IPM12S0A0S08FA [DELTA]
Delphi Series IPM, Non-Isolated, Integrated Point-of-Load Power Modules: 3V~5.5V input, 0.8~3.3V and 10A Output Current; 德尔福系列IPM ,非隔离式负载点的集成功率模块: 3V 〜 5.5V的输入电压, 0.8 〜 3.3V及10A输出电流型号: | IPM12S0A0S08FA |
厂家: | DELTA ELECTRONICS, INC. |
描述: | Delphi Series IPM, Non-Isolated, Integrated Point-of-Load Power Modules: 3V~5.5V input, 0.8~3.3V and 10A Output Current |
文件: | 总15页 (文件大小:752K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FEATURES
ꢀ
High efficiency: 94% @ 5.0Vin, 3.3V/10A out
ꢀ
Small size and low profile:
17.8x15.0x7.8mm (0.70”x0.59”x0.31”)
Output voltage adjustment: 0.9V~3.3V
Monotonic startup into normal and
pre-biased loads
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Input UVLO, output OCP
Remote ON/OFF
Output short circuit protection
Fixed frequency operation
Copper pad to provide excellent thermal
performance
ꢀ
ꢀ
ꢀ
ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing facility
UL/cUL 60950 (US & Canada) Recognized,
and TUV (EN60950) Certified
CE mark meets 73/23/EEC and 93/68/EEC
directives
Delphi Series IPM, Non-Isolated, Integrated
Point-of-Load Power Modules: 3V~5.5V input,
0.8~3.3V and 10A Output Current
The Delphi Series IPM04S non-isolated, fully integrated
Point-of-Load (POL) power modules, are the latest offerings from a
world leader in power supply technology and manufacturing ― Delta
Electronics, Inc. This product family provides up to 10A of output
current or 33W of output power in an industry standard, compact,
IC-like, molded package. It is highly integrated and does not require
external components to provide the point-of-load function. A copper
pad on the back of the module, in close contact with the internal heat
dissipation components, provides excellent thermal performance.
The assembly process of the modules is fully automated with no
manual assembly involved. These converters possess outstanding
electrical and thermal performance, as well as extremely high
reliability under highly stressful operating conditions. IPM04S
operate from a 3V~5.5V source and provide a programmable output
voltage of 0.8V~3.3V. The IPM product family is available in both a
SMD or SIP package. IPM family is also available for input 8V~14V,
please refer to IPM12S datasheet for details.
OPTIONS
ꢀ
SMD or SIP package
APPLICATIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Telecom/DataCom
Wireless Networks
Optical Network Equipment
Server and Data Storage
Industrial/Test Equipment
DATASHEET
IPM04S0A0R/S10_12182006
Delta Electronics, Inc.
TECHNICAL SPECIFICATIONS
TA = 25°C, airflow rate = 300 LFM, Vin = 5.0Vdc, nominal Vout unless otherwise noted.
PARAMETER
NOTES and CONDITIONS
IPM04S0A0R/S10FA
Min.
Typ.
Max.
