CR1602AC [CRYDOM]
Silicon Surge Protector, 95V V(BO) Max, 500A, MODIFIED TO-220, 3 PIN;
| 型号： | CR1602AC |
| 厂家： | 
CRYDOM INC., |
| 描述： | Silicon Surge Protector, 95V V(BO) Max, 500A, MODIFIED TO-220, 3 PIN |
| 文件： | 总9页 (文件大小：304K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S i B OD™ S e r i e s
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD™
S e r i e s
Specify Crydom
Get TVS Insurance From
The People Who Know
There’s too much riding on over-voltage
surge protection to take chances. That’s
why more and more people are turning
to Crydom.
Crydom’s SiBOD Series Equals
“Crow Bar” Protection
… for these industry-leading
components and products:
To protect sensitive telecommunications
circuitry, Crydom Thyristors (SiBOD™
Breakover Devices) “crow bar” potential-
ly dangerous transients – switching them
to ground and dissipating the voltage to
zero. This approach can handle more
energy than TVS diode “clamping.”
•
Solid State Relays
Printed Circuit Board Mount
Panel Mount
Why?
To start with, we don’t just sell TVS compo-
nents – we’re the only company develop-
ing, designing and manufacturing all five
of the basic product families: Transient
Voltage Suppression (TVS) Diodes. SiBOD™
Thyristor Suppression Devices. Gas Discharge
Tubes (GDT). Hybrid Arrester Over-Voltage
Surge Protectors. Zeners/Studs. And the
only company employing all three voltage
protection technologies – gas tube, semi-
conductor and hybrid.
DIN Rail Mount
FEATURES
•
•
•
Power Cubes
I/O Modules
• Glass passivated junction
• Bi-directional transient voltage
protection
• Nano second clamping response
• Surge capability up to 500 amps
• No performance degradation under
service life
Transient Voltage
Suppression Components
TVS Diodes
Thyristor Suppression
Devices
BENEFITS
• One component cost for +ve
and -ve protection
• Excellent voltage protection levels
• Can be used for primary or secondary
protection
• No replacement required ie,
no maintenance cost
• Highest level of quality and reliability
• Low cost auto assembly
Gas Discharge Tubes (GDT)
Zeners/Studs
That means we're the only one who knows
them inside and out. What each type can
and can't do. Which type to use for differ-
ent applications. How to provide as much
or little technical support as you need.
How to work with you to develop special
devices should you require them. And
even assist you in formulating design
requirements and testing procedures to
meet both your specifications and inter-
national standards.
Hybrid Arrester Devices
MECHANICAL CHARACTERISTICS
• Transfer molded, void free epoxy body
• Tin/Lead plated leads
• Maximum case temperature for solder-
ing purposes: 230°C for 10 seconds
To Order: 1-877-502-5500 Fax: 1-858-715-7280
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
Ap p l i c a t i o n N o t e s
The Added Crydom Benefit
When a transient occurs, the voltage across
the SiBOD will increase until the breakdown
voltage (VBR) is reached. At this point the
device will operate in a similar way to a
TVS device and is in an avalanche mode.
Crydom Thyristors (SiBOD™ Breakover
Devices) offer the highest quality and
performance. They also come with an
added benefit – service and technical
assistance to help ensure optimum pro-
tection for your telecommunications
application.
PABX PROTECTION
CR1300SB
The voltage of the transient will now be
limited and will only increase by a few
volts as the device diverts more current.
As this transient current rises, a level of
current through the device is reached
(IBO), causing the device to switch to a
fully conductive state such that the volt-
age across the device is now only a few
volts (VT). The voltage at which the device
switches from the avalanche mode to the
fully conductive state (VT) is known as the
breakover voltage (VBO). When the device
is in the VT state, high currents can be
diverted without damage to the SiBOD
due to the low voltage across the device,
since the limiting factor in such devices is
dissipated power (V X I).
CR1300SB
SiBOD Series
The Crydom SiBOD is a four-layer thyristor-
based protector designed specifically for
telecommunications applications. It has
greater capacity for diverting surge cur-
rents than an avalanche TVS device.
