N-P-5W-CF [DDK]
N Style Coaxial Connector;
| 型号： | N-P-5W-CF |
| 厂家： | 
DDK LTD. |
| 描述： | N Style Coaxial Connector |
| 文件： | 总12页 (文件大小：321K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
N Style Coaxial Connector
N Series
FEATURE
Characteristic
Impedance
・N series is a thread coupling coaxial connector
which isꢀthe most popular as a 7mm type 50 Ω
impedance.
50 Ω
・N series is available for various cable type.
・It is incompatible to NC series(75 Ω impedance N
Style connector).
Frequency
Range
DC to 3GHz
Lock Type
Screw
CONFORMING STANDARD
JIS-C5411,MIL-PRF-39012
SPECIFICATIONS
Characteristic Impedance
Rated Volatge
50 Ω
500VAC(r.m.s.)
Dielectric Withstanding Voltage 1,500V AC(r.m.s) / 1 minute
Insulation Resistance
Contact Resistance
V.S.W.R.
1,000M Ω min. at 500V DC
3m Ω max.
1.3 max. (DC 〜 3GHz)
-55 〜 +85℃
Operating Temperature
＊ The specifications are typical but may not apply to all connectors.
Please check the specifications on each item with its drawing from us when you use.
Also, the performance is diffrenet by using cable.
RRooHHSS
CCoommpplliiaanntt
MATERIAL/FINISH
Item
Shell
Contact (Female)
Contact (Male)
Insulator
Material / Finish
Copper Alloy / Ni or Ag Plating
Copper Alloy / Ag or Au Plating
Copper Alloy /Ag or Au Plating
PTFE
Gasket
Silicon Rubber
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
151222
http://www.ddknet.co.jp
Unit：mm
NꢀSeries
○ Straight Cable Plug
Finish
Outer Center
Conductor Conductor
Applicable
Cable
Clamp Type
Assembly
Instruction
Part Number
φA（L）
3C-2V
3D-2V
N-P-3-CF
6.2 44.6
6.2 44.6
6.2 44.6
7.2 44.6
7.2 44.6
7.2 44.6
Ag
Ag
Ag
Au
Ag
Ag
Au
1
1
1
1
1
1
3C-2V
N-P-3-Ni-CF
Ni
3D-2V
3C-2V
N-P-3-NiCAu-CF
N-P-3W-CF
Ni
3D-2V
（L）
3C-2W
3D-2W
3C-2W
3D-2W
3C-2W
3D-2W
RG-55/U
RG-55/U
RG-58/U
RG-58/U
RG-58/U
Ag
Ni
N-P-3W-Ni-CF
N-P-3W-D1-CF
Ni
N-P-55U-CF
5.4 44.6
5.4 44.6
5.4 44.6
5.4 44.6
5.4 44.6
Ag
Ni
Ag
Ag
Ag
Ag
Au
1
1
1
1
1
N-P-55U-Ni-CF
N-P-58U-CF
Ag
Ni
N-P-58U-Ni-1-CF
N-P-58U-NiCAu-CF
Ni
Finish
Center
Applicable
Cable
Assmbly
Instruction
Part Number
φA （L）
Outer
Conductor Conductor
3.5D-FE
3.5D-QEFA
5C-2V
N-SP-3.5DFE-CF
N-P-5-CF
6.2 41.5
8.6 44.0
8.6 44.0
9.1 45.0
9.1 45.0
9.1 45.0
Ni
Ag
Ni
Au
Ag
Ag
Ag
Ag
Au
ー
1
1
1
1
1
（L）
5D-2V
5C-2V
N-P-5-Ni-CF
5D-2V
5C-2W
5D-2W
5C-2W
5D-2W
5C-2W