Units
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Operating Temperature
0
-40
-55
6
Vdc
°C
°C
Refer to figure 33 for measuring point
+116
+125
Storage Temperature
INPUT CHARACTERISTICS
Operating Input Voltage
Input Under-Voltage Lockout
Turn-On Voltage Threshold
Turn-Off Voltage Threshold
Maximum Input Current
3.0
1.9
3.3/5.0
5.5
2.9
V
2.6
2.2
V
V
A
Vin=Vin,min to Vin,max, Io=Io,max
9.0
150
10
No-Load Input Current
mA
mA
mAp-p
dB
Off Converter Input Current
Input Reflected-Ripple Current
Input Voltage Ripple Rejection
OUTPUT CHARACTERISTICS
Output Voltage Set Point
Output Voltage Adjustable Range
Output Voltage Regulation
Over Line
3
100
TBD
P-P 1µH inductor, 5Hz to 20MHz
120 Hz
150
Vin=5.0V, Io=Io,max, Ta=25℃
- 2.5
0.8
+ 2.5
3.3
% Vo,set
V
Vin=Vin,min to Vin,max
Io=Io,min to Io,max
10
15
mV
mV
Over Load
Over Temperature
Ta=Ta,min to Ta,max
15
mV
Total Output Voltage Range
Output Voltage Ripple and Noise
Peak-to-Peak
Over sample load, line and temperature
5Hz to 20MHz bandwidth
Full Load, 1µF ceramic, 10µF tantalum
Full Load, 1µF ceramic, 10µF tantalum
-3.0
0
+3.0
% Vo,set
50
10
100
15
10
3
mVp-p
mV
A
% Vo,set
% Io
RMS
Output Current Range
Output Voltage Over-shoot at Start-up
Output DC Current-Limit Inception
DYNAMIC CHARACTERISTICS
Dynamic Load Response
Positive Step Change in Output Current
Negative Step Change in Output Current
Setting Time to 10% of Peak Devitation
Turn-On Transient
Vin=3.0V to 5.5V, Io=0A to 10A, Ta=25℃
0
220
10µF Tan & 1µF Ceramic load cap, 0.5A/µs
50% Io, max to 100% Io, max
100% Io, max to 50% Io, max
130
130
25
165
165
50
mVpk
mVpk
µs
Io=Io.max
Start-Up Time, From On/Off Control
Start-Up Time, From Input
Output Voltage Rise Time
Maximum Output Startup Capacitive Load
5
5
3
12
12
5
20
20
7
1000
5000
ms
ms
ms
µF
µF
Time for Vo to rise from 10% to 90% of Vo,set,
Full load; ESR ≧1mΩ
Full load; ESR ≧10mΩ
EFFICIENCY
Vo=0.9V
Vo=1.2V
Vo=1.5V
Vo=1.8V
Vo=2.5V
Vo=3.3V
Vin=5.0V, Io=Io,max, Ta=25℃
Vin=5.0V, Io=Io,max, Ta=25℃
Vin=5.0V, Io=Io,max, Ta=25℃
Vin=5.0V, Io=Io,max, Ta=25℃
Vin=5.0V, Io=Io,max, Ta=25℃
Vin=5.0V, Io=Io,max, Ta=25℃
81.0
85.0
88.0
90.0
92.5
94.0
%
%
%
%
%
%
FEATURE CHARACTERISTICS
Switching Frequency
ON/OFF Control, (Logic High-Module ON)
Logic High
300
kHz
Module On
2.2
Vin,max
V
Logic Low
Module Off
Ion/off at Von/off=0
Logic High, Von/off=5V
-0.2
0.8
1
50
V
mA
µA
ON/OFF Current
Leakage Current
GENERAL SPECIFICATIONS
MTBF
0.25
Io=80% Io,max, Ta=25℃
13.3
6
M hours
grams
Weight
DS_IPM04S0A010_12182006
2
ELECTRICAL CHARACTERISTICS CURVES
90
95
85
75
80
Vin=5.0V
Vin=4.0V
Vin=3.3V
Vin=5.0V
Vin=4.0V
Vin=3.3V
70
1
2
3
4
5
6
7
8
9
10
10
10
1
2
3
4
5
6
7
8
9
10
10
10
LOAD (A)
LOAD (A)
Figure 1: Converter efficiency vs. output current
Figure 2: Converter efficiency vs. output current
(0.90V output voltage)
(1.2V output voltage)
95
95
85
75
85
Vin=5.0V
Vin=4.0V
Vin=3.3V
Vin=5.0V
Vin=4.0V
Vin=3.3V
75
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
LOAD (A)
LOAD (A)
Figure 3: Converter efficiency vs. output current
Figure 4: Converter efficiency vs. output current
(1.5V output voltage)
(1.8V output voltage)
95
95
Vin=5.5V
Vin=5.0V
Vin=4.0V
Vin=5.0V
Vin=4.0V
Vin=3.3V
85
75
85
75
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
LOAD (A)
LOAD (A)
Figure 5: Converter efficiency vs. output current
Figure 6: Converter efficiency vs. output current
(2.5V 0utput voltage)
(3.3V output voltage)
DS_IPM04S0A010_12182006
3
