首页 |元器件品牌

D2425GT [CRYDOM]

Trigger Output SSR,;
D2425GT
型号： D2425GT
厂家： CRYDOM INC.,    CRYDOM INC.,
描述：

Trigger Output SSR,

输出元件 光电
文件： 总8页 (文件大小：709K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Panel Mount  
Datasheet  
Series 1T 240 VAC  
• Ratings from 10A to 125A @ 24-280 VAC  
• SCR output for heavy industrial loads  
• AC or DC control  
• Direct bond copper substrate  
• Direct power lead frame  
• Epoxy free design  
• Zero voltage or instantaneous turn-on outputs  
• UL/CSA/VDE Approved, CE Compliant to EN60950-1  
• Improved SEMS screw and washer  
• Redesigned housing with anti-rotation barriers  
For Generation 3 datasheet click here  
PRODUCT SELECTION  
Control Voltage  
10A  
D2410T  
A2410T  
A2410ET  
25A  
D2425T  
A2425T  
A2425ET  
50A  
D2450T  
A2450T  
A2450ET  
75A  
D2475T  
A2475T  
A2475ET  
90A  
D2490T  
A2490T  
A2490ET  
110A  
D24110T  
A24110T  
A24110ET  
125A  
D24125T  
A24125T  
A24125ET  
3-32 VDC  
90-280 VAC  
18-36 VAC  
AVAILABLE OPTIONS  
Control Voltage  
A: 90-280 VAC  
D: 3-32 VDC  
Overvoltage Protection  
Blank: Not Included  
P: Included (3)  
Thermal Pad  
Blank: Not Included  
H: Included  
Switching Type  
Blank: Zero Voltage Turn-On  
-10: Instantaneous Turn-On (4)  
AxxxxE: 18-36 VAC  
A
E
K
P
G
24  
10  
H
T
-10  
-B  
Operating  
Voltage  
Rated Load Current  
Termination  
Input Status LED  
Trigger Circuit  
Output Type  
10: 10 Amps  
Blank: Screw  
Blank: Not Included  
G: Included  
T: Phototransistor  
(Not needed with -B suffix,  
included as standard)  
-B: Normally Closed  
(Not available with  
-10 option)  
24: 24-280 VAC 25: 25 Amps  
F: Quick Connect (1)  
(Up to 50 Amps)  
K: Hex standoffs (2)  
50: 50 Amps  
75: 75 Amps  
90: 90 Amps  
110: 110 Amps  
125: 125 Amps  
Required for valid part number  
For options only and not required for valid part number  
* Not all part number combinations are available.  
Contact Crydom Technical support for information on  
the availability of a specific part number.  
OUTPUT SPECIFICATIONS (5)  
Description  
Operating Voltage Range (47-63Hz) [Vrms]  
Transient Overvoltage [Vpk]  
10A  
24-280  
600  
25A  
24-280  
600  
50A  
24-280  
600  
75A  
24-280  
600  
90A  
24-280  
600  
110A  
24-280  
600  
125A  
24-280  
600  
Maximum Off-State Leakage Current @ Rated Voltage [mArms]  
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]  
Maximum Load Current [Arms] (2)(6)  
10  
500  
10  
10  
500  
25  
10  
500  
50  
10  
500  
75  
10  
500  
90  
10  
500  
110  
10  
500  
125  
Minimum Load Current [mArms]  
40  
40  
40  
40  
40  
150  
150  
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]  
Maximum On-State Voltage Drop @ Rated Current [Vrms] (7)  
Thermal Resistance Junction to Case (Rjc) [°C/W]  
Maximum I²t for Fusing (50/60Hz) [A² sec]  
Minimum Power Factor (at Maximum Load)  
115/120  
1.15  
1.03  
66/60  
0.5  
239/250  
1.15  
0.8  
285/259  
0.5  
597/625  
1.15  
0.45  
1779/1621  
0.5  
954/1000  
1.15  
0.3  
4555/4150  
0.5  
1145/1200  
1.15  
0.27  
