首页 |元器件品牌

HA6090TKPGH [CRYDOM]

Trigger Output SSR,;
HA6090TKPGH
型号： HA6090TKPGH
厂家： CRYDOM INC.,    CRYDOM INC.,
描述：

Trigger Output SSR,
文件： 总7页 (文件大小：700K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Panel Mount  
DataSheet  
HA / HD60T Series  
• Ratings from 25A to 125A @ 48-660 VAC  
• SCR output for heavy industrial loads  
• AC or DC control  
• Direct bond copper substrate  
• Direct power lead frame  
• Epoxy free design  
• Zero turn-on or instantaneous turn-on outputs  
• UL/CSA/VDE Approved, CE Compliant to EN60950-1  
• Improved SEMS screw and washer  
• Redesigned housing with anti-rotation barriers  
For Generation 3 datasheet click here  
PRODUCT SELECTION  
Control Voltage  
3-32 VDC  
90-280 Vrms  
18-36 Vrms  
25A  
HD6025T  
HA6025T  
HA6025ET  
50A  
HD6050T  
HA6050T  
HA6050ET  
90A  
HD6090T  
HA6090T  
HA6090ET  
125A  
HD60125T  
HA60125T  
HA60125ET  
AVAILABLE OPTIONS  
Control Voltage  
A: 90-280 VAC  
Overvoltage Protection  
Thermal Pad  
Blank: Not Included  
H: Included  
Switching Type  
Blank: Zero Voltage Turn-On  
(7)  
D: 3-32 VDC  
AxxxxE: 18-36 VAC  
Blank: Not Included  
P: Included (6)  
Series  
-10: Instantaneous Turn-On  
H
T
-10  
H
A
E
K
P
G
60  
Operating  
Voltage  
25  
Rated Load Current  
Termination  
Input Status LED  
Trigger Circuit  
25: 25 Amps  
Blank: Screw  
Blank: Not Included  
T: Phototransistor  
60: 48-660 VAC 50: 50 Amps  
90: 90 Amps  
F: Quick Connect  
(Up to 50 Amps models)  
K: Hex standoffs (12)  
G: Included  
(5)  
125: 125 Amps  
Required for valid part number  
For options only and not required for valid part number  
* Not all part number combinations are available.  
Contact Crydom Technical Support for informacion on  
the availability of a specific part number.  
OUTPUT SPECIFICATIONS (1)  
Description  
Operating Voltage (47-63Hz) [Vrms]  
25A  
48-660  
1200  
5
500  
25  
50A  
48-660  
1200  
5
500  
50  
90A  
48-660  
1200  
5
500  
90  
125A  
48-660  
1200  
5
500  
Transient Overvoltage [Vpk]  
Maximum Off-State Leakage Current @ Rated Voltage [mArms]  
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]  
Maximum Load Current [Arms] (2)  
125  
Minimum Load Current [mArms]  
40  
40  
40  
150  
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]  
Maximum On-State Voltage Drop @ Rated Current [Vrms] (8)  
Thermal Resistance Junction to Case (Rjc) [°C/W]  
Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec]  
Minimum Power Factor (at Maximum Load)  
235/250  
1.15  
0.8  
285/259  
0.5  
597/625  
1.15  
0.45  
1770/1629  
0.5  
1145/1200  
1.15  
0.27  
6560/5976  
0.5  
1670/1750  
1.15  
0.22  
13950/12709  
0.5  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
INPUT SPECIFICATIONS(1)  