ELECTRICAL CHARACTERISTICS CURVES
Figure 7: Output ripple & noise at 5.0Vin, 0.9V/10A out
Figure 8: Output ripple & noise at 5.0Vin, 1.2V/10A out
Figure 10: Output ripple & noise at 5.0Vin, 1.8V/10A out
Figure 12: Output ripple & noise at 5.0Vin, 3.3V/10A out
Figure 9: Output ripple & noise at 5.0Vin, 1.5V/10A out
Figure 11: Output ripple & noise at 5.0Vin, 2.5V/10A out
DS_IPM04S0A010_12182006
4
ELECTRICAL CHARACTERISTICS CURVES
Figure 13: Power on waveform at 5.0vin, 0.9V/10A out
Figure 14: Power on waveform at 5.0vin, 3.3V/10A out
with application of Vin
with application of Vin
Figure 15: Power off waveform at 5.0vin, 0.9V/10A out
Figure 16: Power off waveform 5.0vin, 3.3V/10A out
with application of Vin
with application of Vin
Figure 17: Remote turn on delay time at 5.0vin,
Figure 18: Remote turn on delay time at 5.0vin,
0.9V/10A out
3.3V/10A out
DS_IPM04S0A010_12182006
5
ELECTRICAL CHARACTERISTICS CURVES
Figure 19: Turn on delay at 5.0vin, 0.9V/10A out
Figure 20: Turn on delay at 5.0vin, 3.3V/10A out
with application of Vin
with application of Vin
Figure 21: Typical transient response to step load change at
0.5A/µS from 0% to 50% of Io, max at 5.0Vin,
2.5V out (measurement with a 1uF ceramic
and a 10µF tantalum
Figure 22: Typical transient response to step load change at
0.5A/µS from 50% to 0% of Io, max at 5.0Vin,
2.5V out (measurement with a 1uF ceramic
and a 10µF tantalu)
DS_IPM04S0A010_12182006
6
TEST CONFIGURATIONS
DESIGN CONSIDERATIONS
TO OSCILLOSCOPE
Input Source Impedance
L
To maintain low-noise and ripple at the input voltage, it is
critical to use low ESR capacitors at the input to the
module. Figure 26 shows the input ripple voltage
(mVp-p) for various output models using 2x100 uF low
ESR tantalum capacitors (KEMET P/N:T491D107M,
100uF/16V or equivalent) or 2x22 uF very low ESR
ceramic capacitors (TDK P/N:C3225X7S1C226MT,
22uF/16V or equivalent).
VI(+)
100uF
2
Tantalum
BATTERY
VI(-)
Note: Input reflected-ripple current is measured with a
simulated source inductance. Current is
measured at the input of the module.
The input capacitance should be able to handle an AC
ripple current of at least:
Figure 23: Input reflected-ripple current test setup
Vout
Vin
Vout
Vin
⎛
⎜
⎞
⎟
Irms = Iout
1 −
Arms
⎝
⎠
COPPER STRIP
Vo
300
250
200
150
100
50
Resistive
Load
1uF
10uF
tantalum ceramic
SCOPE
GND
Note: Use a 10µF tantalum and 1µF capacitor. Scope
measurement should be made using a BNC
connector.
Tantalum
Ceramic
0
0
Figure 24: Peak-peak output noise and startup transient
1
2
3
4
measurement test setup
Output Voltage (Vdc)
CONTACT AND
DISTRIBUTION LOSSES
VI
Vo
I
I
Io
Figure 26: Input ripple voltage for various output models,
Io = 10A (Cin = 2x100uF tantalum capacitors or
2x22uF ceramic capacitors at the input)
LOAD
SUPPLY
GND
The power module should be connected to a low
ac-impedance input source. Highly inductive source
impedances can affect the stability of the module. An
input capacitance must be placed close to the modules
input pins to filter ripple current and ensure module
stability in the presence of inductive traces that supply
the input voltage to the module.
CONTACT RESISTANCE
Figure 25: Output voltage and efficiency measurement test
setup
Note: All measurements are taken at the module
terminals. When the module is not soldered (via
socket), place Kelvin connections at module
terminals to avoid measurement errors due to
contact resistance.