6560/5976  
0.5  
1432/1500  
1.15  
0.25  
10249/9338  
0.5  
1670/1750  
1.15  
0.22  
13950/12709  
0.5  
INPUT SPECIFICATIONS (5)  
Description  
Control Voltage Range  
D24xxT  
3-32 VDC  
A24xxT  
90-280 Vrms  
A24xxET  
18-36 Vrms  
(9)  
Minimum Turn-On Voltage (8)  
Must Turn-Off Voltage (10)  
3.0 VDC  
1 VDC  
3.4  
30  
1.5K  
90 Vrms  
10 Vrms  
2
4.9  
60K  
10  
18 Vrms  
4 Vrms  
Minimum Input Current for on-state [mA]  
Maximum Input Current for on-state [mA]  
Nominal Input Impedance [Ohms]  
Maximum Turn-on Time [msec]  
Maximum Turn-off Time [msec]  
2
4
9K  
10  
40  
1/2 Cycle(11)  
1/2 Cycle  
40  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
GENERAL SPECIFICATIONS(5)  
Description  
Parameters  
4000 Vrms  
Dielectric Strength, Input/Output/Base (50/60Hz)  
Minimum Insulation Resistance (@ 500 VDC)  
Maximum Capacitance, Input/Output  
Ambient Operating Temperature Range  
Ambient Storage Temperature Range  
Weight (typical)  
109 Ohm  
8 pF  
-40 to 80 °C  
-40 to 125 °C  
2.64 oz (74.9 gr)  
UL 94 V-0  
Housing Material  
Baseplate Material  
Aluminum  
Input Terminal Screw Torque Range [in-lbs/Nm]  
Load Terminal Screw Torque Range [in-lb/Nm]  
SSR Mounting Screw Torque Range [in-lb/Nm]  
Input/Load Terminal Screw Torque Range [in-lb/Nm] (2)  
Input/Output Terminal Screw Thread Size  
Humidity per IEC60068-2-78  
13-15 / 1.5-1.7  
18-20 / 2.0-2.2  
18-20 / 2.0-2.2  
w/”K” option 8-10 / 0.9-1.13  
#6-32 UNC / #8-32 UNC  
93% non-condensing  
LED Input Status Indicator  
w/”G” option (green)  
11,641,553 hours (1,328 years)  
7,210,376 hours (823 years)  
MTBF (Mean Time Between Failures) at 40°C ambient temperature (12)  
MTBF (Mean Time Between Failures) at 60°C ambient temperature (12)  
WIRING DIAGRAM  
AC  
V
Input Current vs Input Voltage  
“T” Option - Low Voltage Output  
Recommended Wire Sizes  
30  
(13)  
Load  
Wire Size  
(Solid / Stranded)  
Wire Pull-Out  
Strength (lbs)[N]  
25  
20  
Terminals  
Input  
Instantaneous  
Turn On  
1
(
)
2
(
)
24 AWG (0.2 mm2) / 0.2 [minimum]  
2 x 12 AWG (3.3 mm2) / 3.3 [maximum]  
20 AWG (0.5 mm2) / 0.518 [minimum]  
2 x 10 AWG (5.3 mm2) / 5.3  
10 [44.5]  
90 [400]  
30 [133]  
110 [490]  
90 [400]  
15  
10  
5
2
3
1
OUTPUT  
S O L I D S T AT E R E L AY  
Zero Turn On  
Output  
4
INPUT  
2 x 8 AWG (8.4 mm2) / 8.4 [maximum]  
0
0
5
10  
15  
20  
25  
30  
DC Input Voltage  
4
(– /  
)
3
(+ /  
)
EQUIVALENT CIRCUIT BLOCK DIAGRAMS  
Diagram: D24xxT  
Diagram: A24xxT, A24xxET  
4
3
1
2
4
3
1
2
-
DC  
AC  
AC  
-
DC  
AC  
AC  
AC/DC  
Converter  
Trigger  
Circuit  
Trigger  
Circuit  
(15)  
(15)  
(14)  
(14)  
+DC  
+DC  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
MECHANICAL SPECIFICATIONS (5)  
Tolerances: 0.02 in / 0.5 mm  
All dimensions are in: inches [millimeters]  
(2)  
Screw Termination  
Hex Standoff Termination (“K” Option)  
1.1  
1.1  
Mounting  
0.89  
[22.6]  
[27.9]  
1.04  
[26.4]  
[27.9]  
Hole/Slot  
0.19 [4.9]  
DIA.  
Mounting  
0.49  
[12.4]  
0.49  
[12.4]  
Hole/Slot  
0.19 [4.9]  
DIA.  