5D-2W
5D-FB
N-P-5W-CF
Ag
Ni
N-P-5W-Ni-CF
N-P-5W-NiCAu-CF
Ni
N-P-5DFB-1-CF
N-SP-5DSFA-CF
8.1 44.0
8.6 41.5
Ni
Ni
Ag
Au
1
5D-SFA
RG-8/U
RG-9/U
RG-8/U
RG-9/U
RG-8/U
RG-9/U
ー
N-P-8U-CF
11.2 44.0
11.2 44.0
11.25 38.0
Ag
Ni
Ag
Ag
Ag
1
1
2
N-P-8U-Ni-CF
UG-21D/U-CF
Ag
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
2
Unit：mm
NꢀSeries
○ Straight Plug
Clamp Type
Finish
Outer Center
Conductor Conductor
Applicable
Cable
Assembly
Part Number
N-P-8-1-CF
φA
Instruction
8D-2V
8D-2V
8D-FB
12.6
12.6
11.8
Ag
Ni
Ag
Ag
Ag
4
4
4
N-P-8-1-Ni-CF
（38.0）
N-P-8DFB-1-CF
Ni
Finish
Center
Applicable
Cable
Assembly
Part Number
N-P-10-CF
φA
Outer
Instruction
Conductor Conductor
10C-2V
10D-2V
10C-2V
10D2V
10D-FB
14.2
Ag
Ag
4
N-P-Ni-CF
14.2
14.2
Ni
Ni
Ag
Ag
4
4
（51.7）
N-P-10DFB-1-CF
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
3
Unit：mm
NꢀSeries
○ Right Angle Cable Plug
Clamp Type
φ21
Finish
Center
ConductorConductor
Applicable
Cable
Assembly
Part Number
φA (L1)（L2）
Outer
Instruction
N-LP-58U-CF
RG-58/U
RG-58/U
5.4 52.9 36.6
5.4 52.9 36.6
Ag
Ag
ー
ー
N-LP-58U-Ni-CF
Ni
Ag
（L1）
Finish
Center
ConductorConductor
φ21
Applicable
Cable
Assembly
Part Number
φA（L1）(L2)
Outer
Instruction
N-LP-5-CF
5D-2V
5D-2V
8.6 53.0 36.6
8.6 53.0 36.6
Ag
Ag
ー
ー
N-LP-5-Ni-CF
Ni
Ag
（L1）
Finish
Applicable
Cable
Assembly
Instruction
φ21
Part Number
Outer
Center
Conductor Conductor
RG-8U
RG-9/U
RG-8U
RG-9/U
N-LP-8U-CF
Ag
Ag
ー
ー
N-LP-8U-Ni-CF
Ni
Ag
（47.0）
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
4
Unit：mm
NꢀSeries
○Straight Cable Jack
Clamp Type
Finish
Applicable
Cable
Assembly
Instruction
Part Number
φA
Outer
Center
Conductor Conductor
3C-2V
3D-2V
N-J-3-CF
6.2
6.2
Ag
Ag
2
2
（46）
3C-2V
N-J-3-Ni-CF
Ni
Ag
3D-2V
N-J-58U-CF
RG-58/U
RG-58/U
5.4
5.4
Ag
Ni
Ag
Ag
2
2
N-J-58U-Ni-CF
Finish
Applicable
Cable
Assembly
Part Number
φA (L)
Outer
Center
Instruction
Conductor Conductor
N-J-5-CF
5D-2V
5D-2V
8.6
8.6
47.0
47.0
Ag
Ag
2
2
（L）
N-J-5-Ni-CF
Ni
Ag
RG-8/U
RG-9/U
RG-8/U
RG-9/U
N-J-8U-CF
11.2 47.0
11.2 47.0
Ag
Ni
Ag
Ag
2
2
N-J-8U-Ni-CF
Finish
Applicable
Cable
Assembly
Part Number
φA φB (L)
Outer
Center
Instruction
Conductor Conductor
N-J-8-1-CF
8D-2V
8D-2V
12.7 19.1 41.2
12.7 19.1 41.2
Ag
Ag
5
5
N-J-8-1-Ni-CF
Ni
Ag
（L）
RG-8/U
RG-9/U
UG-23D/U-CF
11.2 19.0 40.0
Ag
Ag
5
Finish
Applicable