Vo× Io
η = (
)×100 %
Vi × Ii
DS_IPM04S0A010_12182006
7
DESIGN CONSIDERATIONS
FEATURES DESCRIPTIONS
Safety Considerations
Over-Current Protection
For safety-agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards.
To provide protection in an output over load fault
condition, the unit is equipped with internal over-current
protection. When the over-current protection is
triggered, the unit enters hiccup mode. The units
operate normally once the fault condition is removed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power module
has extra-low voltage (ELV) outputs when all inputs are
ELV.
Pre-Bias Startup Capability
The IPM would perform the monotonic startup into the
pre-bias loads; so as to avoid a system voltage drop
occur upon application. In complex digital systems an
external voltage can sometimes be presented at the
output of the module during power on. This voltage may
be feedback through a multi-supply logic component,
such as FPGA or ASIC. Another way might be via a
clamp diode as part of a power up sequencing
implementation.
The input to these units is to be provided with a
maximum 10A time-delay fuse in the ungrounded lead.
Remote On/Off
The IPM series power modules have an On/Off control
pin for output voltage remote On/Off operation. The
On/Off pin is an open collector/drain logic input signal
that is referenced to ground. When On/Off control pin is
not used, leave the pin unconnected.
The remote on/off pin is internally connected to +Vin
through an internal pull-up resistor. Figure 27 shows the
circuit configuration for applying the remote on/off pin.
The module will execute a soft start ON when the
transistor Q1 is in the off state.
The typical rise for this remote on/off pin at the output
voltage of 0.9V and 3.3V are shown in Figure 17 and 18.
Vo
Vin
IPM
On/Off
RL
Q1
GND
Figure 27: Remote on/off implementation
DS_IPM04S0A010_12182006
8
FEATURES DESCRIPTIONS (CON.)
Output Voltage Programming
For example, to program the output voltage of a IPM
module to 3.3 Vdc, Vtrim is calculated as follows
The output voltage of IPM can be programmed to any
voltage between 0.9Vdc and 3.3Vdc by connecting one
resistor (shown as Rtrim in Figure 28, 29) between the
TRIM and GND pins of the module to trim up (0.9V ~
3.3V) and between the Trim and +Output to trim down
(0.8V ~ 0.9V). Without this external resistor, the output
voltage of the module is 0.9 Vdc. To calculate the value of
the resistor Rtrim for a particular output voltage Vo,
please use the following equation:
Vtrim = 0.7168 – 0.0187 x 3.3
Vtrim = 0.6551V
Trim up
7.0
Vadj. –0.9
Rtrim =
Trim Down
Rtrim =
- 0.187 (KΩ)
- 10.187 (KΩ)
2.0
0.9 – Vadj.
Figure 28: Trim up Circuit configuration for programming
output voltage using an external resistor
Rtrim is the external resistor in KΩ
Vout is the desired output voltage
Vout
For example: to program the output voltage of the IPM
module to 3.3Vdc, Rtrim is calculated as follows:
Rtrim
Load
Trim
GND
7.0
3.3 –0.9
Rtrim =
- 0.187 (KΩ)
Rtrim = 2.729 KΩ
Figure 29: Trim down Circuit configuration for programming
output voltage using an external resistor
IPM can also be programmed by applying a voltage
between the TRIM and GND pins (Figure 30). The
following equation can be used to determine the value of
Vtrim needed for a desired output voltage Vo:
Vtrim = 0.7168 – 0.0187Vo
Vtrim is the external voltage in V
Vo is the desired output voltage
Figure 30: Circuit configuration for programming output voltage
using external voltage source
DS_IPM04S0A010_12182006
9
FEATURE DESCRIPTIONS (CON.)
Table 1 provides Rtrim values required for some common
output voltages, while Table 2 provides value of external
voltage source, Vtrim, for the same common output
voltages. By using a 0.5% tolerance resistor, set point
tolerance of ±2.5% can be achieved as specified in the
electrical specification.
The amount of power delivered by the module is the
voltage at the output terminals multiplied by the output
current. When using the trim feature, the output voltage
of the module can be increased, which at the same
output current would increase the power output of the
module. Care should be taken to ensure that the
maximum output power of the module must not exceed
the maximum rated power (Vo.set x Io.max ≤ P max).
