XHGAWT-00-0000-00000PVE7 [CREE]
XLamp XH-G LED;型号: | XHGAWT-00-0000-00000PVE7 |
厂家: | CREE, INC |
描述: | XLamp XH-G LED |
文件: | 总12页 (文件大小:1424K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® XH-G LED
PRODUCT DESCRIPTION
FEATURES
TAbLE OF CONTENTS
Unlikꢀ common plastic packagꢀs,
XLamp XH LeDs usꢀ a cꢀramic packagꢀ
to dꢀliꢁꢀr thꢀ uniquꢀ combination of high
pꢀrformancꢀ and rꢀliability not aꢁailablꢀ
ꢀlsꢀwhꢀrꢀ in mid-powꢀr LeDs. Thꢀ
cꢀramic-basꢀd XH LeDs arꢀ dꢀsignꢀd to
dꢀliꢁꢀr thꢀ long L70 lifꢀtimꢀs of Crꢀꢀ’s
othꢀr high-powꢀr LeDs, such as XP or
XT LeDs, as wꢀll as industry-lꢀading LeD
efficacy levels.
•
•
Package size: 3.0 X 3.0 mm
Available in white (2200 K and
2600 K - 8300 K), 70-minimum CRI
cool white, 80-minimum CRI white
and 85- and 90-minimum CRI warm
whitꢀ
Charactꢀristics.......................................2
Flux Charactꢀristics ...............................3
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution ....4
Relative Flux vs. Junction
Tꢀmpꢀraturꢀ...........................................4
elꢀctrical Charactꢀristics.......................5
Rꢀlatiꢁꢀ Flux ꢁs. Currꢀnt ........................5
Typical Spatial Distribution....................6
Thꢀrmal Dꢀsign......................................6
Reflow Soldering Characteristics..........7
Notꢀs ......................................................8
Mꢀchanical Dimꢀnsions ......................10
Tapꢀ and Rꢀꢀl.......................................11
Packaging.............................................12
•
•
•
350 mA maximum drive current
viꢀwing anglꢀ: 130°
Reflow solderable - JEDEC
J-STD-020C compatible
Unlimited floor life at
•
Optimized for fluorescent replacement
lighting applications, such as troffꢀrs
and panel lights, where high efficacy,
long lifꢀtimꢀ and smooth appꢀarancꢀ
arꢀ critical, thꢀ XH LeDs allow lighting
manufacturꢀrs to offꢀr products that
mꢀꢀt thꢀ lifꢀtimꢀ ꢀxpꢀctations of LeD
tꢀchnology.
≤ 30 °C/85% RH
•
•
RoHS and ReACh compliant
UL® rꢀcognizꢀd componꢀnt
(E349212)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® XH-G LED
CHARACTERISTICS
Characteristics
Unit
Minimum
Typical
Maximum
Thꢀrmal rꢀsistancꢀ, junction to soldꢀr point
Viewing angle (FWHM)
°C/W
20
dꢀgrꢀꢀs
130
-1.2
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
DC forward currꢀnt
mV/°C
v
mA
v
8000
350
-5
Rꢀꢁꢀrsꢀ ꢁoltagꢀ
Forward voltage (@ 65 mA, 25 °C)
LeD junction tꢀmpꢀraturꢀ
v
2.9
3.4
°C
150
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XH-G LED
FLUX CHARACTERISTICS (TJ = 25 °C)
The following table provides several base order codes for XLamp XH-G LEDs. It is important to note that the base order codes listed here
arꢀ a subsꢀt of thꢀ total aꢁailablꢀ ordꢀr codꢀs for thꢀ product family. For morꢀ ordꢀr codꢀs, as wꢀll as a complꢀtꢀ dꢀscription of thꢀ ordꢀr-
codꢀ nomꢀnclaturꢀ, plꢀasꢀ consult thꢀ XLamp XH Family LeD Binning and Labꢀling documꢀnt.
Calculated
Minimum Luminous Flux
Minimum
Luminous Flux
(lm)*
CCT Range
@ 65 mA
Color
Order Code
Min.
Max.
Group
J3
Flux (lm)
26.8
26.8
26.8
23.5
26.8
26.8
26.8
26.8
26.8
26.8
23.5
18.1
18.1
300 mA
101
Cool White
5000 K
3700 K
2600 K
2000 K
5000 K
3700 K
2600 K
5000 K
3700 K
2600 K
2000 K
2600 K
2600 K
8300 K
5000 K
3700 K
2400 K
8300 K
5000 K
3700 K
8300 K
5000 K
3700 K
2400 K
3200 K
3200 K
XHGAWT-00-0000-00000LX51
XHGAWT-00-0000-00000LXE5
XHGAWT-00-0000-00000LXE7
XHGAWT-00-0000-00000LWEA
XHGAWT-00-0000-00000BX51
XHGAWT-00-0000-00000BXE5
XHGAWT-00-0000-00000BXE7
XHGAWT-00-0000-00000HX51
XHGAWT-00-0000-00000HXE5
XHGAWT-00-0000-00000HXE7
XHGAWT-00-0000-00000HWEA
XHGAWT-00-0000-00000PVE7
XHGAWT-00-0000-00000UVE7
Neutral White
J3
101
J3
101
Warm White
J2
88.6
101
J3
70-CRI White
J3
101
J3
101
J3
101
J3
101
80-CRI White
J3
101
J2
88.6
68.2
68.2
85-CRI White
90-CRI White
H0
H0
Notꢀs:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 8).
Typical CRI for Neutral White, 3700 K - 5000 K CCT is 75.
Typical CRI for Warm White, 2000 K - 3700 K CCT is 80.
•
•
•
•
•
•
*
Minimum CRI for 70-CRI Minimum Cool White is 70.