Description  
Control Voltage Range  
Minimum Turn-On Voltage  
Minimum Turn-Off Voltage  
Minimum Input Current  
Maximum Input Current  
Nominal Input Impedance  
Maximum Turn-On Time [msec]  
Maximum Turn-Off Time [msec]  
HD60xxT  
3-32 VDC  
HA60xxT  
90-280 Vrms  
90 Vrms  
10 Vrms  
-
HA60xxET  
18-36 Vrms  
18 Vrms  
4.0 Vrms  
-
(3)  
3.0 VDC  
1.0 VDC  
2 mA  
2 mA  
2 mA  
2.5 mA  
4.9 mA  
60K Ohm  
10  
4 mA  
9K Ohm  
10  
Current Regulated  
1/2 Cycle (4)  
1/2 Cycle  
40  
40  
GENERAL SPECIFICATIONS (1)  
Description  
Ambient Storage Temperature Range  
Dielectric Strength, Input/Output/Base (50/60Hz)  
Minimum Insulation Resistance (@ 500 VDC)  
Parameters  
-40 to 125 °C  
4000 Vrms  
109 Ohm  
Maximum Capacitance, Input/Output  
Ambient Operating Temperature Range  
Weight (typical)  
8 pF  
-40 to 80 °C  
2.6 oz (74.9 g)  
UL94 V-0  
Housing Material  
Baseplate Material  
Aluminum  
13-15 / 1.5-1.7  
18-20 / 2.0-2.2  
18-20 / 2.0-2.2  
Input Terminal Screw Torque Range [in-lbs/Nm]  
Load Terminal Screw Torque Range [in-lbs/Nm]  
SSR Mounting Screw Torque Range [in-lbs/Nm]  
Input/Load Terminal Screw Torque Range [in-lbs/Nm] (12)  
Humidity  
w/”K” option 8-10 / 0.9-1.13  
85% non-condensing  
LED Input Status Indicator  
w/”G” option (green)  
11,641,553 hours (1,328 years)  
MTBF (Mean Time Between Failures) at 40°C ambient temperature (13)  
7,210,376 hours (823 years)  
MTBF (Mean Time Between Failures) at 60°C ambient temperature (13)  
WIRING DIAGRAM  
AC  
Input Current vs Input Voltage  
“T” Option - High Voltage Output  
Recommended Wire Sizes  
V
Wire Size  
(Solid / Stranded)  
Wire Pull-Out  
Strength (lbs)[N]  
Terminals  
Input  
2.5  
2
(11)  
Load  
2 (  
24 AWG (0.2 mm2) / 0.2 [minimum]  
2 x 12 AWG (3.3 mm2) / 3.3 [maximum]  
20 AWG (0.5 mm2) / 0.518 [minimum]  
2 x 10 AWG (5.3 mm2) / 5.3  
10 [44.5]  
1 (  
)
)
90 [400]  
1.5  
1
30 [133]  
Output  
2
110 [490]  
90 [400]  
1
OUTPUT  
S O L I D S TAT E R E L AY  
2 x 8 AWG (8.4 mm2) / 8.4 [maximum]  
0.5  
0
4
INPUT  
3
0
5
10  
15  
20  
25  
30  
DC Input Voltage  
4 (– / )  
3 (+ / )  
EQUIVALENT CIRCUIT BLOCK DIAGRAMS  
Diagram: HD60xxT  
Diagram: HA60xxT  
1
2
AC  
AC  
4
4
3
1
2
-
DC  
AC  
AC  
AC  
AC  
AC/DC  
Converter  
Trigger  
Circuit  
Trigger  
Circuit  
(10)  
(10)  
(9)  
(9)  
+DC  
3
Current  
Limiter  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
MECHANICAL SPECIFICATIONS (1)  
Tolerances: 0.02 in / 0.5 mm  
All dimensions are in: inches [millimeters]  
(12)  
Screw Termination  
Hex Standoff Termination (“K” Option)  
1.1  
1.1  
Mounting  
0.89  
[22.6]  
[27.9]  
1.04  
[26.4]  
[27.9]  
Hole/Slot  
0.19 [4.9]  
DIA.  
Mounting  
0.49  
[12.4]  
0.49  
[12.4]  
Hole/Slot  
0.19 [4.9]  
DIA.  