Table 1
Voltage Margining
VO (V)
0.9
Rtrim (Ω)
Open
Output voltage margining can be implemented in the IPM
modules by connecting a resistor, Rmargin-up, from the Trim
pin to the ground pin for margining-up the output voltage
and by connecting a resistor, Rmargin-down, from the Trim pin
to the output pin for margining-down. Figure 31 shows
the circuit configuration for output voltage margining. If
unused, leave the trim pin unconnected.
1.2
23.146K
11.479K
7.590K
4.188K
2.729K
1.5
1.8
2.5
3.3
Table 2
Vo
Vin
VO (V)
0.9
1.2
1.5
1.8
Vtrim (V)
0.7000
0.6943
0.6887
0.6831
0.6700
0.6551
Rmargin-down
Q1
IPM
Trim
On/Off
Rmargin-up
Q2
2.5
3.3
Rtrim
GND
Figure 31: Circuit configuration for output voltage margining
DS_IPM04S0A010_12182006
10
THERMAL CURVES
THERMAL CONSIDERATIONS
Thermal management is an important part of the system
design. To ensure proper, reliable operation, sufficient
cooling of the power module is needed over the entire
temperature range of the module. Convection cooling is
usually the dominant mode of heat transfer.
Hence, the choice of equipment to characterize the
thermal performance of the power module is a wind
tunnel.
Thermal Testing Setup
Delta’s DC/DC power modules are characterized in
heated vertical wind tunnels that simulate the thermal
environments encountered in most electronics
equipment. This type of equipment commonly uses
vertically mounted circuit cards in cabinet racks in which
the power modules are mounted.
Figure 33: Temperature measurement location
* The allowed maximum hot spot temperature is defined at 116℃.
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
The following figure shows the wind tunnel
characterization setup. The power module is mounted on
a test PWB and is vertically positioned within the wind
tunnel. The height of this fan duct is constantly kept at
25.4mm (1’’).
@ Vin=5V, Vout = 3.3V (Either Orientation)
Output Current(A)
12
10
8
Natural
Convection
Thermal Derating
6
100LFM
Heat can be removed by increasing airflow over the
module. To enhance system reliability, the power
module should always be operated below the maximum
operating temperature. If the temperature exceeds the
maximum module temperature, reliability of the unit may
be affected.
4
200LFM
2
0
40
45
50
55
60
65
70
75
80
85
Ambient Temperature (℃)
Figure 34: Output current vs. ambient temperature and air velocity
PWB
FACING PWB
@ Vin=5V, Vo=3.3V(either orientation)
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
MODULE
Output Current(A)
@ Vin=5V, Vout = 1.8V (Either Orientation)
12
10
8
AIR VELOCITY
AND AMBIENT
TEMPERATURE
MEASURED BELOW
THE MODULE
Natural
Convection
50.8 (2.0”)
6
100LFM
200LFM
AIR FLOW
4
2
12.7 (0.5”)
25.4 (1.0”)
0
40
45
50
55
60
65
70
75
80
85
Ambient Temperature (℃)
Figure 32: Wind tunnel test setup figure
Figure 35: Output current vs. ambient temperature and air velocity
@ Vin=5V, Vo=1.8V(either orientation)
DS_IPM04S0A010_12182006
11
THERMAL CURVES (CON.)
