CWR-183-25-0000 [CWIND]

D Type Connector, 25 Contact(s), Female, 0.108 inch Pitch, IDC Terminal, Hole .115-.125, Plug,;


型号：	CWR-183-25-0000
厂家：	CW INDUSTRIES
描述：	D Type Connector, 25 Contact(s), Female, 0.108 inch Pitch, IDC Terminal, Hole .115-.125, Plug, 连接器
文件：	总4页 (文件大小：174K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

D-Subm iniature Connector s–All-P lastic

The D-Subminiature Insulation Displacement Connector is

a popular standard for interconnecting many types of electronic

equipment–computers and peripherals, instruments, tele-

communications and test equipment–throughout the military,

industrial, and commercial product sectors.

CW’s D-Subminiature connectors consist of four sizes of

each of two types of D-Subminiature connectors…pin and

socket versions…mating to standard 9, 15, 25, and 37

conductor cable. All CW D-Subminiature connectors incorporate

two basic series of patents assuring contact integrity with the

cable as well as the mating connector. These connectors are UL

and CSA listed and are designed to meet the standards of Mil-

DTL-83503. They are fully interchangeable and mate with other

standard D-Subminiature connectors.

• Accepts jacketed and

shielded cable without the

need for a backshell.

• Choice of 3-way strain

relief-cable entry/exit (left,

right, or center) provides

maximum flexibility in

system design.

• Available with or without

protective cover lip for cable

end or daisy chain applications.

• Accepts standard .050 in.

center cable. Internal contact

transition to .054 in. centers

eliminates the need for special

cable preparation.

• Torq-Tite™ contact tines

keep the conductor under

continuous tension. Assures a

mechanically and electrically

sound, gas-tight union.

• Contacts are precisely positioned

and parallel for their full mating depth,

providing maximum contact area on

every pin and socket.

• Integral guides precisely

orient the cable to the connector

tines. Eliminates the need for special

cable alignment tools.

• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com

Contact

D-Subminiature Features

• Offset, tine design

produces Torq-Tite™

termination for added

reliability

• 9-, 15-, 25-, 37- pin or socket versions available

• Interchangeable and mateable with other D’s

• UL, CSA listed

• Contact tines are firmly

connected to the body of

the contact

• Patented 0.050/0.054 in. (1.27/1.38mm) cable/connector

transition

• Fully mating, precisely positioned contacts

• Patented off-set contact tines assure gas-tight connection

• Rugged, lightweight UL 94 V-O thermoplastic construction

• No exposed metal

• Three transition angles

allow mating pins to be

parallel to each other and

seated at equivalent

depths in the insulator

• Positive polarization via D-shaped contact shroud

• All contacts numbered

• Patented transition

design eliminates

internal stress on contact

as .050 in. cable centers

are translated to .054 in.

D-Subminiature centers

• Accepts 28 AWG solid or stranded and 30 AWG solid

conductors in both shielded and unshielded flat cables

• Positive, fast termination. No special assembly tooling

required

• Simple, non-destructive removal of covers

• Three strain relief options available

• Easily daisy chained

• Bifurcated barrel

contact provides for

redundant contact with

mating pin

• Hardware for a variety of mounting methods available

Socket

Contact

• Rounded tip provides

lead-in for mating with

socket contact

• Jackscrew design (CWN-HK-01) accepts a standard

miniature banana plug for grounding

• Manufactured under U.S. patent 3,990,767.

Patented Contact Transition

The CW contact transition is unique in that all contacts are precisely

positioned to provide full contact with their mating member at every pin

and socket. CW’s internal transition from .050 in. to .054 in. centers

eliminates the need for special cables or special cable preparation. It

also eliminates the possibility of pin misalignment, and excessive

insertion/withdrawal forces, providing maximum contact integrity,

minimum contact resistance, and long term reliability.

Three-way Strain Relief

CW’s exclusive design allows for three-way strain relief. This feature

offers you a choice of three cable entry/exit options providing maximum

flexibility and system design.