2
1
OUTPUT  
2
1
OUTPUT  
S O L I D S TAT E R E L AY  
2.25  
[57.3]  
1.70  
[43.2]  
1.88  
[47.6]  
S O L I D S TAT E R E L AY  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
4
INPUT  
3
4
INPUT  
3
0.93  
[23.6]  
1.0  
1.0  
[25.4]  
[25.4]  
(4 places)  
1.75  
[44.5]  
1.75  
[44.5]  
1.0  
[25.4]  
(2 places)  
Quick Connect Termination (“F” Option) - Up to 25 Amp (5)  
Quick Connect Termination (“F” Option) - Up to 50 Amp (5)  
Faston Terminal(14)  
0.25 x 0.032  
1.58  
1.1  
1.31  
[33.4]  
1.31  
[33.4]  
Faston Terminal(14)  
0.25 x 0.032  
[40.2]  
[27.9]  
0.63  
Mounting  
Hole/Slot  
0.19 [4.9]  
DIA.  
Mounting  
Hole/Slot  
0.19 [4.9]  
DIA.  
(4 places)  
0.49  
[12.4]  
(2 places)  
[16.0]  
0.45  
[11.4]  
(2 places)  
2
1
OUTPUT  
2
1
OUTPUT  
S O L I D S TAT E R E L AY  
S O L I D S TAT E R E L AY  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
2.25  
[57.3]  
1.88  
[47.6]  
1.7  
[43.2]  
4
INPUT  
3
4
INPUT  
3
0.49  
1.40  
Faston Terminal(14)  
0.187 x 0.020  
[12.4]  
[35.6]  
Faston Terminal(14)  
0.187 x 0.020  
1.40  
[35.6]  
1.75  
1.25  
[31.8]  
1.75  
[44.5]  
1.25  
[31.8]  
(2 places)  
(2 places)  
[44.5]  
GENERAL NOTES  
(1) All parameters at 25°C unless otherwise specified.  
(2) Heat sinking required, see derating curves. For “K” option maximum current up to 50 Amp.  
(3) For relays with option “G” minimum control voltage is 4.5VDC.  
(4) Turn-on time for Instantaneous turn-on versions is 0.02 msec (DC Control Models).  
(5) Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs.  
(6) Output will self trigger between 900-1200Vpk, not suitable for capacitive loads.  
(7) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.  
(8) For 40mA minimum current, the voltage drop increases over maximum rated.  
(9) Elective Input Status LED, “G” option.  
(10) Elective Overvoltage Protection, “P” option.  
(11) Load can be wired to either SSR output terminal 1 or 2.  
(12) Option “K” is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB minimum thickness is 0.031 in)  
(13) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).  
(14) Mechanical dimensions vary from G3 models.  
For additional information or specific questions, contact Crydom Technical Support.  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
SURGE CURRENT INFORMATION  
25 A  
50 A  
250  
600  
500  
400  
300  
200  
100  
0
200  
150  
100  
50  
0
0.01  
0.1  
1
10  
0.01  
0.1  
1
10  
Surge Duration (Secs)  
Surge Duration (Secs)  
90 A  
125 A  
1200  
1050  
900  
750  
600  
450  
300  
150  
1800  
1600  
1400  
1200  
1000  
800  
600  
400  
200  
0
0
0.01  
0.1  
1
10  
0.01  
0.1  
1
10  
Surge Duration (Secs)  
Surge Duration (Secs)  
Non repetitive peak surge current at Tj initial 40ºC.  
THERMAL DERATE INFORMATION  
25 A  
50 A  
1.5ºC/W  
2ºC/W  
0.7ºC/W  
1ºC/W  
3ºC/W  
1.5ºC/W  
2ºC/W  
25  
20  
15  
10  
5
50  
40  
30  
20  
10  
0
0
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
90 A  
125 A  
0.5ºC/W  
0.7ºC/W  
0.5ºC/W  
1ºC/W  
1.5ºC/W  
0.7ºC/W  
1ºC/W  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
120  
100  
80  
60  
40  
20  
0
20  
30  
40  
50  
60  
70  
80  
20  
30  
40  
50  
60  
70  
80  
Ambient Temperature (ºC)  
Ambient Temperature (ºC)  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
AGENCY APPROVALS  
Designed in accordance with the requirements of IEC 62314  
IEC 61000-4-2 : Electrostatic Discharge – Level 3  
IEC 61000-4-4 : Electrically Fast Transients – Level 3  
IEC 61000-4-5 : Electrical Surges – Level 3  
IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz  
IEC 600068-2-27: Shock Resistance 15g/11ms  
E116949  
LR81689  
10143 UG  
Series 1 has Environmental Product declarations type III conforming to ISO 14025.  