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
@ Vin=3.3V, Vout = 0.9V (Either Orientation)
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
Output Current(A)
@ Vin=5V, Vout = 0.9V (Either Orientation)
Output Current(A)
12
10
8
12
10
8
Natural
Convection
Natural
Convection
6
6
100LFM
100LFM
4
4
2
2
0
0
40
45
50
55
60
65
70
75
80
85
40
45
50
55
60
65
70
75
80
85
Ambient Temperature (℃)
Ambient Temperature (℃)
Figure 39: Output current vs. ambient temperature and air velocity
Figure 36: Output current vs. ambient temperature and air velocity
@ Vin=3.3V, Vo=0.9V(Either Orientation)
@ Vin=5V, Vo=0.9V(Either Orientation)
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
Output Current(A)
@ Vin=3.3V, Vout = 2.5V (Either Orientation)
12
10
8
Natural
Convection
6
100LFM
4
2
0
40
45
50
55
60
65
70
75
80
85
Ambient Temperature (℃)
Figure 37: Output current vs. ambient temperature and air velocity
@ Vin=3.3V, Vo=2.5V(Either Orientation)
IPM04S (Standard) Output Current vs. Ambient Temperature and Air Velocity
@ Vin=3.3V, Vout = 1.5V (Either Orientation)
Output Current(A)
12
10
8
Natural
Convection
6
100LFM
4
2
0
40
45
50
55
60
65
70
75
80
85
Ambient Temperature (℃)
Figure 38: Output current vs. ambient temperature and air velocity
@ Vin=3.3V, Vo=1.5V(Either Orientation)
DS_IPM04S0A010_12182006
12
SURFACE- MOUNT TAPE & REEL
PICK AND PLACE LOCATION
All dimensions are in millimeters (inches)
All dimensions are in millimeters (inches)
LEAD FREE PROCESS RECOMMEND TEMP. PROFILE
.
Temp
Peak Temp. ~ 220
℃
210℃
200℃
Ramp down
max. 4 /sec
℃
150℃
Preheat time
90~150 sec
Time Limited 60 sec
above 210
℃
Ramp up
max. 3 /sec
℃
25℃
Time
Note: All temperature refers to topside of the package, measured on the package body surface.
LEADED (Sn/Pb) PROCESS RECOMMEND TEMP. PROFILE
.
Temp
Peak Temp. ~ 225
℃
Ramp down
max. 4 /sec
183℃
150℃
℃
100℃
Preheat time
60~150 sec
60 ~ 120 sec
Ramp up
max. 3 /sec
℃
25℃
Time
Note: All temperature refers to assembly application board, measured on the land of assembly application board.
DS_IPM04S0A010_12182006
13
MECHANICAL DRAWING
SMD PACKAGE
SIP PACKAGE
1
2 3 4 5
RECOMMEND PWB PAD LAYOUT
RECOMMEND PWB HOLE LAYOUT
Note: The copper pad is recommended to connect to the ground.
7
6
1
2 3 4 5
1
2 3 4 5
Note: All dimension are in millimeters (inches) standard dimension tolerance is± 0.10(0.004”)
DS_IPM04S0A010_12182006
14
PART NUMBERING SYSTEM
IPM
04
S
0A0
R
10
F
A
Product
Family
Number of
Outputs
Output
Current
08 - 8A
Input Voltage
Output Voltage
Package
Option Code
F- RoHS 6/6
(Lead Free)
Integrated POL 04 - 3V ~ 5.5V
Module 12 - 8V ~ 14V
S - Single 0A0 - programmable output
R - SIP
A - Standard Functions
S - SMD
10 - 10A
MODEL LIST
Efficiency (Typical @ full
Model Name
Packaging
Input Voltage
Output Voltage
Output Current
IPM12S0A0R08FA
IPM12S0A0S08FA
IPM04S0A0R10FA
IPM04S0A0S10FA
SIP
SMD
SIP
8V ~ 14V
8V ~ 14V
3V ~ 5.5V
3V ~ 5.5V
0.8V ~ 5V
0.8V ~ 5V
8A
8A
93%
93%
94%
94%
0.8V ~ 3.3V
0.8V ~ 3.3V
10A
10A
SMD
CONTACT: www.delta.com.tw/dcdc
USA:
Telephone:
East Coast: (888) 335 8201
West Coast: (888) 335 8208
Fax: (978) 656 3964
Email: DCDC@delta-corp.com
Asia & the rest of world:
Telephone: +886 3 4526107 ext 6220
Fax: +886 3 4513485
Europe:
Phone: +41 31 998 53 11
Fax: +41 31 998 53 53
Email: DCDC@delta.com.twT
Email: DCDC@delta-es.com
WARRANTY
Delta offers a two (2) year limited warranty. Complete warranty information is listed on our web site or is available upon
request from Delta.
Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta
for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license
is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these
specifications at any time, without notice.
DS_IPM04S0A010_12182006
15
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明