CDC-0252-0500-5-ACBM2-R [DH]
Chain drives;型号: | CDC-0252-0500-5-ACBM2-R |
厂家: | D+H Mechatronic AG |
描述: | Chain drives |
文件: | 总3页 (文件大小:404K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CDC Series Chain drives
CDC-0252-0500-5-ACB
230 V AC
Performance features
»
Can be used for openings for smoke exhaust; D+H Euro SHEV in
accordance with EN 12101‑2; and for daily ventilation
»
»
»
Flexible overall lengths for customised strokes
Available in all RAL colours
»
»
Perfectly suited for profile integrated and surface mounted installation
Integrated ACB (Advanced Communication Bus) bus interface with
Modbus protocol
Low running noises thanks to the innovative acoustic decoupling of the
drive components
»
The drive is integrated directly via open bus communication through the
ACB (Advanced Communication Bus), e.g. in a building management
system
»
»
Direct control via 230 V AC
Universal bracket sets for installation of all commonly available profile
systems
Potential drive options
+
BSY
ACB
C
You can find the explanations for the icons on the last page
We reserve the right to make changes.
©2018 D+H Mechatronic AG, Ammersbek
Pressure load diagram
Dimensions
All specifications in mm
Permanent
Option 400 N
23
400
303
300
50
250
39
200
625
100
0
322
30
35
0
100 200 300 400 500 600 700 800 900
Stroke / mm
Technical data
Approvals / Certificates
Find out about permission details from your D+H Partner
Duty cycle
30 %
Force of pressure
Tensile force
250 N
EN 12101-2
250 N
5014068.17002-1
Nominal locking force
Service life
1500 N
20000 double strokes *
6.7 mm/s
OPEN running speed
OPEN running speed ‑ SHEV
CLOSED running speed
Type of protection
Emission sound pressure level
Temperature range
Housing
13.6 mm/s
6.7 mm/s
IP 32
LpA ≤ 35 dB(A)
‑5 °C ... +75 °C
Aluminium
Surface
Powder‑coated
White aluminium (~ RAL 9006)
2.5 m silicone cable
625 x 30 x 35 mm
1.40 kg
Colour
Connection
W x H x D
Weight
* For vertical use, please consult with D+H Sales!
Design
Type
Art. No.
Supply
Performance
Stroke
Remark
230 V AC / +10 % ... ‑15 % / 50 Hz
230 V AC / +10 % ... ‑15 % / 50 Hz
24 V DC / 15 % / 0.ꢀ A
CDC‑0252‑0500‑5‑ACB M1‑R
CDC‑0252‑0500‑5‑ACB M2‑R
CDC‑0252‑0500‑1‑ACB S1‑L ON
CDC‑5‑ACB
26.105.55
26.105.56
26.105.61
26.105.00
33 W / 45 VA
64 W / 90 VA
500 mm
500 mm
500 mm
Right type
Right type
Left type, without power supply unit
Variable equipment possible
Brackets are not included and have to be ordered separately.
Status 01/2018
HS “High-Speed”
In the case of SHEV, the high-speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs
quietly and quickly, as usual.
Function programming
Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP, BSY or
BSY+ electronics.
BRV signal
Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41
and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not
isolated.
ACB (Advanced Communication Bus)
ACB
C
Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com-
munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB-capable control panel or enables it to be
directly connected to higher-level controllers such as a building management system.
BSY+ (synchronisation of drives)
+
BSY
In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each
other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD-BSY+).
SGI signal (position reporting)
%
100
In combination with the D+H servo plug-in unit SE 622, the drives can be controlled with perfect positioning.
0
SKS (closing edge protection)
Drive option, which enables an anti-trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ).
Audible signal (corresponding to protection class)
AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc-
tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining
stroke of 28 mm.
End position message (OPEN / CLOSED)
Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in.
Mechanical adjustment
Drive option for adjusting the overall length or design (e.g.: centred chain outlet).
SBD side bow chain
Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable).
SBU side bow chain
Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable).
©2020 ICPDF网 联系我们和版权申明