ACCESORIES  
Recommended Accessories  
New Accessories!  
Protective Cover & Hardware Kits  
Protective Cover  
Part number: KS101  
Cover  
Hardware  
Kit  
Heat Sink  
Part No.  
Thermal Resistance Lug Terminal Thermal Pad  
[ºC/W]  
Clear plastic cover compatible with all new  
S1 designs. Safety covers provide added  
protection from electric shock when  
installing or checking equipment.  
5.0  
HS501DR  
KS101  
HK1  
HK4  
TRM1  
TRM6  
HSP-1  
HSP-2  
3.0  
HS301 / HS301DR  
HS251  
2.5  
2.0  
HS202 / HS202DR  
HS201 / HS201DR  
HS172  
2.0  
1.7  
Hardware Kit  
Part number: HK4  
HS151 / HS151DR  
HS122 / HS122DR  
HS103 / HS103DR  
HS101  
1.5  
Bag with 2 square brass accessories and 2  
screw 8-32 x 5/8 for output. Used to mount  
TMR1 lug terminals.  
1.2  
1.0  
1.0  
HS073  
0.7  
HS072  
0.7  
HS053  
0.5  
HS033  
0.36  
0.25  
HS023  
Rev. 103014  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险  
HAZARD OF  
ELECTRIC  
SHOCK,  
EXPLOSION,  
OR ARC FLASH.  
RIESGO DE  
DESCARGA  
ELECTRICA O  
EXPLOSION.  
RISQUE DE  
GEFAHR EINES  
ELEKTRISCHE  
N SCHLAGES  
ODER EINER  
EXPLOSION.  
RISCHIO DI  
SCOSSA  
ELETTRICA O  
DELL’ESPLOSI  
ONE.  
存在电击、  
爆炸或电弧  
闪烁危险  
DESCHARGE  
ELECTRIQUE  
OU EXPLOSION  
•
在操作此设  
备之前请先  
关闭电源。  
• Eteindre  
toutes les  
sources  
d'énergie de  
cet appareil  
avant de  
travailler  
dessus de cet  
appareil  
• Desconectar  
todos los  
suministros de  
energia a este  
equipo antes  
de trabajar  
• Disconnect all  
power before  
installing or  
working with  
this equipment.  
• Stellen Sie  
jeglichen  
Strom ab, der  
dieses Gerät  
versorgt, bevor  
Sie an dem  
• Spenga tutta  
l'alimentazion  
e che fornisce  
questa  
apparecchiatu  
ra prima del  
若不遵守这些说明，  
可能会导致严重的  
人身伤害甚至死亡。  
con este equipo.  
• Verify all  
connections  
and replace all  
covers before  
turning on  
Gerät Arbeiten  
durchführen  
lavorare a questa  
• Verificar todas  
las conexiones  
y colocar todas  
las tapas antes  
de energizer  
apparecchiatu ra  
• Vor dem  
Drehen auf  
Energie alle  
Anschlüsse  
überprüfen  
und alle  
• Verificare tutti  
i collegamenti  
e sostituire  
tutte le coperture  
prima della  
• Vérifier tous  
connections, et  
remettre tous  
couverts en  
olace avant de  
mettre sous  
power.  
el equipo.  
Failure to follow  
these  
instructions will  
result in death  
or serious injury.  
El  
rotazione  
sull'alimentazi one  
Abdeckungen  
ersetzen.  
incumplimiento  
de estas  
instrucciones  
puede provocar  
la muerte o  
lesiones serias.  
