢀ in thꢀ XLamp MC-e LeD.
200
180
160
140
120
100
80
White, Blue
Red
Green
60
40
20
0
0
100
200
300
400
500
600
700
Forward Current (mA)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® mC-E LED
ꢂꢈPꢃCAL sPAꢂꢃAL ꢀADꢃAꢂꢃꢁꢄ PAꢂꢂEꢀꢄ
Thꢀ following graph rꢀprꢀsꢀnts typical output of thꢀ XLamp MC-e LeD with all four LeDs on simultanꢀously.
100
80
60
40
20
0
White
Color
-90
-60
-30
0
30
60
90
Angle (º)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® mC-E LED
ꢀEFLꢁW sꢁLDEꢀꢃꢄg CꢅAꢀACꢂEꢀꢃsꢂꢃCs
In testing, Cree has found XLamp MC-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and thꢀrꢀforꢀ it is thꢀ lamp or luminairꢀ manufacturꢀr’s rꢀsponsibility to dꢀtꢀrminꢀ applicablꢀ soldꢀring rꢀquirꢀmꢀnts.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Featꢇre
Lead-Free solder
Aꢁꢀragꢀ Ramp-Up Ratꢀ (Tsmax to Tp)
1.2 °C/second
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin
Prꢀhꢀat: Tꢀmpꢀraturꢀ Max (Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
120 °C
)
170 °C
65-150 sꢀconds
217 °C
)
Timꢀ Maintainꢀd Aboꢁꢀ: Tꢀmpꢀraturꢀ (TL)
Timꢀ Maintainꢀd Aboꢁꢀ: Timꢀ (tL)
45-90 sꢀconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Ratꢀ
20-40 sꢀconds
1 - 6 °C/sꢀcond
4 minutꢀs max.
Time 25 °C to Peak Temperature
Notꢀ: All tꢀmpꢀraturꢀs rꢀfꢀr to topsidꢀ of thꢀ packagꢀ, mꢀasurꢀd on thꢀ packagꢀ body surfacꢀ.
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® mC-E LED
ꢄꢁꢂEs
Meaꢆꢇrementꢆ
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solꢀly rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Pre‑Release Qualification Testing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability Oꢁꢀrꢁiꢀw for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lꢇmen Maintenance
Crꢀꢀ now usꢀs standardizꢀd IeS LM-80-08 and TM-21-11 mꢀthods for collꢀcting long-tꢀrm data and ꢀxtrapolating LeD lumꢀn maintꢀnancꢀ.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 rꢀsults documꢀnt.
Moiꢆtꢇre senꢆitivity
Cree recommends keeping XLamp MC-E LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MC-E LEDs should be handled and stored as MSL 4 per JEDEC J-STD-033, meaning they have limited
ꢀxposurꢀ timꢀ bꢀforꢀ damagꢀ to thꢀ LeD may occur during thꢀ
Maximꢇm Percent ꢀelative ꢅꢇmidity
ꢂemperatꢇre
soldering operation. The table on the right specifies the maximum
ꢀxposurꢀ timꢀ in days dꢀpꢀnding on tꢀmpꢀraturꢀ and humidity
conditions. LEDs with exposure time longer than the specified
maximums must bꢀ bakꢀd according to thꢀ baking conditions
listꢀd bꢀlow.
30%
9
40%
5
50%
4
60%
3
70%
1
80%
1
90%
1
30 ºC
25 ºC
20 ºC
12
17
7
5
4
2
1
1
9
7
6
2
2
1
baꢋinꢉ Conditionꢆ
It is not nꢀcꢀssary to bakꢀ all XLamp MC-e LeDs. Only thꢀ LeDs that mꢀꢀt all of thꢀ following critꢀria must bꢀ bakꢀd:
•
•
•
LEDs that have been removed from the original MBP.
LeDs that haꢁꢀ bꢀꢀn ꢀxposꢀd to a humid ꢀnꢁironmꢀnt longꢀr than listꢀd in thꢀ Moisturꢀ Sꢀnsitiꢁity sꢀction aboꢁꢀ.
LeDs that haꢁꢀ not bꢀꢀn soldꢀrꢀd.
LEDs should be baked at 70 ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from the MBP before baking. Do
not bake parts at temperatures higher than 70 ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity
sꢀction aboꢁꢀ.
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® mC-E LED
ꢄꢁꢂEs - CꢁꢄꢂꢃꢄuED
storaꢉe Conditionꢆ
XLamp MC-E LEDs that have been removed from the original MBP but not soldered yet should be stored in a room or cabinet that will
maintain an atmosphere of 25 ± 5 ºC and no greater than 10% RH. For LEDs stored in these conditions, storage time does not add to
exposure time as defined in the above Moisture Sensitivity section.
ꢀoꢅs Compliance
Thꢀ lꢀꢁꢀls of RoHS rꢀstrictꢀd matꢀrials in this product arꢀ bꢀlow thꢀ maximum concꢀntration ꢁaluꢀs (also rꢀfꢀrrꢀd to as thꢀ thrꢀshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
ecology sꢀction of thꢀ Crꢀꢀ wꢀbsitꢀ.
ꢀEACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has
publishꢀd noticꢀ of thꢀir intꢀnt to frꢀquꢀntly rꢀꢁisꢀ thꢀ SvHC listing for thꢀ forꢀsꢀꢀablꢀ futurꢀ, plꢀasꢀ contact a Crꢀꢀ rꢀprꢀsꢀntatiꢁꢀ to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon rꢀquꢀst.
uL® ꢀecoꢉnized Component
This product mꢀꢀts thꢀ rꢀquirꢀmꢀnts to bꢀ considꢀrꢀd a UL Rꢀcognizꢀd Componꢀnt with Lꢀꢁꢀl 1 ꢀnclosurꢀ considꢀration. Thꢀ LeD
package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750.
ꢊiꢆion Adviꢆory
WARNING. Do not look at ab exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
rꢀfꢀr to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® mC-E LED
MECꢅAꢄꢃCAL DꢃMEꢄsꢃꢁꢄs
All measurements are ±.1 mm unless otherwise indicated.
4.48±.20
.80
TYP.
1.45
+.13
-.03
.75
.05±.05
1
2
3
4
Color
D1: Rꢀd
D2: Green
D3: Blue
D4: White
HEATSINK
D2 D3
D1 D4
A
+
.0
.2
2.60
9.0
7.50
Dynamic White
D1: Cool White
D2: Warm White
D3: Cool White
D4: Warm White
R3.18
8
7
6
5
1.50 BSC
PITCH
.25
5.40
7.00
.10
ꢂop ꢊiew
side ꢊiew
bottom ꢊiew
D1
D2
D3
D4
8
7
6
5
1
NEGATIVE (-) 1
NEGATIVE (-) 2
NEGATIVE (-) 3
NEGATIVE (-) 4
POSITIVE (+) 1
D5
D6
D7
D8
2
3
4
POSITIVE (+) 2
POSITIVE (+) 3
POSITIVE (+) 4
5.60
1.16
1
1.16
1.00 TYP.
2.00
4
3.85
3.85
1.24
7.7 10.02
2.84 7.70 10.02
2.75
2.75
1.30
1.50 BSC
PITCH
1.5
ꢀecommended stencil Pattern
(shaded Area iꢆ ꢁpen)
ꢀecommended PCb solder Pad
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® mC-E LED
ꢂAPE AꢄD ꢀEEL
All Crꢀꢀ carriꢀr tapꢀs conform to eIA-481D, Automatꢀd Componꢀnt Handling Systꢀms Standard.
excꢀpt as notꢀd, all mꢀasurꢀmꢀnts in mm.
4.0±.1
1.5±.1
12.0±.1
5.5±.1
1.75±.10
Cathode Side
+
.0
.3
16.0
Anode Side
(denoted by chamfer)
User Feed Direction
END
START
Loaded Pockets
(200 Lamps)
Trailer
160mm (min) of
empty pockets
sealed with tape
(13 pockets min.)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(34 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® mC-E LED
PACkAgꢃꢄg
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Dessicant
(inside bag)
Label with Cree Order Code,
Quantity, Reel ID, PO #
Humidity Indicator Card
(inside bag)
Label with Cree Bin
Code, Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2008-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc UL® and the UR logo are registered trademarks of UL LLC.
14
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明