2
3
1
OUTPUT  
2
3
1
OUTPUT  
S O L I D S T AT E R E L AY  
2.25  
[57.3]  
1.70  
[43.2]  
1.88  
[47.6]  
S O L I D S T AT E R E L AY  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
4
INPUT  
4
INPUT  
0.93  
[23.6]  
1.0  
1.0  
[25.4]  
[25.4]  
(4 places)  
1.75  
[44.5]  
1.75  
[44.5]  
1.0  
[25.4]  
(2 places)  
Quick Connect Termination (“F” Option) - Up to 25 Amp (1)  
Quick Connect Termination (“F” Option) - Up to 50 Amp (1)  
Faston Terminal(16)  
0.25 x 0.032  
1.58  
1.58  
[40.2]  
0.63  
1.31  
[33.4]  
1.31  
[33.4]  
Faston Terminal(16)  
0.25 x 0.032  
[40.2]  
Mounting  
Hole/Slot  
0.19 [4.9]  
DIA.  
Mounting  
Hole/Slot  
0.19 [4.9]  
DIA.  
(4 places)  
0.49  
[12.4]  
(2 places)  
[16.0]  
0.45  
[11.4]  
(2 places)  
2
3
1
OUTPUT  
2
3
1
OUTPUT  
S O L I D S T AT E R E L AY  
S O L I D S T AT E R E L AY  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
4
INPUT  
4
INPUT  
0.49  
1.40  
Faston Terminal(16)  
0.187 x 0.020  
[12.4]  
[35.6]  
Faston Terminal(16)  
0.187 x 0.020  
1.40  
[35.6]  
1.75  
1.25  
[31.8]  
1.75  
[44.5]  
1.25  
[31.8]  
(2 places)  
(2 places)  
[44.5]  
GENERAL NOTES  
(1) Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect both pairs.  
(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50  
Amps. For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.  
(3) Output will self trigger between 450-600Vpk, Min., not suitable for capacitive loads.  
(4) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.  
(5) All parameters at 25°C unless otherwise specified.  
(6) Heat sinking required, see derating curves.  
(7) For 40mA minimum current, the voltage drop increases over maximum rated.  
(8) Maximum turn-on voltage for -B option is: 1VDC for DC control, 10Vrms for AC control, and 4Vrms for E control range.  
(9) For relays with option “G” minimum control voltage is 4.5VDC.  
(10) Must turn-off voltage for -B option is: 3VDC for DC control, 90Vrms for AC control, and 18Vrms for E control range.  
(11) Turn-on time for Instantaneous turn-on versions is 0.02 msec (DC Control Models).  
(12) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).  
(13) Load can be wired to either SSR output terminal 1 or 2.  
(14) Elective Input Status LED, “G” option.  
(15) Elective Overvoltage Protection, “P” option.  
(16) Mechanical dimensions vary from G3 models.  
For additional information or specific questions, contact Crydom Technical Support.  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
SURGE CURRENT INFORMATION  
10 A  
25 A  
120  
250  
100  
80  
60  
40  
20  
0
200  
150  
100  
50  
0
0.01  
0.01  
0.1  
1
10  
0.1  
1
10  
Surge Duration (Secs)  
Surge Duration (Secs)  
50 A  
75 A  
600  
500  
400  
300  
200  
100  
0
900  
800  
700  
600  
500  
400  
300  
200  
100  
0
0.01  
0.1  
1
10  
0.01  
0.1  
1
10  
Surge Duration (Secs)  
Surge Duration (Secs)  
90 A  
110 A  
1200  
1050  
900  
750  
600  
450  
300  
150  
0
1500  
1200  
900  
600  
300  
0
0.01  
0.1  
1
10  
0.01  
0.1  
1
10  
Surge Duration (Secs)  
Surge Duration (Secs)  
125 A  
1800  
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
0.01  
0.1  
1
10  
Surge Duration (Secs)  
Non repetitive peak surge current at Tj initial 40ºC.  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
THERMAL DERATE INFORMATION  
10 A  
25 A  
50 A  
3ºC/W  
5ºC/W  
1.5ºC/W  
2ºC/W  
0.7ºC/W  
1ºC/W  