Cable
Assembly
Part Number
N-J-10-CF
φA φB
14.2 22.2
Outer
Center
Instruction
Conductor Conductor
10C-2V
10D-2V
10C-2V
10D-2V
10D-FB
Ag
Ag
5
（52.7）
N-J-10-Ni-CF
14.2 22.2
14.2 22.2
Ni
Ni
Ag
Ag
5
5
N-J-10DFB-1-CF
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
5
Unit：mm
NꢀSeries
○ Straight Panel Cable Jack
4-φ3.2
Finish
Outer Center
Conductor Conductor
2.0
B
Applicable
Cable
Assembly
Instruction
Part Number
φA
B
C
3C-2V
3D-2V
N-PJ-3-CF
6.2
6.2
16.7 18.2
16.7 18.2
Ag
Ni
Ag
Ag
3
3
C
3C-2V
N-PJ-3-Ni-CF
（46）
□25.4
3D-2V
N-PJ-55U-CF
RG-55/U
RG-55/U
RG-58/U
RG-58/U
5.4
5.4
5.4
5.4
16.6 18.2
16.6 18.2
16.6 18.2
16.6 18.2
Ag
Ni
Ag
Ag
Ag
Ag
3
3
3
3
+0.1
0
N-PJ-55U-Ni-CF
N-PJ-58U-CF
4-φ3.2
Ag
Ni
N-PJ-58U-Ni-CF
+0.1
0
φ17.8
±0.05
18.2
Panel Mounting Dimensions
Finish
4-φ3.2
Applicable
Cable
2.0
C
Assembly
Instruction
Part Number
φA
B
C
D
Outer
Center
Conductor Conductor
5C-2V
5D-2V
5D-2V
N-PJ-5-CF
8.6
8.6
17.5 16.7 18.24
17.5 16.7 18.24
Ag
Ni
Ag
Ag
3
3
N-PJ-5-Ni-CF
D
（47）
□25.4
+0.1
0
4-φ3.2
+0.1
0
φ18.0
±0.05
18.24
Panel Mounting Dimensions
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
6
Unit：mm
NꢀSeries
○Receptacle Jack
4-φA
Finish
Center
Conductor Conductor
Part Number
N-R-CF
L
φ A
Outer
29
29
29
29
Ag
Ni
Ag
Ag
Au
Ag
φ 3.2
φ 3.2
φ 3.2
φ 3.2
N-R-Ni-CF
N-R-NiCAu-CF
UG-58A/U-CF
Ni
2
18.7
18.2
Ag
□25.4
L
+0.1
0
4-φ3.2
+0.1
0
φ15.0
±0.05
18.2
Panel Mounting Dimensions
○Dust Cap
5/8-24UNEF-2B
（φ3.5）
Part Number
Finish
Ni
N-RC-5
N-RC-5-D1
Ag
（60）
（71）
5/8-24UNEF-2B
Part Number
N-RC-3-CF
Finish
Ni
11.1
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
7
Unit：mm
NꢀSeries
○Assembly Instruction(1) Straight Cable Plug
Parts Configulration
Contact
Insulator
Washer
Nut
Washer
Gasket
Clamp
Body
①
②
The Cable length require for the single-ended
cable assembly.
① L=
L=L1-10
L1
Outer
Sheath
Conductor
Insert the nut, washer and gasket into the cable.
ꢀ Cut the sheath 15mm from the end of the cable
and insert the clamp.
②
Please be careful to not damage the outer
conductor.
15mm
Gasket
Washer
Clamp
Nut
Pick the outer conductor and turn
down to the clamp equally.
Insulator
Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
③
④
Canter Conductor
（Pre-soldering）
③
④
5.0mm
3.5～4.0mm
3.5mm
Solder up the contact with the center conductor.
