SA254192F17NGR [CTS]

Parallel - Fundamental Quartz Crystal, 19.2MHz Nom,;
SA254192F17NGR
型号: SA254192F17NGR
厂家: CTS    CTS
描述:

Parallel - Fundamental Quartz Crystal, 19.2MHz Nom,

驱动 晶体 谐振器
文件: 总5页 (文件大小:305K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SA254 Series  
Automotive Grade Quartz Crystal  
Features  
. AEC-Q200 Compliant  
. Hermetic Ceramic Surface Mount Package  
. Fundamental Crystal Design  
. Frequency Range 12 – 80MHz  
. Frequency Tolerance, ±30ppm Standard  
. Frequency Stability, ±50ppm Standard  
. Operating Temperature Range to -55°C to +125°C  
. Tape and Reel Packaging, EIA-418  
Part Dimensions:  
2.5 × 2.0 × 0.65mm 9.37mg  
Standard Frequencies – see Page 5 for developed frequencies.  
* Check with factory for availability of frequencies not listed.  
Applications  
. Automotive Electronics  
. Internet of Things [IoT, IIot]  
. Microcontrollers and FPGAs  
. Wireless Communication  
. Ethernet/GbE/SyncE  
. Medical Electronics  
. Commercial Military & Aerospace  
. Mobile Multimedia/Infotainment  
. Car Navigation Systems  
Description  
CTS Model SA254 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate  
over extended temperature ranges for use in automotive electronics.  
Ordering Information  
Model  
Frequency Code  
[MHz]  
Mode of  
Oscillation  
F
Tolerance  
@ +25°C  
3
Temperature  
Stability  
5
Temperature  
Load  
Capacitance  
A
Packaging  
R
Range  
G
SA254  
XXX  
Frequency  
Tolerance  
±10ppm  
±15ppm  
±20ppm  
±30ppm  
±50ppm  
Temp. Range  
Packing  
3k pcs./reel  
Code  
Code  
Code  
I
G
H
N
P
Code  
R
-40°C to +85°C 2  
-40°C to +105°C 3  
-40°C to +125°C 4  
-40°C to +150°C 5  
-55°C to +105°C 5  
-55°C to +125°C 5  
1
X
2
3
5
Product Frequency Code 1  
M
Mode  
Fundamental  
Stability  
±15ppm  
±20ppm  
±30ppm  
±50ppm  
±100ppm  
±150ppm  
Capacitance  
7pF  
Capacitance  
16pF  
18pF  
20pF  
24pF  
Code  
F
Code  
Code  
Code  
X
2
3
5
6
7
V
K
J
A
L
C
D
E
F
G
S
8pF  
9pF  
10pF  
12pF  
13pF  
30pF  
Series  
B
Notes:  
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.  
2] Available with all stability codes.  
3] Available with stability codes 3, 5, 6 and 7.  
4] Available with stability codes 5, 6 and 7.  
5] Stability codes 6 and 7. Contact factory for code 5 availability.  
Not all performance combinations and frequencies may be available.  
Contact your local CTS Representative or CTS Customer Service for availability.  
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this  
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.  
DOC# 008-0583-0 Rev. B  
Page 1 of 5  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
SA254 Series  
Automotive Grade Quartz Crystal  
Electrical Specifications  
Operating Conditions  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
-40  
-40  
-40  
-40  
-55  
-55  
-55  
TYP  
+25  
-
MAX  
+85  
UNIT  
°C  
+105  
+125  
+150  
+105  
+125  
+125  
Operating Temperature  
TA  
-
-
Storage Temperature  
TSTG  
°C  
Frequency Stability  
PARAMETER  
SYMBOL  
fO  
CONDITIONS  
Fundamental mode  
@ +25°C  
MIN  
TYP  
12 - 80  
MAX  
UNIT  
MHz  
Frequency Range  
Frequency Tolerance  
Frequency Stability  
Aging  
10, 15, 20, 30 or 50  
Δf/fO  
Δf/f25  
Δf/f0  
±ppm  
±ppm  
ppm  
15, 20, 30, 50, 100 or 150  
Referenced to +25°C reading  
Typical per year @ +25°C  
-3  
-
3
Crystal Parameters  
PARAMETER  
SYMBOL  
CONDITIONS  
MIN  
TYP  
MAX  
UNIT  
Fundamental  
AT-Cut Strip  
Operating Mode  
Crystal Cut  
-
-
-
-
-
-
-
-
See Ordering Information  
