536L13005IT5 [CTS]

Clipped Sine Output Oscillator,;
536L13005IT5
型号: 536L13005IT5
厂家: CTS    CTS
描述:

Clipped Sine Output Oscillator,

振荡器
文件: 总7页 (文件大小:444K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Model 536  
High Stability HCMOS TCXO  
Features  
. Fundamental Crystal Design  
. Frequency Range 10 – 54MHz *  
. Operating Voltage +3.3V  
Part Dimensions:  
5.0 × 3.2 × 2.0mm  
. Frequency Stability, Overall ±4.6ppm [-40°C to +85°C]  
. Operating Temperature Range to -40°C to +105°C  
. Voltage Control Option for Frequency Tuning [VCTCXO]  
. Enable Function Option Available  
. Tape and Reel Packaging, EIA-418  
Standard Frequencies  
* See Page 7 for common frequencies.  
Check with factory for availability of frequencies not listed.  
Applications  
. 5G, 4G, LTE  
. Autonomous Technologies  
. Stratum 3  
. Femtocells, RRU, BBU  
. Military Radio [Manpack]  
. Inflight Entertainment  
. Synchronous Ethernet  
. IP Networking  
. Medical Imaging  
. IEEE 1588 Timing  
. Wireless Communication  
. Test and Measurement  
Description  
CTS Model 536 is a high performance Temperature Compensated Crystal Oscillator [TCXO] suitable for  
applications requiring tight stability, Stratum 3 performance and more. Employing IC technology with HCMOS  
output and analog temperature compensation engine; coupled with a fundamental quartz crystal M536 has  
excellent stability and low jitter/phase noise performance.  
Ordering Information  
Model  
Frequency  
Output  
Enable  
Supply  
Voltage  
L
Temperature  
Frequency Code  
Frequency Tuning  
T
Packaging  
5
2
[MHz]  
Range  
I
Stability  
XXX  
X2  
536  
Function  
No Enable  
Enable, Pin 3  
Frequency  
Temp. Range  
-10°C to +70°C  
-40°C to +85°C  
-40°C to +105°C 3  
Packing  
500 pcs./reel  
Code  
Blank  
E
Code  
Code  
C
I
Code  
5
Product Frequency Code 1  
G
Voltage  
+3.3Vdc  
Stability  
±0.10ppm  
±0.28ppm  
±0.50ppm  
Frequency Deviation  
TCXO [No Voltage Control]  
±5ppm - ±10ppm [VCTCXO]  
Code  
L
Code  
01  
X2  
Code  
T
A
05  
Notes:  
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.  
Frequency vs. Temperature only.  
Available with stability code X2 and 05 only.  
2]  
3]  
Not all performance combinations and frequencies may be available.  
Contact your local CTS Representative or CTS Customer Service for availability.  
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this  
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.  
DOC# 008-0587-1 Rev. C  
Page 1 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Electrical Specifications  
Operating Conditions  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
-0.5  
-0.3  
3.14  
-
TYP  
MAX  
4.6  
UNIT  
V
Maximum Supply Voltage  
Maximum Control Voltage  
Supply Voltage  
VCC  
VC  
-
-
-
-
VCC  
V
VCC  
ICC  
CL  
±5%  
3.3  
-
3.47  
10  
V
Supply Current  
-
-
mA  
pF  
Output Load  
-
-
15  
-10  
-40  
-40  
-55  
+70  
+85  
+105  
+125  
Operating Temperature  
Storage Temperature  
TA  
-
-
+25  
-
°C  
°C  
TSTG  
Frequency Stability  
PARAMETER  
SYMBOL  
fO  