Please be careful to not deform the
insulator by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
Soldering
Contact
No gap
Insert the ring and insulator as fig. 5.
⑤
● In case of the insulator which has directivity,
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
diameter of the washer.
⑤
⑥
Washer
Insulator
Washer
Insulator
Insert the above assembly into the body and screw
up by wrench.
⑥
Applicable Cable
3C-2V, 3D-2V, 3C-2W,3D-2W,
RG-55/U, RG-58/U
5C-2V, 5D-2V
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
392N・cm(40kgf・cm)
5C-2W, 5D-2W
490 〜 686N・cm(50 〜 70kgf・cm)
441 〜 539N・cm(45 〜 55kgf・cm)
343 〜 392N・cm(35 〜 40kgf・cm)
5D-FB
RG-8/U, RG-9/U
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
8
Unit：mm
NꢀSeries
○Assembly Instruction(2) Straight Cable Jack
Parts Configulration
Washer
Body
Washer
Clamp
Insulator
Contact
Gasket
Nut
The Cable length require for the single-ended
cable assembly.
①
②
① L=
L
1
L=L1-12
Nut
Gasket
Outer
Conductor
Insert the nut, washer and gasket into the cable.
②
ꢀCut the sheath 15mm from the end of the cable
and insert the calmp.
Please be careful to not damage the outer conductor .
Cable
15mm
Washer
Center Conductor
（Pre-soldering）
Insulator
Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
③
④
③
④
Clamp
3.5～4mm
3.5mm
mm
5
Solder up the contact with the center conductor.
Please be careful to not deform the
insulator by heat.
When the solder is stick out, please shave the
extra solder.
No gap between contact and insulator of
the cable.
Contact
Soldering
No gap
Washer
Insert the ring and insulator as fig. 5.
⑤
● In case of the insulator which has directivity,
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
diameter of the washer.
⑤
⑥
Insulator
Washer
Insulator
Insert the above assembly into the body and screw
up by wrench.
⑥
Applicable Cable
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
490 〜 686N・cm(50 〜 70kgf・cm)
343 〜 392N・cm(35 〜 40kgf・cm)
3C-2V, 3D-2V, RG-58/U,
5D-2V
RG-8/U,RG-9/U
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
9
Unit：mm
NꢀSeries
○Assmbly Instruction(3）Straight Panel Jack
Parts Configulration
Washer
Body
Washer
Clamp
Insulator
Contact
Gasket
Nut
The Cable length require for the single-ended
① L=
cable assembly.
①
②
1
L=L -6.7
ꢀꢀ L=-L -1.2
2
L
1
L
2
Nut
Gasket
Outer
Conductor
Insert the nut, washer and gasket into the cable.
②
ꢀ Cut the sheath 15mm from the end of the cable
and insert the clamp.
Please be careful to not damage the outer
conductor.
mm
15
Cable
Washer
Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
③
Insulator Center Conductor
（Pre-soldering)
③
④
Clamp
3.5～4mm
3.5mm
5mm
Solder up the contact with the center conductor.
④
Contact
Soldering
ꢀ Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave the extra
solder.
No gap
No gap between contact and insulator of the cable.
Washer
Insert the ring and insulator as fig. 5.
⑤
⑤
⑥
● In case of the insulator which has directivity,
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
diameter of the washer.
Insulator
Washer
Insulator
Insert the above assembly into the body and screw
up by wrench.
⑥
Recommended Tightening Torque
ꢀꢀꢀꢀꢀꢀꢀꢀ
：196 〜 392N・cm(20 〜 40kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
10
Unit：mm
NꢀSeries
○Assembly Instruction(4）MIL Clamp Straigh Cable Plug
Parts Configulration
Nut
Gasket
※Washer
Clamp
Body
Contact
※ As for N-P-8-1-CF, N-P-8-1-Ni-CF, UG-21D/U-CF and N-P-8DFB-1-CF
washer is not attached. The washer is not inserted into the cable.