No Heatsink  
3ºC/W  
1.5ºC/W  
2ºC/W  
10  
8
25  
20  
15  
10  
5
50  
40  
30  
20  
10  
0
6
4
2
0
0
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
75 A  
90 A  
110 A  
0.5ºC/W  
0.7ºC/W  
0.5ºC/W  
0.7ºC/W  
0.5ºC/W  
0.7ºC/W  
1ºC/W  
1.5ºC/W  
1ºC/W  
1.5ºC/W  
1ºC/W  
1.5ºC/W  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
75  
60  
45  
30  
15  
0
120  
100  
80  
60  
40  
20  
0
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
125 A  
0.5ºC/W  
0.7ºC/W  
1ºC/W  
120  
100  
80  
60  
40  
20  
0
20  
30  
40  
50  
60  
70  
80  
Ambient Temperature (ºC)  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
AGENCY APPROVALS  
EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:  
Designed in accordance with the requirements of IEC 62314  
IEC 61000-4-2 : Electrostatic Discharge – Level 3  
IEC 61000-4-4 : Electrically Fast Transients – Level 3  
IEC 61000-4-5 : Electrical Surges – Level 3  
IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz  
IEC 600068-2-27: Shock Resistance 15g/11ms  
E116949  
LR81689  
10143 UG (Not Applicable: -B and 4D)  
ACCESORIES  
Recommended Accessories  
New Accessories!  
Protective Cover & Hardware Kits  
Protective Cover  
Part number: KS101  
Cover  
Hardware  
Kit  
Heat Sink  
Part No.  
Thermal Resistance Lug Terminal Thermal Pad  
[ºC/W]  
Clear plastic cover compatible with all new  
S1 designs. Safety covers provide added  
protection from electric shock when  
installing or checking equipment.  
5.0  
HS501DR  
KS101  
HK1  
HK4  
TRM1  
TRM6  
HSP-1  
HSP-2  
3.0  
HS301 / HS301DR  
HS251  
2.5  
2.0  
HS202 / HS202DR  
HS201 / HS201DR  
HS172  
2.0  
Hardware Kit  
1.7  
Part number: HK4  
HS151 / HS151DR  
HS122 / HS122DR  
HS103 / HS103DR  
HS101  
1.5  
Bag with 2 square brass accessories and 2  
screw 8-32 x 5/8 for output. Used to mount  
TMR1 lug terminals.  
1.2  
1.0  
1.0  
HS073  
0.7  
HS072  
0.7  
HS053  
0.5  
HS033  
0.36  
0.25  
HS023  
Rev. 061716  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险  
HAZARD OF  
ELECTRIC  
SHOCK,  
EXPLOSION,  
OR ARC FLASH.  
RIESGO DE  
DESCARGA  
ELECTRICA O  
EXPLOSION.  
RISQUE DE  
GEFAHR EINES  
ELEKTRISCHE  
N SCHLAGES  
ODER EINER  
EXPLOSION.  
RISCHIO DI  
SCOSSA  
ELETTRICA O  
DELL’ESPLOSIONE.  
存在电击、  
爆炸或电弧  
闪烁危险  
DESCHARGE  
ELECTRIQUE  
OU EXPLOSION  
•
在操作此设  
备之前请先  
关闭电源。  
• Eteindre  
toutes les  
sources  
d'énergie de  
cet appareil  
avant de  
travailler  
dessus de cet  
appareil  
• Spenga tutta  
l'alimentazione  
che fornisce  
questa  
apparecchiatura  
prima di lavorare  
a questa  
• Desconectar  
todos los  
suministros de  
energia a este  
equipo antes  
de trabajar  
• Disconnect all  
power before  
installing or  
working with  
this equipment.  
• Stellen Sie  
jeglichen  
Strom ab, der  
dieses Gerät  
versorgt, bevor  
Sie an dem  
若不遵守这些说明，  
可能会导致严重的  
人身伤害甚至死亡。  
con este equipo.  
• Verify all  
connections  
and replace all  
covers before  
turning on  
Gerät Arbeiten  
durchführen  
apparecchiatura  
• Verificar todas  
las conexiones  
y colocar todas  
las tapas antes  
de energizer  
• Verificare tutti  
i collegamenti  
e sostituire  
tutte le coperture  
prima  
• Vor dem  
Drehen auf  
Energie alle  
Anschlüsse  
überprüfen  
und alle  
• Vérifier tous  
connections, et  
remettre tous  
couverts en  
olace avant de  
mettre sous  
power.  
el equipo.  