Load Capacitance  
Shunt Capacitance  
Series Resistance  
CL  
C0  
pF  
pF  
-
-
3.0  
12MHz - <16MHz  
16MHz - <20MHz  
20MHz - <30MHz  
30MHz - 80MHz  
-
-
-
-
180  
150  
80  
-
Fundamental  
R1  
Ω
-
-
-
-
-
60  
Drive Level  
DL  
Ri  
10  
-
200  
-
µW  
Insulation Resistance  
+100Vdc ±15Vdc  
500  
MΩ  
Δf/f0 - Frequency deviation referenced to nominal frequency.  
Δf/f25 - Frequency deviation over operating temperature range, referenced to +25°C frequency.  
DOC# 008-0583-0 Rev. B  
Page 2 of 5  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
SA254 Series  
Automotive Grade Quartz Crystal  
Mechanical Specifications  
Package Drawing  
Marking Information  
1. SA254 – CTS model.  
2. C – CTS.  
2. D – Date Code. See Table I for codes.  
3. xxx – Frequency Code.  
3-digits, frequencies below 100MHz  
[See document 016-1454-0, Frequency Code Tables.]  
SA254  
CDxxx  
Recommended Pad Layout  
Notes  
1. JEDEC termination code (e4). Barrier-plating is  
nickel [Ni] with gold [Au] flash plate.  
2. Reflow conditions per JEDEC J-STD-020; +260°C  
maximum, 20 seconds.  
3. Due to package variability, the pad chamfer on the  
bottom could be located on Pin 1 or Pin 2 in a  
given lot. Layout orientation should be based on  
the top view [marking side], as indicated in  
package drawing. The chamfer location does not  
affect the electrical performance of the device.  
4. MSL = 1.  
Table I – Date Code  
DOC# 008-0583-0 Rev. B  
Page 3 of 5  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
SA254 Series  
Automotive Grade Quartz Crystal  
Packaging – Tape and Reel  
Tape Drawing  
Reel Drawing  
Notes  
1. Device quantity is 1k pieces minimum and 3k pieces maximum per 180mm reel.  
2. Complete CTS part number, frequency value, date code and manufacturing site code information must appear  
on reel and carton labels.  
DOC# 008-0583-0 Rev. B  
Page 4 of 5  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  
SA254 Series  
Automotive Grade Quartz Crystal  
Addendum  
Common Frequencies and Frequency Codes – MHz  
Common Wireless Frequencies  
Additional Frequencies  
FREQUENCY  
FREQUENCY  
FREQUENCY  
FREQUENCY  
FREQUENCY  
CODE  
FREQUENCY  
FREQUENCY  
FREQUENCY  
CODE  
CODE  
CODE  
12.000000  
13.560000  
16.000000  
19.200000  
20.000000  
24.000000  
25.000000  
26.000000  
27.120000  
30.000000  
32.000000  
37.400000  
38.400000  
40.000000  
48.000000  
52.000000  
120  
13C  
160  
192  
200  
240  
250  
260  
271  
300  
320  
374  
384  
400  
480  
520  
14.318180  
16.367600  
16.384000  
16.666700  
16.800000  
16.934400  
18.000000  
18.432000  
19.440000  
19.660800  
19.680000  
20.480000  
20.736000  
22.118400  
22.579200  
24.305000  
24.545400  
24.545454  
24.553500  
24.576000  
143  
25.000625  
26.041660  
27.000000  
28.224000  
28.322000  
28.375000  
28.636360  
29.491200  
30.400000  
30.720000  
31.250000  
32.768000  
33.000000  
33.330000  
33.333000  
33.333300  
33.868800  
35.328000  
36.000000  
38.000000  
25A  
38.880000  
39.062500  
41.600000  
44.000000  
45.000000  
49.152000  
50.000000  
54.000000  
388  
39A  
41C  
440  
450  
491  
500  
540  
16E  
163  
16N  
168  
169  
180  
184  
194  
19B  
196  
204  
207  
221  
225  
243  
24F  
24G  
24B  
24C  
26F  
270  
282  
28C  
283  
286  
29B  
304  
307  
312  
327  
330  
333  
33E  
33A  
338  
353  
360  
380  
DOC# 008-0583-0 Rev. B  
Page 5 of 5  
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test  
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY