DS9490B [DALLAS]

USB to 1-Wire/iButton Adapter; USB至1-Wire / iButton的适配器
DS9490B
型号: DS9490B
厂家: DALLAS SEMICONDUCTOR    DALLAS SEMICONDUCTOR
描述:

USB to 1-Wire/iButton Adapter
USB至1-Wire / iButton的适配器

文件: 总5页 (文件大小:210K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DS9490R/DS9490B  
USB to 1-Wire/iButton Adapter  
www.maxim-ic.com  
FEATURES  
TYPICAL OPERATING CIRCUIT  
C High-Speed 12Mbps Universal Serial Bus  
(USB) Interface  
C Supports Standard and Overdrive 1-Wire®  
Communication  
USB  
USB  
PC  
PC  
DS9490B  
DS9490R  
iButton  
C Slew-Rate-Controlled 1-Wire Timing and  
Active Pullup for Improved 1-Wire Network  
Performance  
C DS9490R has an RJ11 Interface for Standard  
Connectivity Accessories such as the  
DS1402D-DR8  
C DS9490B has an iButton® Interface and  
Retains a Fixed iButton  
DS1402D-DR8  
C Built-In Custom DS2401 Identification Chip  
C Reads all 1-Wire and iButton Devices. Writes  
All Except EPROM 1-Wire/iButton Devices  
APPLICATIONS  
C Software Authorization—Protection against  
software piracy by tying software operation to  
the presence of iButton hardware.  
ORDERING INFORMATION  
PART  
DESCRIPTION  
USB Single F5 iButton Holder  
with Protective Cap  
C iButton Initialization and Download—  
Loggers like the Thermochron® can be  
missioned and downloaded. Monetary  
iButtons can be refilled with money.  
C Demonstration—Demonstrate the features of  
iButtons or 1-Wire chips on personal  
computers.  
DS9490B  
DS9490R  
USB to 1-Wire RJ11  
PACKAGING/SHIPPING  
INFORMATION  
The part is shipped individually in an anti-static  
bag.  
C Development—Aid development of 1-Wire  
applications by providing a PC interface to  
verify device contents and state.  
DESCRIPTION  
The DS9490B is a USB bridge and holder for a single F5-size iButton. The iButton is securely held  
behind a latched door. The DS9490R is a USB bridge with 1-Wire RJ11 interface to accommodate 1-  
Wire receptacles and networks. The DS1402D-DR8 (Blue Dot™) can readily be used in conjunction with  
the DS9490R to create an iButton PC reader. Both adapters are based on the DS2490 USB to 1-Wire  
bridge chip.  
PC software drivers for Windows® 98, Windows 2000, Windows ME, and Windows XP can be found on  
the iButton website under software support at: http://www.ibutton.com/software/tmex/index.html  
1-Wire, iButton, and Thermochron are registered trademarks of  
1 of 5  
050503  
Dallas Semiconductor.  
Blue Dot is a trademark of Dallas Semiconductor.  
Windows is a registered trademark of Micosoft Corp.  
DS9490  
Figure 1. DS9490R  
* Color subject to change  
Figure 2. DS9490B  
* Color subject to change  
*
*Note: To eject an iButton, insert a straightened paper clip into the side access hole of the DS9490B.  
Push the paper clip in the direction of the iButton. A different iButton can then be inserted. The  
data contact faces down and away from the embossed ‘i’. Before inserting the paper clip  
disconnect the DS9490B from the USB bus.  
Each USB bridge contains a unique built-in identification chip. The identification chip is a custom  
DS2401 that is a 64-bit ID number (see Figure 3).  
Figure 3. DS2401 ID CHIP 64-BIT LASERED ROM  
MSB  
LSB  
12-BIT  
FIXED  
(000H)  
36-BIT SERIAL  
NUMBER  
8-BIT  
CRC CODE  
8-BIT FAMILY  
CODE (81H)  
MSB LSB  
MSB  
LSB MSB  
LSB MSB LSB  
2 of 5  
DS9490  
PIN CONFIGURATION  
Figure 4. 1-WIRE RJ11 SOCKET FOR DS9490R  
SIGNAL  
PIN  
DESCRIPTION  
NAME  
VDD  
5VDC Output  
Power Ground  
1-Wire Data  
1-Wire Return  
No Connection  
No Connection  
1
2
GND  
6
5
4
3
2
1
OW  
3
GND_OW  
N.C.  
4
Looking into Female RJ11  
5, 6  
6
N.C.  
Figure 5. iBUTTON SOCKET FOR DS9490B  
SIGNAL  
PIN  
DESCRIPTION  
NAME  
OW  
GND_OW  
1-Wire Data  
1-Wire Return  
1
2
2
*
1
*Note: The data contact faces down and away from the embossed ‘i’. Once the iButton is inserted in the  
enclosure, snap the end cap over it. The end cap is removed by depressing the release tab,  
swinging it fully open, and sliding out the hinge.  
3 of 5  
DS9490  
MECHANICAL DIMENSIONS  
All dimensions are in millimeters.  
Figure 6. DS9490R  
11.66  
20.42  
42.65  
13.89  
21.54  
3.12  
Figure 7. DS9490B  
56.82  
24.94  
11.66  
8.74  
16.54  
3.28  
ENVIRONMENTAL REQUIREMENTS  
CONDITION  
Storage  
PARAMETER  
VALUE  
-10°C to +85°C  
95%  
Temperature  
Storage  
Relative humidity, noncondensing  
Duration  
Storage  
1yr (max) at 95%RH and +85LC  
0°C to +70°C  
Operating  
Operating  
Temperature  
Relative humidity, noncondensing  
80%  
4 of 5  
DS9490  
ELECTRICAL CHARACTERISTICS  
PARAMETER  
USB I/F  
1-Wire I/F  
SPECIFICATION  
As defined in Chapter 7 of the USB Specification*  
See the DS2490 data sheet**  
The DS9490R and DS9490B consume 58mA in USB active mode and 0.5mA in suspend mode*. The  
DS9490R has the VBUS power and ground available on the RJ11 connector. In active mode the current  
available to an externally powered fixture is 42mA* (100mA to 58mA); however it is recommended that  
no more than 25mA be used. Note that in suspend mode there is zero current available to an external  
circuit. An external circuit cannot detect when the module is in suspend or active mode. Consequently,  
when in suspend mode, the DS9490R module with external circuit combination is in violation of the USB  
power specification. Application developers should be aware of this when using this module in  
conjunction with an externally powered circuit on power restricted platforms such as laptops.  
*Guaranteed by design, not production tested.  
**Tested at DS2490 component level.  
Figure 8. FUNCTIONAL DIAGRAM  
USB  
Connector  
EMI Filter  
L1  
1
VBUS  
C1  
2
0.1uF  
D-  
3
LP2980IM5-3.3  
D+  
4
EMI Filter  
1
3
5
2
GND  
L2  
VIN  
EN  
VOUT  
GND  
U2  
DS2490  
C3  
4.7  
1
24  
PMOD VD  
N/C  
C2  
J1  
4
R1  
1.0uF  
NC  
NC  
NC  
NC  
X1  
1.5K  
U1  
NC  
NC  
1
5
7
8
19  
20  
VB  
R2 24  
X1  
SUSO  
D-  
X0  
12Mhz  
NC  
VPP  
NC  
NC  
NC  
NC  
17  
3
D+  
R3 24  
NC  
10  
OW  
NC  
C6  
33pF  
C5  
33pF  
C8  
33pF  
C7  
12  
GND  
33pF  
U3  
2
DS2401  
OW  
GND  
DS9503  
1
1
6
OW  
GND  
Female RJ11  
5
2
1
2
3
4
5
6
U4  
J2  
DS9490R  
iButton Socket  
1
2
J3  
DS9490B  
5 of 5  

相关型号:

DS9490R

USB to 1-Wire/iButton Adapter
DALLAS

DS9490R

USB to 1-Wire/iButton Adapter
MAXIM

DS9490R_11

USB to 1-Wire/iButton Adapters High-Speed 12Mbps Universal Serial Bus (USB) Interface
MAXIM

DS9502

ESD Protection Diode
DALLAS

DS9502P

ESD Protection Diode
DALLAS

DS9502P

Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, 3.70 X 4 MM, 1.50 MM HEIGHT, TSOC-6
MAXIM

DS9502P+T&R

Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, 3.70 X 4 MM, 1.50 MM HEIGHT, TSOC-6
MAXIM

DS9502P/T&R

Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, 3.70 X 4 MM, 1.50 MM HEIGHT, TSOC-6
MAXIM

DS9503

ESD Protection Diode with Resistors
DALLAS

DS9503

ESD Protection Diode with Resistors
MAXIM

DS9503P

ESD Protection Diode with Resistors
DALLAS

DS9503P+

ESD Protection Diode with Resistors
MAXIM