DC SUPPLY
V
C
I
H >
R
R
Equipment
to be
protected
V
C
The Crydom series protector is based on
the proven technology of the SiBOD prod-
uct. Designed for transient voltage protec-
tion of telecommunications equipment, it
provides higher power handling than a
conventional avalanche diode (TVS), and
when compared to a GDT offers lower volt-
age clamping levels and infinite surge life.
SLIC PROTECTION
Line
CR0640SB
To SLIC
CR0640SB
Line
Resetting of the device to the nonconduct-
ing state is controlled by the current flowing
through the device. When the current falls
below a certain value, known as the holding
current (IH), the device resets automatically.
Electrical Characteristics
or
Line
The electrical characteristics of the
SiBOD devices are similar to those of a
self-gated Triac, but the SiBOD are two-
terminal devices with no gate. The gate
function is achieved by an internal current
controlled mechanism.
(-)
(-)
(-)
(+) To SLIC
CR0640SB
As with the avalanche TVS device, if the
SiBOD device is subjected to a surge
current that is beyond its maximum rating,
the device will fail in short-circuit mode,
which ensures that the equipment is
ultimately protected.
Line
Like the TVS diodes, the SiBOD have a
stand-off voltage (VRM) that should be equal
to or greater than the operating voltage of
the system to be protected. At this voltage
(VRM) the current consumption of the SiBOD
are negligible and will not effect the pro-
tected system.
COMPLETE PC BOARD
OPERATION PROTECTION
Integrated
SLIC
On-hook
Line
CR0640
SB
(-)
(-)
(-)
CR2300
SB
Off-hook
Ring
(+)
relay
On-hook
Off-hook
Line
Primary
protection
on-hook
Secondary
protection
off-hook
Ring
Generator
-V
Battery
or
Ring
Detection
Circuit
2
To Order: 1-877-502-5500 Fax: 1-858-715-7280
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
Ap p l i c a t i o n N o t e s
Selecting a SiBOD Device
The SiBOD range can be used to protect against surges
as defined in the following International Standards
1. When selecting a device, it is important
that the VRM of the device be equal to or
greater than the operating voltage of the
system. For example, when protecting
the ringing circuit of a telephone handset,
SiBOD VRM > VDC + RINGING VOLTAGE
SiBOD VRM > VDC + V√2X RINGING VOLTAGE
VOLTAGE
VOLTS
WAVEFORM
µSEC
Standard
WAVEFORM
µSEC
CURRENT
AMPS
SIBOD
SERIES
FCC Part 68
800
10x560
10x160
5x320
Surge A Metallic
10x560
10x160
9x720
100
200
25
B or C
C
1500
1000
1500
Surge A Longitudinal
Surge B Metallic
A, B or C
A, B or C
5x320
Surge B Longitudinal
9x720
37.5
2. The minimum holding current (IH) of the
device must be carefully selected if the
SiBOD is to reset after diverting a surge.
The minimum IH value of the SiBOD must
be greater than the current the system is
capable of delivering, otherwise the
device will remain conducting following
a transient condition.
Bellcore GR 1089
600
10x1000
10x360
10x1000
2x10
1
10x1000
10x360
10x1000
2x10
100
100
100
500
25
C
1000
1000
2500
1000
1500
1000
1500
4000
1500
1000
2000
2000
Level 3
Level 4
2000
2
B or C
3
C
4
C
10x360
5x310
5x310
5x310
5x310
.2x310
.8x310
5x310
1x20
5
10x360
10x700
10x700
10x700
10x700
.5x700
.5x700
10x700
1.2x50
10x700
1.2x50
10x700
A, B or C
A, B or C
A, B or C
A, B or C
B or C
ITU K.17
ITU K.20
ITU K.21
37.5
25/100
37.5
100
38
IH> SYSTEM VOLTAGE
SOURCE IMPEDANCE
RLM 88, CNET
CNET 131-24
VDE 0433
A, B or C
A, B or C
A, B or C
A, B or C
A, B or C
A, B or C
A, B or C
25
50
VDE 0878
50
5x310
8x20
IEC 61000-4-5
50
100
50
5x310
FTZ R12
To Order: 1-877-502-5500 Fax: 1-858-715-7280
3
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
V-I Graph Illustrating Symbols and Terms
for the SiBOD Surge Protection Devices
IT
IH
IBO
IRM
VT
VRM VBR VBO
MIN.
