407I12SFREQ3 [CTS]
Series - 3Rd Overtone Quartz Crystal, 48.001MHz Min, 50MHz Max, GREEN, CERAMIC, SURFACE MOUNT PACKAGE-4;型号: | 407I12SFREQ3 |
厂家: | CTS |
描述: | Series - 3Rd Overtone Quartz Crystal, 48.001MHz Min, 50MHz Max, GREEN, CERAMIC, SURFACE MOUNT PACKAGE-4 驱动 晶体 谐振器 |
文件: | 总3页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model 407
Surface Mount Quartz Crystal
FEATURES
• Standard 7.0x5.0mm Surface Mount Footprint
• Stable Frequency Over Temperature and
Drive Level
• Frequency Range 8 – 50 MHz
• Frequency Tolerance, ±30 ppm Standard
(±10 ppm and ±20 ppm available)
• Frequency Stability, ±50 ppm Standard
(±10,±20,±30 and ±40 ppm available)
• Operating Temperature to –40°C to +85°C
• Tape & Reel Packaging, EIA-481-2 Compliant
• RoHS/Green Compliant
DESCRIPTION
The Model 407 is a ceramic packaged Crystal
offering reduced size, ideal for high-density
circuit board applications. The Model 407 offers
reliable precision and excellent shock
performance in wireless telecommunication
devices.
ORDERING INFORMATION
407
M
OPERATING TEMPERATURE RANGE
FREQUENCY IN MHz
C = -20°C to +70°C (standard)
I = -40°C to +85°C
M - indicates MHz and decimal point.
Frequency is recorded with minimum 5
significant digits to the right of the "M".
FREQUENCY TOLERANCE @ 25°C
LOAD CAPACITANCE
1 = ± 10 ppm
2 = ± 20 ppm
3 = ± 30 ppm (standard)
A = 10 pF
B = 13 pF
C = 16 pF
D = 18 pF
E = 20 pF
F = 24 pF
G = 30 pF
H = 32 pF
J = 9 pF
K = 8 pF
L = 12 pF
S = Series
STABILITY TOLERANCE
Over Operating Temperature Range
(Referenced to 25°C Reading)
1 = ± 10 ppm **
2 = ± 20 ppm
3 = ± 30 ppm
4 = ± 40 ppm
5 = ± 50 ppm (standard)
Example Part Numbers:
407C35A14M31818
407I35A32M00000
** Limited to Standard Operating Temperature
Range Only, Code C.
Custom performance characteristics are available upon request. Use form C052 to
detail non-standard parameters.
Contact your local CTS Representative or CTS Customer Service for assistance.
Document No. 008-0261-0
Page 1 - 3
Rev. E
٠
٠
٠
CTS Electronic Components, Inc. ٠
171 Covington Drive ٠
Bloomingdale, IL 60108 ٠
٠
٠
٠
٠
٠
www.ctscorp.com ٠
٠
٠
Model 407
7.0x5.0mm Low Cost
Surface Mount Crystal
ELECTRICAL CHARACTERISTICS
PARAMETER
Operating Mode (Note 1)
Crystal Cut
VALUE
Fundamental or 3rd Overtone
AT-Cut
Frequency Range
8.0 MHz to 50.0 MHz
± 30 ppm Standard
(± 10 ppm and ± 20 ppm Available)
± 50 ppm Standard
Frequency Tolerance @ 25°C
Frequency Stability Tolerance
(Operating Temperature Range, Referenced to 25°C Reading)
(± 10 ppm, ± 20 ppm, ± 30 ppm and ± 40 ppm Available)
-20°C to +70°C Standard
(-40°C to +85°C Available)
-55°C to +125°C
Operating Temperature Range
Storage Temperature Range
Equivalent Series Resistance
See ESR Table
Load Capacitance or Resonance Mode
See Ordering Information
4.0 pF Maximum
(2.5 pF ± 0.5 pF Typical)
Shunt Capacitance (C0)
Drive Level
Reflow Condition, per JEDEC J-STD-020
25 µW Typical, 100 µW Maximum
+255°C ± 5°C, 10 Seconds Maximum
EQUIVALENT SERIES RESISTANCE TABLE
FREQUENCY RANGE
8.000 MHz - 15.999 MHz
16.000 MHz - 48.000 MHz
48.001 MHz - 50.000 MHz
MODE of OSCILLATION ESR Maximum
Fundamental
Fundamental
3rd Overtone
60 Ohms
40 Ohms
80 Ohms
Notes:
1. Third overtones as low as 30.000 MHz are available upon request.
MECHANICAL SPECIFICATIONS
PACKAGE DRAWING
MARKING INFORMATION
( 7.00 ±0.20 )
1. ** - Manufacturing Site Code.
2. YWW – Date Code, Y – Last Digit of Year,
WW – Week.
0.276 ±0.008
3. XXMXXXX – Frequency marked with 4
significant digits after the ‘M’.
4. Complete CTS part number, frequency value and
date code information must appear on reel and
box labels.
4
3
2
( 5.00 ±0.20 )
CTS ** YWW
● XXMXXXX
0.197 ±0.008
1
Top View
SUGGESTED SOLDER PAD GEOMETRY
( 1.20 )
Max
0.087 [2.20]
0.047
( MM )
Key:
Inch
( 4.6 )
0.181
( 1.2 )
0.047
0.055 [1.40]
4
1
3
2
( 1.0 )
0.039
1
4
2
3
( 2.54 )
0.100
0.100 [2.54]
Bottom View
Notes:
1. Termination pads (e4), barrier-plating is nickel (Ni) with gold (Au) flash plate.
2. Terminations #2, #4 and the metal lid are connected internally.
End user may connect these pins to circuit ground.
[mm]
Key:
0.252 [6.40]
Inch
Document No. 008-0261-0
Page 2 - 3
Rev. E
٠
٠
٠
CTS Electronic Components, Inc. ٠
171 Covington Drive ٠
Bloomingdale, IL 60108 ٠
٠
٠
Model 407
7.0x5.0mm Low Cost
Surface Mount Crystal
TAPE AND REEL INFORMATION
DIMENSIONS IN MILLIMETERS
17.5
2.0
Ø13.5
4.0
8.0
Ø1.50
1.75
16.0
1.95
120°
7.40
Ø180
Ø60
5.40
DIRECTION OF FEED
Ø21.4
Device quantity is 1,000 pieces per 180mm reel.
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle:
Mechanical Shock:
Sinusoidal Vibration:
Gross Leak:
400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1
minute transfer time between temperatures.
1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3
mutually perpendicular planes (18 total shocks).
0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles
each in 3 mutually perpendicular planes (9 times total).
No leak shall appear while immersed in an FC40 or equivalent liquid at
+125°C for 20 seconds.
Fine Leak:
Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.
Product must survive 3 reflows of +260°C peak, 10 seconds maximum.
2,000 hours at +125°C, disregarding frequency shift.
1,000 hours at +85°C, maximum ±5 ppm shift.
500M Ohms @ 100VDC ±15VDC.
Resistance to Solder Heat:
High Temperature Operating Bias:
Frequency Aging:
Insulation Resistance:
Moisture Sensitivity Level:
Level 1 per JEDEC J-STD-020.
QUALITY AND RELIABILITY
Quality systems meet or exceed the requirements of ISO 9000:2000 standards.
Document No. 008-0261-0
Page 3 - 3
Rev. E
٠
٠
٠
CTS Electronic Components, Inc. ٠
171 Covington Drive ٠
Bloomingdale, IL 60108 ٠
٠
٠
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明