De non-suivi de  
ces instructions  
provoquera la  
mort ou des  
lésions sérieuses  
sérieuses.  
L'omissione di  
seguire queste  
istruz ioni  
provocherà la  
morte o di  
Unterlassung  
dieser  
Anweisungen  
können zum  
Tode oder zu  
schweren  
lesioni serie  
Verletzungen  
führen.  
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告  
RISQUE DE DOMMAGE MATERIEL ET DE  
SURCHAUFFE DU BOITIER  
GEFAHR VON MATERIALSCHÄDEN UND  
GEHÄUSEERHITZUNG  
RISK OF MATERIAL DAMAGE AND HOT  
ENCLOSURE  
• Les panneaux latéraux du produit peuvent être  
chauds. Laisser le produit refroidir avant de le  
toucher.  
• Respecter les consignes de montage, et  
notamment les couples de serrage.  
• Ne pas laisser pénétrer de liquide ni de corps  
étrangers à l'intérieur du produit.  
• Die Seitenwände können heiß sein. Lassen Sie  
das Produkt abkühlen, bevor Sie es berühren.  
• Beachten Sie die Montageanweisungen,  
• Führen Sie keine Flüssigkeiten oder  
• The product's side panels may be hot, allow  
the product to cool before touching.  
• Follow proper mounting instructions including  
torque values.  
• Do not allow liquids or foreign objects to enter  
this product.  
Fremdkörper in das Produkt ein.  
Le non-respect de cette directive peut entraîner,  
des lésions corporelles graves ou des  
dommages matériels.  
Die Nichtbeachtung dieser Anweisung kann  
Körperverletzung oder Materialschäden  
zur Folge haben.  
Failure to follow these instructions can result in  
serious injury, or equipment damage.  
RIESGO DE DAÑOS MATERIALES Y DE  
SOBRECALENTAMIENTO DE LA UNIDAD  
材料损坏和高温外壳的危险性  
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO  
CALDO  
• 产品的一侧面板可能很热，在其冷却前请  
 不要触碰。  
• 遵照正确的安装说明，包括扭矩值。  
• 请勿让液体及其他异物进入本产品。  
• Los paneles laterales del producto pueden  
estar calientes. Esperar que el producto se  
enfríe antes de tocarlo.  
• Respetar las instrucciones de montaje, y en  
particular los pares de apretado.  
• I pannelli laterali dell'apparecchio possono  
scottare; lasciar quindi raffreddare il prodotto  
prima di toccarlo.  
• Seguire le istruzioni di montaggio corrette.  
• Non far entrare liquidi o oggetti estranei in questo  
apparecchio.  
• No dejar que penetren líquidos o cuerpos  
extraños en el producto.  
La mancata osservanza di questa precauzione può  
causare gravi rischi per l'incolumità personale o  
danni alle apparecchiature.  
如不能正确执行这些操作说明，  
极有可能造成严重人体伤害或者设备的损坏。  
Si no se respetan estas precauciones pueden  
producirse graves lesiones, daños materiales.  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  
Panel Mount  
DataSheet  
ANNEX - ENVIROMENTAL INFORMATION  
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China  
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.  
Part  
Name  
Toxic or hazardous Substance and Elements  
Lead  
(Pb)  
Mercury  
(Hg)  
Cadmium  
(Cd)  
Hexavalent  
Chromium  
(Cr (VI))  
Polybrominated  
biphenyls  
(PBB)  
Polybrominated  
diphenyl ethers  
(PBDE)  
Semiconductor die  
Solder  
附件 - 环保信息  
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,  
电子信息产品污染控制标识要求。  
部件  
名称  
有毒有害物质或元素  
铅
(Pb)  
汞
(Hg)  
镉
(Cd)  
六价铬  
(Cr (VI))  
多溴联苯  
(PBB)  
多溴二苯醚  
(PBDE)  
半导体芯片  
焊接点  
50  
Do not forget to visit us at: www.crydom.com  
Copyright © 2014 Crydom Inc. Specifications subject to change without notice.  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明