tr
VRSM
100
90
t
t
tr=1.67 x (t -t )=1.2µs
2 1
2
1
ELECTRICAL CHARACTERISTICS
(Tj = 25°C)
SYMBOL
VRM
VBR
VBO/VS
VT
PARAMETER
VRSM
50
30
Stand-off voltage
Breakdown voltage
Breakover voltage
On-state voltage
Stand-off current
Breakover current
Holding current
td = 50 µs
10 20 30 40 50 60 70
IRM
Time (µs)
IBO
IH
Co
Off state Capacitance
Peak pulse current
Ipp
tr
1
RSM
100
90
or
t
2
1
SM
tr = 1.25 x (t -t ) = 8 µs
2
1
1
RSM
50
10
td=
20 µs
t
1
10
2 0
30
Time (µs)
40
50
ABSOLUTE RATINGS
VALUE
PARAMETER
DO-214
TO-220
T10
UNIT
SYMBOL
Storage and operating junction
temperature range
-40 to 150 -40 to 150 -40 to 150
C˚
T stg
150
230
150
230
150
230
C˚
C˚
Tj
Maximum temperature for soldering
(For period of 10 seconds max.)
Maximum case temperature
TL
75
115
75
C˚
TC
4
To Order: 1-877-502-5500 Fax: 1-858-715-7280
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
DO- 2 1 4
DO- 214
TAPE & REEL PACKAGING
Our surface-mount components are
placed in embossed cavities of anti-stat-
ic/conductive carrier tape and sealed
Cover tape
2.0
3.30-3.81
with a cover tape. The taped devices are
supplied in reels in protective boxes. The
Embossed carrier
standard Crydom lead-tape packaging of
surface-mount components follow the
requirements of EIA 481-1, shown below:
• Cover Tape: This will not extend over
the edge of the carrier tape or extend
over any part of the sprocket holes.
• Carrier Tape: This will release from the
reel hub as the last portion of the tape
unwinds from the reel without damage to
the carrier tape and with the components
remaining in the cavities.
5.21/5.59
4.06/4.57
JEDEC CASE
TYPE
TAPE
WIDTH
(mm)
QUANTITY PER REEL
330mm Reel
(øD) (T3)
2.18/2.44
.102
DO-214AA
12
3000
.203
0.76/1.27
0.076 max.
Seating Plane
Sprocket holes
2.1
2.74
2.16
2.26
• Leader Tape: A minimum length of
300mm leader (and trailer) of tape will
be provided before the first (and after
the last) component on the reel, with a
minimum of forty empty component car-
rier pockets covered with tape.
Direction of tape feed
Solder pads
All dimensions in mm
Electrical Characteristics
*
Stock
Number
Device Code
Reverse
Stand-off
Voltage
Maximum
Breakover
Voltage
Maximum
Voltage
Turnon
Maximum
Reverse
Leakage
Maximum
Breakover
Current
(IBO)
Minimum
Holding
Current
(IH)
Typical
Capacitance
@1MHz
(V )
(VBO) @ IBO
(V @ 1A
(IR) @ V
2V Bias
R
T)
R
V
V
V
5
5
5
5
5
5
5
5
5
5
5
5
5
µA
5
5
5
5
5
5
5
5
5
5
5
5
5
mA
mA
pF
CR0300 SA, SB, SC
CR0640 SA, SB, SC
CR0720 SA, SB, SC
CR0800 SA, SB, SC
CR1100 SA, SB, SC
CR1300 SA, SB, SC
CR1500 SA, SB, SC
CR1800 SA, SB, SC
CR2300 SA, SB, SC
CR2600 SA, SB, SC
CR3100 SA, SB, SC
CR3500 SA, SB, SC
CR4000 SA, SB, SC
030 A, B, or C
064 A, B, or C
072 A, B, or C
080 A, B, or C
110 A, B, or C
130 A, B, or C
150 A, B, or C
180 A, B, or C
230 A, B, or C
260 A, B, or C
310 A, B, or C
350 A, B, or C
400 A, B or C
25
40
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
200.0
120.0
90.0
90.0
90.0
60.0
60.0
60.0
45.0
45.0
45.0
45.0
45.0
58
77
65
88
75
98
90
130
160
180
220
260
300
350
400
450
120
140
160
190
220
275
320
375
*Note: The typical capacitance values listed in this chart are for SA and SB. SC capacitance is approximately double that of SA and SB.
CR
S
Peak Pulse
SA
SB
SC
Voltage
2/10µs
-
-
500
400
200
-
8/20µs
150
100
50
-
250
150
100
-
PP Maximum
A = 50A (10 x 560 µs)
B = 100A (10 x 560 µs)
C = 500A (2 x 10 µs)
10/160µs
10/560µs
10/1000µs
100
To Order: 1-877-502-5500 Fax: 1-858-715-7280
5
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
TO- 2 2 0
Electrical Characteristics (2 chip)
Part
Number
Reverse
Stand-off
Voltage
Maximum
Breakover
Voltage
Reverse
Stand-off
Voltage
Maximum
Breakover
Voltage
Typical
Voltage
Turnon
Maximum
Reverse
Leakage
Maximum
Breakover
Current
(IBO)
Minimum
Holding
Current
(IH)
*Typical
Cap.
@1MHz
2V Bias
(V )
(VBO) @ IBO
(V )
(VBO) @ IBO
(V @ 1A
(IR) @ V
R
R
T)
R
pins 1-2 & 3-2
pins 1-3
V
V
V
V
V
µA
mA
mA
pF
50.0
80.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
CR0602 AA, AB, AC
CR1402 AA, AB, AC
CR1602 AA, AB, AC
CR2202 AA, AB, AC
CR2702 AA, AB, AC
CR3002 AA, AB, AC
CR3602 AA, AB, AC
CR4202 AA, AB, AC
CR4802 AA, AB, AC
CR6002 AA, AB, AC
25.0
40.0
200.0
120.0
90.0
90.0
60.0
60.0
60.0
45.0
45.0
45.0
116.0
130.0
180.0
240.0
280.0
320.0
380.0
440.0
550.0
154.0
190.0
260.0
320.0
360.0
440.0
500.0
600.0
700.0
58.0
77.0
65.0
95.0
90.0
130.0
160.0
180.0
220.0
250.0
300.0
350.0
120.0
140.0
160.0
190.0
220.0
275.0
*Note: The typical capacitance values listed in this chart are for AA and AB. AC capacitance is approximately double that of AA and AB.
Electrical Characteristics (3 chip)
Part
Number
Reverse
Stand-off
Voltage
Maximum
Breakover
Voltage
Reverse
Stand-off
Voltage
Maximum
Breakover
Voltage
Typical
Voltage
Turnon
Maximum
Reverse
Leakage
Maximum
Breakover
Current
(IBO)
Minimum
Holding
Current
(IH)
* Typical
Cap.
@1MHz
2V Bias
(V )
(VBO) @ IBO
(V )
(VBO) @ IBO
(V @ 1A
(IR) @ V
R
R
T)
R
pins 1-2 & 3-2
pins 1-3
V
V
V
V
V
µA
mA
mA
pF
CR1553 AA, AB, AC
CR1803 AA, AB, AC
CR2103 AA, AB, AC
CR2353 AA, AB, AC
CR2703 AA, AB, AC
CR3203 AA, AB, AC
CR3403 AA, AB, AC
130.0
150.0
170.0
200.0
230.0
270.0
300.0
180.0
210.0
250.0
270.0
300.0
350.0
400.0
130.0
150.0
170.0
200.0
230.0
270.0
300.0
180.0
210.0
250.0
270.0
300.0
350.0
400.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
800.0
800.0
800.0
800.0
800.0
800.0
800.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
60.0
60.0
60.0
60.0
45.0
45.0
45.0
*Note: The typical capacitance values listed in this chart are for AA and AB. AC capacitance is approximately double that of AA and AB.
Peak Pulse
AA
AB
AC
Mo d i fi e d
TO- 220
4.52 4.78
2/10µs
-
-
500
400
200
-
10.16
10.42
8/20µs
150
100
50
-
250
150
100
-
10/160µs
10/560µs
10/1000µs
100
CR
A
Voltage
PP Maximum
A = 50A (10 x 560 µs)
B = 100A (10 x 560 µs)
C = 500A (2 x 10 µs)
0.8
0.46
0.61
2.54
All dimensions in mm
5.08
6
To Order: 1-877-502-5500 Fax: 1-858-715-7280
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD S e r i e s
T1 0 A, T1 0 B , T1 0 C
Electrical Characteristics
T10A
DEVICE
TYPE
VRM
(V)
IRM
@ VRM
(µA)
VBR
MIN. @ 1 mA
(V)
VBO
MAX.
(V)
VT TYP
@ 1A
(V)
IBO TYP
(mA)
IH
MIN.
(mA)
T10 A, B, C 080 70
T10 A, B, C 110 100
T10 A, B, C 140 120
T10 A, B, C 180 170
T10 A, B, C 220 200
T10 A, B, C 270 240
1
1
1
1
1
1
80
120
135
170
210
265
360
2
2
2
4
4
4
50
50
50
50
50
50
B or E
B or E
B or E
B or E
B or E
B or E
110
140
180
215
270
MINIMUM HOLDING CURRENTS IH MIN.
Suffix
B
IH
T10C
120
180
E
FEATURES
• High current diverting capability,
150 A, 8 X 20 µs)
• Low capacitance, less than 100 pF
Peak Pulse
T10A
T10B
T10C
8/20µs
150
37.5
50
250
125
100
250
125
100
10/700 1-5kv
10/1000µs
T10B
Ø1.016±0.050
25.4 min.
+0.127
Ø5.080
-0.254
+0.127
9.400
-0.254
T10
25.4 min.
Package
A = DO15
B = DO-201
C = GDT outline
All dimensions in mm
Voltage
Holding current
B = 120 I
E = 180 I
H
min.
min.
H
To Order: 1-877-502-5500 Fax: 1-858-715-7280
7
Th yr i s t o r s (S i BOD™ Br e a k o ve r De vi c e s )
S i B OD™ S e r i e s
Specify Crydom
Orde ring Informa tion
For recommended applications and more
information contact:
About Crydom
… for these industry-leading
components and products:
Over the years Crydom has become the
supplier of choice for advanced, high-quality
products like those featured here. It's the
result of our teams of design and production
engineers – material, production control,
and quality assurance experts, and more –
working seamlessly together to create, pro-
duce, and deliver superior components and
products that satisfy the most demanding
environmental and performance require-
ments. We focus on timely delivery and
competitive pricing aimed at meeting your
needs and helping you succeed in today's
fast-paced, fast-changing global markets.
Sales: 1-877-502-5500
•
Solid State Relays
Printed Circuit Board Mount
Panel Mount
Technical support: 1-877-702-7700
Corporate Headquarters: 1-858-715-7200
Fax: 1-858-715-7280
DIN Rail Mount
E-mail: sales@crydom.com
Website: www.crydom.com
FASTFAX Product Info: 1-888-267-9191
•
•
•
Power Cubes
I/O Modules
Transient Voltage
Suppression Components
TVS Diodes
Thyristor Suppression
Devices
Gas Discharge Tubes (GDT)
Zeners/Studs
Hybrid Arrester Devices
Crydom
9525 Chesapeake Drive
San Diego, CA 92123 USA
©1999 Crydom
Specifications subject to change without notice.
CRYDOM SiBOBSeries 1099-5000 Ver A
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明