The cable length require for the single-ended
cable assembly as following table.
①
①
②
Part Number
N-P-8-1-CF
N-P-8-1-Ni-CF
UG-21D/U-CF
N-P-10-CF
L（mm）
L (mm)
2
L
1
L ー11.4
1
10
13
Outer
Conductor
Washer
Sheath
N-P-10-Ni-CF
N-P-10DFB-1-CF
N-P-8DFB-1-CF
L ー21.5
1
L -14.2
1
Insert the nut, washer and gasket into the cable.
②
L2
ꢀ Cut the sheath from the end of the cable
and insert the clamp.
Clamp
Gasket
Nut
Please be careful to not damage the outer conductor.
Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
③
Tip the outer conductor and
③
turn down to the clamp equally.
Insulator
Center Conductor
（Pre-soldering）
Part Number
A（mm）
B（mm）
C(mm)
C
B
N-P-8-1-CF
N-P-8-1-Ni-CF
UG-21D/U-CF
A
1.0
3.5 〜 4.0
5
N-P-10-CF
④
⑤
Soldering
Contact
N-P-10-Ni-CF
N-P-10DFB-1-CF
1.8
1.8
4.0 〜 4.5
3.5 〜 4.0
N-P-8DFB-1-CF
4.5
Solder up the contact with the center conductor.
Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
④
⑤
No gap
Insert the above assembly into the body and screw
up by wrench.
Applicable Cable
Recommended Tightening Torque
196 〜 392N・cm(20 〜 40kgf・cm)
294 〜 392N・cm(30 〜 40kgf・cm)
294N・cm(30kgf・cm)
RG-8/U, RG-9/U
8D-2V
8D-FB
10C-2V, 10D-2V
10D-FB
980N・cm(100kgf・cm)
294N・cm(30kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
11
Unit：mm
NꢀSeries
○Assembly Instruction(5）MIL Clamp Straight Cable Jack
Parts Configulration
Nut
Gasket
Calmp
Contact
Body
※Washer
※ As for N-J-8-1-CF, N-J-8-1-Ni-CF and UG-23D/U-CF,
the washer is not attached. The washer is not inserted into the cable.
The cable length require for the single-ended
cable assembly as following table.
①
①
②
Part Number
ꢀN-J-8-1-CF
ꢀN-J-8-1-Ni-CF
ꢀUG-23D/U-CF
ꢀN-J-10-CF
L（mm）
ꢀꢀꢀL ー13.2
L
1
1
L ー13.8
1
Washer
Sheath
Outer conductor
Clamp
ꢀN-J-10-Ni-CF
ꢀN-J-10DFB-1-CF
ꢀꢀꢀL ー23.4
1
Insert the nut, washer and gasket into the cable.
ꢀ Cut the sheath 10mm from the end of the cable
and insert the clamp.
②
10mm
Nut
Gasket
Please be careful to not damage the outer
conductor.
Pick the outer conductor and
turn down to the clamp equally/ Insulator
Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
Cut the insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
③
③
④
Outer Conductor
（Pre-soldering）
mm
5
Part Number
A（mm）
B（mm）
A
B
N-J-8-1-CF
N-J-8-1-Ni-CF
UG-23D/U-CF
1.0
3.5 〜 4.0
Soldering
Contact
N-J-10-CF
N-J-10-Ni-CF
N-J-10DFB-1-CF
1.8
4.0 〜 4.5
No gap
Solder up the contact with the center conductor.
Please be careful to not deform the insulator
by heat.
④
⑤
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
the cable.
⑤
Insert the above assembly into the body and screw
up by wrench.
Applicable Cable
Recommended Tightening Torque
294 〜 392N・cm(30 〜 40kgf・cm)
980N・cm(100kgf・cm)
8D-2V, RG-8/U, RG-9/U
10C-2V, 10D-2V
10D-FB
294N・cm(30kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明