CDC-0252-0800-5-ACB [DH]

Chain drives;


型号：	CDC-0252-0800-5-ACB
厂家：	D+H Mechatronic AG
描述：	Chain drives
文件：	总3页 (文件大小：405K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CDC Series Chain drives

CDC-0252-0800-5-ACB

230 V AC

Performance features

Can be used for openings for smoke exhaust; D+H Euro SHEV in

accordance with EN 12101‑2; and for daily ventilation

Flexible overall lengths for customised strokes

Available in all RAL colours

Perfectly suited for profile integrated and surface mounted installation

Integrated ACB (Advanced Communication Bus) bus interface with

Modbus protocol

Low running noises thanks to the innovative acoustic decoupling of the

drive components

The drive is integrated directly via open bus communication through the

ACB (Advanced Communication Bus), e.g. in a building management

system

Direct control via 230 V AC

Universal bracket sets for installation of all commonly available profile

systems

Potential drive options

BSY

ACB

You can find the explanations for the icons on the last page

We reserve the right to make changes.

Pressure load diagram

Dimensions

All specifications in mm

Permanent

Option 400 N

400

303

300

250

200

775

100

472

100 200 300 400 500 600 700 800 900

Stroke / mm

Technical data

Approvals / Certiﬁcates

Find out about permission details from your D+H Partner

Duty cycle

30 %

Force of pressure

Tensile force

250 N

EN 12101-2

250 N

5014068.17002-1

Nominal locking force

Service life

1500 N

20000 double strokes *

6.7 mm/s

OPEN running speed

OPEN running speed ‑ SHEV

CLOSED running speed

Type of protection

Emission sound pressure level

Temperature range

Housing

15 mm/s

6.7 mm/s

IP 32

LpA ≤ 35 dB(A)

‑5 °C ... +75 °C

Aluminium

Surface

Powder‑coated

White aluminium (~ RAL 9006)

2.5 m silicone cable

775 x 30 x 35 mm

1.80 kg

Colour

Connection

W x H x D

Weight

* For vertical use, please consult with D+H Sales!

Design

Type

Art. No.

Supply

Performance

Stroke

Remark

230 V AC / +10 % ... ‑15 % / 50 Hz

24 V DC / 15 % / 1 A

CDC‑0252‑0800‑5‑ACB M1‑R

CDC‑0252‑0800‑5‑ACB M2‑R

CDC‑0252‑0800‑1‑ACB S1‑L ON

CDC‑5‑ACB

26.107.05

26.107.06

26.107.11

26.105.00

33 W / 45 VA

64 W / 90 VA

800 mm

Right type

Left type, without power supply unit

Variable equipment possible

Brackets are not included and have to be ordered separately.

Status 01/2018

HS “High-Speed”

In the case of SHEV, the high-speed function is used for reliably reaching the defined end position in 60 s. In daily ventilation mode, the drive runs

quietly and quickly, as usual.

Function programming

Option for customised configuring of drive parameters (e.g. stroke) via software and associated service tools for drives equipped with PLP, BSY or

BSY+ electronics.

BRV signal

Acknowledgement from the drive, via a control cable, to confirm that it has been completely extended or retracted. When used with the AT 41

and ERM 44 modules, this signal is sent to the central building control system, the modules themselves, or to the lock drive. The BRV signal is not

isolated.

ACB (Advanced Communication Bus)

ACB

Enables direct bus communication between the controller and the drive for, for example, control with perfect positioning or drive feedback. Com-

munication is via the open source Modbus protocol, and it enables the drive to be combined with an ACB-capable control panel or enables it to be

directly connected to higher-level controllers such as a building management system.

BSY+ (synchronisation of drives)

BSY

In addition to providing the same synchronisation function as BSY, BSY+ enables different components in the window to communicate with each

other. For example, the chain drives, during synchronous operation, or the window and lock drives (e.g. FRA 11 BSY+ or VLD-BSY+).

SGI signal (position reporting)

100

In combination with the D+H servo plug-in unit SE 622, the drives can be controlled with perfect positioning.

SKS (closing edge protection)

Drive option, which enables an anti-trap strip or presence detector to be connected directly to the drive (terminal resistor 5.6 kΩ).

Audible signal (corresponding to protection class)

AS2 corresponding to “Protection class 2” in accordance with ZVEI risk assessment through an audible warning signal in the “CLOSED” running direc-

tion. AS3 corresponding to “Protection class 3” in accordance with ZVEI risk assessment, in addition to AS2, stops the drive for 11 s with a remaining

stroke of 28 mm.

End position message (OPEN / CLOSED)

Drive feedback via an integrated isolated switching contact. This happens if the chain / rack and pinion has moved completely out or in.

Mechanical adjustment

Drive option for adjusting the overall length or design (e.g.: centred chain outlet).

SBD side bow chain

Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable).

SBU side bow chain

Drive chain with rigid backing, bends in the direction of the hinge. Drive is fixed in place (not rotatable).

相关型号：