Assembly That’s a Snap

CW supplies a cover factory preassembled to the base, with the cover in

a detented “up” position to allow sufficient space to insert the cable.

There is no need for special cable alignment tooling. Built-in guides in

both the cover and base orient the cable conductors to the connector

contacts.

Removable Cover

CW insulation displacement D-Subminiature connectors permit simple,

non-destructive removal of the cover for maintenance and connector

reuse–the open end of a paper clip and a special groove in the mounting

flange (standard on all CW D’s) is all that is required to remove the cover.

• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com 19

D-Subm in iatur e–All-P lastic

This Cover Lip Omitted for Connectors

.125

DIA. 2 HOLES

used in Daisy Chain applications.

.116 RAD.

Engineering Dimensions

(3.18)

(2.95) TYP.

.53

(13.5)

.49

(12.5)

Socket D Connector

TOP SLOT, CABLE EXIT

SIDE CUTOUT,

CABLE EXIT

TOP VIEW WITH STRAIN RELIEF COVER

COVER (PLAIN)

TOP VIEW WITH PLAIN COVER

COVER (PLAIN)

CONNECTOR DIMENSIONS

.13

OPEN POSITION

(3.3)

.10

REF.

NO.

CONTS.

(2.5)

COVER

(STRAIN RELIEF)

.984

.434

.640

COVER (PLAIN)

CLOSED POSITION

ON CABLE

.14

(3.6)

1.04

(26.4)

BASE

(24.99) (11.02) (16.26)

1.312

.760

.966

.19

TAIL PLUG

CONTACT

(4.8)

(33.32) (19.30) (24.54)

1.852 1.303 1.510

(47.04) (33.10) (38.35)

2.500 1.955 2.162

(63.50) (49.66) (54.91)

.23

(5.8)

END VIEW WITH

STRAIN RELIEF COVER

END VIEW WITH

PLAIN COVER

.054

(1.37)

.048

TYP.

DIA. TYP.

.31

(1.22)

(7.9)

25 Contact Connector Shown

.112

(2.84)

10º TYP.

This Cover Lip Omitted for Connectors

used in Daisy Chain applications.

.125

DIA. 2 HOLES

(3.18)

.116 RAD.

(2.95) TYP.

.53

(13.5)

.49

(12.5)

Pin D Connector

TOP SLOT, CABLE EXIT

SIDE CUTOUT,

CABLE EXIT

TOP VIEW WITH STRAIN RELIEF COVER

COVER (PLAIN)

TOP VIEW WITH PLAIN COVER

.10

COVER (PLAIN)

OPEN POSITION

CONNECTOR DIMENSIONS

NO.

.13

(3.3)

REF.

(2.5)

COVER

(STRAIN RELIEF)

CONTS.

.984

.434

.660

COVER (PLAIN)

CLOSED POSITION

ON CABLE

.14

(3.6)

1.04

(26.4)

BASE

(24.99) (11.02) (16.76)

1.312

.760

.986

.19

TAIL PLUG

CONTACT

(4.8)

(33.32) (19.30) (25.04)

1.852 1.303 1.530

(47.04) (33.10) (38.86)

2.500 1.955 2.182

(63.50) (49.66) (55.42)

.23

(5.8)

END VIEW WITH

STRAIN RELIEF COVER

END VIEW WITH

PLAIN COVER

.054

(1.37)

.040

TYP.

DIA. TYP.

.33

(1.02)

(8.4)

25 Contact Connector Shown

.112

(2.84)

10º TYP.

Hardware Mounting Kits for All-Plastic D-Connectors

HARDWARE

SCREW

C-06-08

CWN-HK-05

To order, specify CWN-HK-XX.

Two 4-40 threaded

FILISTER

SCREW

C-09-01

CWN-HK-01

CWN-HK-03

jack screws and

thread press-fit

inserts* for midspan

cable splices.

*requires connector

mounting holes

enlarged to .150”.

THREADED

INSERT

C-28-02

Two 4-40 threaded

jack screws and

retaining rings for

midspan splices.

For midspan splices

or panel mounting

with 2-56 hardware.

LOCK

WASHER

G-07-06-04

HEX NUT

C-28-03

STAND-OFF

C-83-03

JACK

SCREW

C-84-01

JACK

SCREW

C-84-03

STANDOFF

C-83-09

LOCK

WASHER

G-07-06-01

FLAT

WASHER

G-07-05-02

JACK

SCREW

C-84-04

LOCK

WASHER

G-07-06-04

THREADED

INSERT

C-28-02

LOCK

WASHER

G-07-06-04

RETAINING

RING

C-36-01

Threaded

Insert

C-28-09

HEX NUT

C-28-01

RETAINING

RING

C-36-01

HEX NUT

C-28-01

CWN-HK-06

Two 2-56 threaded

screws, four

threaded press-fit

inserts, two hex nuts

and lock washers

for economical

STAND-OFF

C-83-01

CWN-HK-04

Two 4-40 threaded

jack sockets, lock

washers and hex

nuts for midspan

splices or panel

mounting.

CWN-HK-02

LOCK

WASHER

G-07-06-01

For midspan splices

with metal-shell

D connectors using

4-40 hardware.

FILISTER

SCREW

C-09-03

midspan splices.

• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com

Specifications and Ordering Information

Specifications

• Contacts: phosphor bronze standard

• Withdrawal force 2-8 oz/contact, typical

• Color: blue

• Contact Plating: 30µ in. gold (in mating area) over 50µ in.

nickel, standard; 10µ in. gold (in mating area) over 50µ in.

nickel, optional; 50µ in. gold (in mating area) over 50µ in.

nickel, optional; 100µ in. 60/40 tin-lead, optional

• Operating temperature: -55º to +125ºC

• Current 1A(maximum) per contact

• Dielectric Withstand Voltage: 500 Vdc (sea level)

• Insulation resistance: 5 x 10⁹ohms

• Insulator material: UL 94V-0 flame - retardant thermoplastic

• Cover pull-off force 8 oz/contact minimum (force applied

along contacts’ primary axes)

• Strain Relief Cover: standard

How to Order All-Plastic D-Subminiature Connectors

Type of Connector

182=D-Subminiature for cable end

CWR-XXX-XX-00XX

terminations, pin contact

(Standard)

183=D-Subminiature for cable end

Plating

0021=30µ in. gold (in mating

terminations, socket contact

(Standard)

180=D-Subminiature connector for

daisy chain applications, pin

contact

181=D-Subminiature connector for

daisy chain applications, socket

contact

area) over 50µ in. nickel

(standard)

0000=10µ in. gold (in mating

area) over 50µ in. nickel

0055=50µ in. gold (in mating

area) over 50µ in. nickel

0003=100µ in. tin-lead

Number of Contacts

(9, 15, 25, 37)

How to Order D-Subminiature Cable Assemblies

Cable assemblies with two D-Subminiature connectors on a prescribed length of color-coded cable are available with

the connectors oriented per drawings 19-1, 19-2, or 19-3 (#1 contacts oriented to brown conductor.) For other lengths,

orientations, numbers or combinations of connectors, contact the factory or your local value-added distributor.

BROWN (N0. 1 cond.)

DRAWING 19-1

BROWN (N0. 1 cond.)

DRAWING 19-2

BROWN (N0. 1 cond.)

DRAWING 19-3

"L"

CA-XX-9X0X

Number of Conductors

(9, 15, 25, 37)

Final assembly length “L”

1=3”+1/8”

2=6”+1/8”

3=12”+1/4”

4=24”+1/4”

Type of Connectors

6=Two D-Subminiature connectors with

pin contacts, CWR-182-XX-0021

(see drawing 19-1)

7=Two D-Subminiature connectors with

socket contacts, CWR-183-XX-0021

(see drawing 19-2)

5=48”+1/4”

8=A D-Subminiature connector with

pin contacts. CWR-182-XX-0021,

on one end and a D-Subminiature

connector with socket contacts.

CWR-183-XX-0021, on the other

end (see drawing19-3)

• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com 21

CWR-183-25-0000 [CWIND]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E