Failure to follow  
these  
instructions will  
result in death  
or serious injury.  
dell’accensione  
El  
Abdeckungen  
ersetzen.  
L'omissione di  
queste istruzioni  
provocherà la  
morte o  
incumplimiento  
de estas  
instrucciones  
puede provocar  
la muerte o  
lesiones serias.  
De non-suivi de  
ces instructions  
provoquera la  
mort ou des  
lésions sérieuses  
sérieuses.  
Unterlassung  
dieser  
Anweisungen  
können zum  
Tode oder zu  
schweren  
lesioni serie  
Verletzungen  
führen.  
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告  
RISQUE DE DOMMAGE MATERIEL ET DE  
SURCHAUFFE DU BOITIER  
GEFAHR VON MATERIALSCHÄDEN UND  
GEHÄUSEERHITZUNG  
RISK OF MATERIAL DAMAGE AND HOT  
ENCLOSURE  
• Les panneaux latéraux du produit peuvent être  
chauds. Laisser le produit refroidir avant de le  
toucher.  
• Respecter les consignes de montage, et  
notamment les couples de serrage.  
• Ne pas laisser pénétrer de liquide ni de corps  
étrangers à l'intérieur du produit.  
• Die Seitenwände können heiß sein. Lassen Sie  
das Produkt abkühlen, bevor Sie es berühren.  
• Beachten Sie die Montageanweisungen,  
• Führen Sie keine Flüssigkeiten oder  
• The product's side panels may be hot, allow  
the product to cool before touching.  
• Follow proper mounting instructions including  
torque values.  
• Do not allow liquids or foreign objects to enter  
this product.  
Fremdkörper in das Produkt ein.  
Le non-respect de cette directive peut entraîner,  
des lésions corporelles graves ou des  
dommages matériels.  
Die Nichtbeachtung dieser Anweisung kann  
Körperverletzung oder Materialschäden  
zur Folge haben.  
Failure to follow these instructions can result in  
serious injury, or equipment damage.  
RIESGO DE DAÑOS MATERIALES Y DE  
SOBRECALENTAMIENTO DE LA UNIDAD  
材料损坏和高温外壳的危险性  
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO  
CALDO  
• 产品的一侧面板可能很热，在其冷却前请  
 不要触碰。  
• 遵照正确的安装说明，包括扭矩值。  
• 请勿让液体及其他异物进入本产品。  
• Los paneles laterales del producto pueden  
estar calientes. Esperar que el producto se  
enfríe antes de tocarlo.  
• Respetar las instrucciones de montaje, y en  
particular los pares de apretado.  
• I pannelli laterali dell'apparecchio possono  
scottare; lasciar quindi raffreddare il prodotto  
prima di toccarlo.  
• Seguire le istruzioni di montaggio corrette.  
• Non far entrare liquidi o oggetti estranei in questo  
apparecchio.  
• No dejar que penetren líquidos o cuerpos  
extraños en el producto.  
La mancata osservanza di questa precauzione può  
causare gravi rischi per l'incolumità personale o  
danni alle apparecchiature.  
如不能正确执行这些操作说明，  
极有可能造成严重人体伤害或者设备的损坏。  
Si no se respetan estas precauciones pueden  
producirse graves lesiones, daños materiales.  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
Datasheet  
ANNEX - ENVIROMENTAL INFORMATION  
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China  
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.  
Part  
Name  
Toxic or hazardous Substance and Elements  
Lead  
(Pb)  
Mercury  
(Hg)  
Cadmium  
(Cd)  
Hexavalent  
Chromium  
(Cr (VI))  
Polybrominated  
biphenyls  
(PBB)  
Polybrominated  
diphenyl ethers  
(PBDE)  
Semiconductor die  
Solder  
附件 - 环保信息  
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,  
电子信息产品污染控制标识要求。  
部件  
名称  
有毒有害物质或元素  
铅
(Pb)  
汞
(Hg)  
镉
(Cd)  
六价铬  
(Cr (VI))  
多溴联苯  
(PBB)  
多溴二苯醚  
(PBDE)  
半导体芯片  
焊接点  
50  
Do not forget to visit us at: www.crydom.com  
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明