CONDITIONS  
MIN  
TYP  
MAX  
UNIT  
MHz  
10 - 40  
10 - 54  
Frequency Range  
Frequency stability ±0.10ppm  
Frequency stability ±0.28ppm or ±0.50ppm  
-10°C to +70°C & -40°C to +85°C  
Reference to fO, 20 Years Aging, -40°C to +85°C  
Initial Calibration @ +25°C, At Time of Shipment  
[fmax - fmin]/2, Over Temperature Range  
Supply Voltage, ±5%  
Frequency Stability  
Overall Frequency Stability  
Initial Calibration  
-4.6  
-1.0  
-
4.6  
1.0  
ppm  
ppm  
Δf/fO  
-
0.10, 0.28, 0.50  
Temperature Only  
Voltage Coefficient  
Load Coefficient  
±ppm  
Δf/f25  
-0.1  
-0.1  
-1.0  
-3.0  
-
-
-
-
0.1  
0.1  
1.0  
3.0  
ppm  
ppm  
Load, ±10%  
First Year @ +25°C, nominal VCC and VC  
20 Years @ +25°C, nominal VCC and VC  
-40°C to +105°C  
Aging  
Δf/f25  
Frequency Stability  
Overall Frequency Stability  
Initial Calibration  
Reference to fO, 20 Years Aging, -40°C to +105°C  
Initial Calibration @ +25°C, At Time of Shipment  
[fmax - fmin]/2, Over Temperature Range  
Supply Voltage, ±5%  
-4.7  
-0.9  
-
4.7  
0.9  
ppm  
ppm  
Δf/fO  
-
0.28, 0.5  
Temperature Only  
Voltage Coefficient  
Load Coefficient  
±ppm  
Δf/f25  
-0.1  
-0.2  
-1.0  
-3.0  
-
-
-
-
0.1  
0.2  
1.0  
3.0  
ppm  
ppm  
Load, ±10%  
First Year @ +25°C, nominal VCC and VC  
20 Years @ +25°C, nominal VCC and VC  
Aging  
Δf/f25  
DOC# 008-0587-1 Rev. C  
Page 2 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Electrical Specifications  
Output Parameters  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
TYP  
MAX  
UNIT  
-
HCMOS  
Output Type  
-
-
VOH  
VOL  
Logic '1' Level, CMOS Load  
Logic '0' Level, CMOS Load  
@ 50% Level, output waveform  
@ 10%/90% Levels, output waveform  
Application of VCC  
0.9VCC  
-
-
-
0.1VCC  
55  
Output Voltage Levels  
V
-
45  
-
Output Duty Cycle  
Rise and Fall Time  
Start Up Time  
SYM  
TR, TF  
TS  
-
%
ns  
ms  
-
8
-
2
5
Enable Function  
Enable Input Voltage  
Disable Input Voltage  
Disable Current  
Enable Time  
VIH  
VIL  
IDIS  
TPLZ  
-
Pin 8 Logic '1', Output Enabled  
Pin 8 Logic '0', Output Disabled  
Pin 8 Logic '0', Output Disabled  
Pin 8 Logic '1'  
0.8VCC  
-
-
-
-
-
-
V
V
-
-
-
-
0.2VCC  
3.5  
5
mA  
ms  
-
Phase Noise  
See Typical Plots  
-
Control Voltage  
PARAMETER  
SYMBOL  
VC  
CONDITIONS  
VCC = 3.3V  
MIN  
0.0  
TYP  
1.65  
MAX  
3.3  
UNIT  
V
Control Voltage  
Frequency Tuning  
[VCTCXO Only]  
Δf/fO  
Specified VC Range  
±5 to ±10  
ppm  
Input Impedance  
ZVc  
-
100  
-
-
-
kOhms  
Linearity  
L
-
Best Straight Line Fit  
-
±5  
±10  
%
-
Positive  
Transfer Function  
Test Circuit  
HCMOS  
DOC# 008-0587-1 Rev. C  
Page 3 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Electrical Specifications  
Performance Data  
Phase Noise [typical]  
50MHz, VCC = 3.3V, TA = +25°C  
DOC# 008-0587-1 Rev. C  
Page 4 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Mechanical Specifications  
Package Drawing  
Marking Information  
1. xxxx – Frequency Code, 4-digits. See Page 7.  
2. – Pin 1 Identifier.  
xxxx  
**YM  
3. ** – Manufacturing Site Code.  