Minimum CRI for 80-CRI Minimum White is 80.
Minimum CRI for 85-CRI Minimum White is 85.
Minimum CRI for 90-CRI Minimum White is 90.
Calculated flux values at 300 mA are for reference only.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XH-G LED
RELATIvE SPECTRAL POwER DISTRIbUTION
100
80
60
40
20
0
Cool White
Warm White
380
430
480
530
580
630
680
730
780
Wavelength (nm)
RELATIvE FLUX vS. JUNCTION TEMPERATURE (IF = 65 mA)
100
80
60
40
20
0
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XH-G LED
ELECTRICAL CHARACTERISTICS (TJ = 25 °C)
350
325
300
275
250
225
200
175
150
125
100
75
50
25
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
Forward Voltage (V)
RELATIvE FLUX vS. CURRENT (TJ = 25 °C)
450
400
350
300
250
200
150
100
50
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XH-G LED
TꢀPICAL SPATIAL DISTRIbUTION
100
90
80
70
60
50
40
30
20
10
0
-90
-70
-50
-30
-10
Angle (º)
10
30
50
70
90
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to bꢀ dꢀsignꢀd in a mannꢀr that minimizꢀs thꢀ thꢀrmal rꢀsistancꢀ from thꢀ soldꢀr point to ambiꢀnt in ordꢀr to optimizꢀ lamp lifꢀ
and optical charactꢀristics.
400
350
300
250
200
150
Rj-a = 25°C/W
100
Rj-a = 30°C/W
Rj-a = 35°C/W
50
Rj-a = 40°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XH-G LED
REFLOw SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XH-G LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Profile Feature
Lead-Free Solder
Aꢁꢀragꢀ Ramp-Up Ratꢀ (Tsmax to Tp)
1.2 °C/second
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin
Prꢀhꢀat: Tꢀmpꢀraturꢀ Max (Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
120 °C
)
170 °C
65-150 seconds
217 °C
)
Timꢀ Maintainꢀd Aboꢁꢀ: Tꢀmpꢀraturꢀ (TL)
Timꢀ Maintainꢀd Aboꢁꢀ: Timꢀ (tL)
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Ratꢀ
20-40 sꢀconds
1 - 6 °C/second
4 minutꢀs max.
Time 25 °C to Peak Temperature
Notꢀ: All tꢀmpꢀraturꢀs rꢀfꢀr to topsidꢀ of thꢀ packagꢀ, mꢀasurꢀd on thꢀ packagꢀ body surfacꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XH-G LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability Oꢁꢀrꢁiꢀw for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Plꢀasꢀ rꢀad thꢀ Long-Tꢀrm Lumꢀn Maintꢀnancꢀ application notꢀ for morꢀ dꢀtails on Crꢀꢀ’s lumꢀn maintꢀnancꢀ tꢀsting and forꢀcasting.
Plꢀasꢀ rꢀad thꢀ Thꢀrmal Managꢀmꢀnt application notꢀ for dꢀtails on how thꢀrmal dꢀsign, ambiꢀnt tꢀmpꢀraturꢀ, and driꢁꢀ currꢀnt affꢀct
thꢀ LeD junction tꢀmpꢀraturꢀ.
Moisture Sensitiꢁity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopꢀnꢀd MBPs that contain XLamp LeDs do not nꢀꢀd spꢀcial storagꢀ for moisturꢀ sꢀnsitiꢁity.
Once the MBP is opened, XLamp XH-G LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
Thꢀ lꢀꢁꢀls of RoHS rꢀstrictꢀd matꢀrials in this product arꢀ bꢀlow thꢀ maximum concꢀntration ꢁaluꢀs (also rꢀfꢀrrꢀd to as thꢀ thrꢀshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documꢀntation sꢀctions of www.crꢀꢀ.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has publishꢀd noticꢀ of thꢀir intꢀnt to frꢀquꢀntly rꢀꢁisꢀ thꢀ SvHC listing for thꢀ forꢀsꢀꢀablꢀ futurꢀ, plꢀasꢀ contact a Crꢀꢀ rꢀprꢀsꢀntatiꢁꢀ to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon rꢀquꢀst.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XH-G LED
NOTES - CONTINUED
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
vision Adꢁisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XH-G LED
MECHANICAL DIMENSIONS
All dimensions are ±.13 mm unless otherwise indicated.
NOTCH IS ON
CATHODE (-)
SIDE
.635
3.00
.10
1.60
.70
3.00
.50
.10
.7 .ꢀ ꢁꢁ
2.80
Top vieꢂ
Side vieꢂ
bottom vieꢂ
.50
.50
1.70
1.35
.80
.70
1.20
2.70
3.00
.33
.30
1.34
.25
Recommended PC board Solder Pad
Recommended Metal Stencil Mask
(Hatched Area is Open)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XH-G LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions are ±.13 mm unless otherwise indicated.
CATHODE SIDE
ANODE SIDE
User Feed Direction
END
START
Loaded Pockets
(1,000 Lamps)
Trailer
Leader
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
16.40
User Feed Direction
Cover Tape
Pocket Tape
13mm
62
+
0
0.20
12.40
MEASURED AT HUB
7"
+
0
3.20
12.40
MEASURED AT INSIDE EDGE
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XH-G LED
PACꢃAGING
Thꢀ diagrams bꢀlow show thꢀ packaging and labꢀls Crꢀꢀ usꢀs to ship XLamp XH-G LeDs. XLamp XH-G LeDs arꢀ shippꢀd in tapꢀ loadꢀd
on a rꢀꢀl. each box contains only onꢀ rꢀꢀl in a moisturꢀ barriꢀr bag.
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
相关型号:
©2020 ICPDF网 联系我们和版权申明