4. YM – Date Code; Y – year [last digit], M – month.  
[See Table I for month codes.]  
5.  
– Area for Crystal Lot Code or Date Code.  
Recommended Pad Layout  
Notes  
1. DO NOT make connections to non-labeled pins or  
castellations as they may have internal  
connections used in the manufacturing process.  
2. JEDEC termination code (e4). Barrier-plating is  
nickel [Ni] with gold [Au] flash plate.  
3. Reflow conditions per JEDEC J-STD-020; +260°C  
maximum, 10 seconds.  
4. MSL = 3.  
Pin Assignments  
Pin  
Symbol  
Function  
Voltage Control Note 1  
Do Not Connect  
Enable, Pin 3 [Optional] Note 2  
Circuit & Package  
Do Not Connect  
HCMOS  
1
Vc  
2
-
3
EOH  
4
GND  
5
-
6
Output  
7
-
-
Vcfilter  
8
Do Not Connect  
Supply Voltage  
9
VCC  
-
10  
Do Not Connect  
Notes  
1. Do not connect to Pin 1, if Voltage Control function is not used [TCXO].  
2. Do not connect to Pin 3, if Output Enable function is not used.  
3. Add 0.1µF capacitor between Pin 7 and ground.  
Table I - Month Code  
1
JAN  
1
2
3
4
5
6
7
JUL  
7
8
AUG  
8
9
SEP  
9
10  
11  
12  
MONTH  
FEB MAR APR MAY JUN  
2
OCT NOV DEC  
X
MONTH CODE  
3
4
5
6
Y
Z
DOC# 008-0587-1 Rev. C  
Page 5 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Packaging - Tape and Reel  
Tape Drawing  
Reel Drawing  
Notes  
1. Device quantity is 500 pieces maximum per 180mm reel.  
2. Complete CTS part number, frequency value and date code information must appear on reel and carton labels.  
DOC# 008-0587-1 Rev. C  
Page 6 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
Model 536  
High Stability HCMOS TCXO  
Addendum  
Available Frequencies for Stability ±0.50ppm – MHz  
ORDERING  
CODE  
100  
MARKING  
CODE  
1000  
ORDERING  
CODE  
24C  
MARKING  
CODE  
2457  
2500  
2600  
ORDERING  
CODE  
388  
MARKING  
CODE  
3888  
4000  
5000  
FREQUENCY  
FREQUENCY  
FREQUENCY  
10.000000  
12.800000  
13.000000  
19.200000  
20.000000  
24.576000  
25.000000  
26.000000  
30.720000  
32.000000  
38.880000  
40.000000  
50.000000  
54.000000  
128  
130  
192  
200  
1280  
1300  
1920  
2000  
250  
260  
307  
320  
400  
500  
540  
3072  
3200  
5400  
Available Frequencies for Stability ±0.28ppm – MHz  
ORDERING  
CODE  
100  
MARKING  
CODE  
1000  
ORDERING  
CODE  
24C  
MARKING  
CODE  
2457  
2500  
2600  
ORDERING  
CODE  
388  
MARKING  
CODE  
3888  
FREQUENCY  
FREQUENCY  
FREQUENCY  
10.000000  
12.800000  
13.000000  
19.200000  
20.000000  
24.576000  
25.000000  
26.000000  
30.720000  
32.000000  
38.880000  
40.000000  
128  
130  
192  
200  
1280  
1300  
1920  
2000  
250  
260  
307  
320  
400  
4000  
3072  
3200  
Available Frequencies for Stability ±0.10ppm – MHz  
ORDERING  
CODE  
100  
MARKING  
CODE  
1000  
ORDERING  
CODE  
MARKING  
CODE  
ORDERING  
CODE  
MARKING  
CODE  
FREQUENCY  
FREQUENCY  
FREQUENCY  
10.000000  
20.000000  
24.576000  
25.000000  
30.720000  
200  
24C  
250  
307  
2000  
2457  
2500  
3072  
DOC# 008-0587-1 Rev. C  
Page 7 of 7  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY