首页 |元器件品牌

860-2R02-001 [DIALIGHT]

SafeSit? LED Signaling for Hazardous Locations; SafeSit ？ LED信令危险场所
860-2R02-001
型号： 860-2R02-001
厂家： Dialight Corporation    Dialight Corporation
描述：

SafeSit? LED Signaling for Hazardous Locations
SafeSit ？ LED信令危险场所

显示器 光电
文件： 总8页 (文件大小：422K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Application:  
Dialight's L864 LED Based Class I, Division 2 certified medium intensity  
red beacon was designed to easily interface into existing systems or to  
be provided as a red lighting fixture for new installations. The beacon is  
used to mark any obstacle that may provide hazards to aircraft  
navigation. Versions of this fixture are available in 120VAC or 230VAC.  
US Patent # 7,281,821  
SafeSite® L-864 Red LED Medium  
Intensity Beacon  
Mechanical Information:  
Container Dimensions: 24” X 24” X 24”  
610mm x 610mm x 610mm  
Container Weight:  
Mounting:  
32lbs (12.70 kg)  
Electrical specifications:  
Current (Amps):  
0.4 / 0.2  
48 W  
Power Consumption:  
(nom)  
Operating Temp:  
Power Factor:  
Material:  
-40ºF to +133ºF (-40ºC to +55ºC)  
> 0.9  
Dimensions in Inches [mm]  
Housing:  
Cast aluminum  
Polycarbonate  
Certifications & Ratings:  
Lens:  
w Class I, Div 2, Groups A, B, C, D hazardous environments T5 rated  
w ATEX certified, equipment group II (surface industries), category 3  
(Zone 2), T4 rated  
Accessories (Hardware): Stainless steel  
w FAA AC No. 150/5345-43F  
w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004),  
DGAC Mexico  
w Canadian Aviation Regulation CAR 621.9 (Transport Canada)  
w IP66 / NEMA 4X rated  
Mounting Information  
w ETL Listed in compliance with UL1598 and UL844for use in Class I,  
Div 2 hazardous locations  
Features & Benefits:  
w Uses 90% less energy than an incandescent  
w Resistant to shock and vibration  
w Lasts years longer than an incandescent  
w Flash or steady burn  
w 5 year warranty  
Order Codes:  
Class 1, Div 2 Beacon  
D164-B13-001  
D264-D13-001  
Class I, Div 2 120/230 VAC Beacon  
ATEX Beacon  
Beacon Bottom View  
ATEX 120/230 VAC Beacon  
2
www.dialight.com  
Application:  
LED Based L810 Red Obstruction light certified to meet both the  
rigorous FAA requirements for red LED obstruction lights and Class I,  
Division 2 for hazardous area lighting locations. It is available in 120VAC  
or 230VAC versions and can be ordered as single or dual units.  
US Patent # 6,425,678  
SafeSite® L-810 Red LED Obstruction Lights  
Mechanical Information:  
Single Units:  
Shield  
Shield  
Container Dimensions: 16” X 9” X 8”  
406mm x 229mm x 203mm  
Lens  
Assembly  
14.77  
[375.2]  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Lens  
11.21  
[284.6]  
REF  
11.77  
[298.9]  
REF  
Assembly  
14.21  
[360.8]  
Threaded 1” NPT and 3/4” NPT  
bottom hub for mounting  
Dual Units:  
BI-DIRECTIONAL  
WIRE HOUSING  
Dual Wire  
Housing  
Container Dimensions: 22” X 17” X 9”  
559mm x 432mm x 229mm  
5.79 [147]  
REF  
15.54  
[394.7]  
Container Weight:  
Mounting:  
16.06 lbs (7.28 kg)  
Dimensions in Inches [mm]  
Threaded 1” NPT and 3/4” NPT  
bottom hub for mounting  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated  
w ATEX certified, equipment group II (surface industries), category 3  
(Zone 2), T4 rated  
w FAA AC No. 150/5345-43F  
w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004),  
DGAC Mexico  
w Canadian Aviation Regulation CAR 621.9(Transport Canada)  
w ETL Listed in compliance with UL1598 and UL844 for use in Class I,  
Div 2 hazardous locations  
Electrical specifications: (Per Light):  
Volt Amps:  
44 VA (120 VAC Units)  
67 VA (230 VAC Units)  
Input Power:  
14.5 W (120 VAC Units)  
16.0 W (230 VAC Units)  
Operating Temp:  
Material:  
-67ºF to +131ºF (-55ºC to +55ºC)  
w IP65 / IP66 / NEMA 4X rated  
Features & Benefits:  
Housing:  
Cast aluminum  
Glass  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
Lens:  
w Available as a single or dual unit  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
Accessories (Hardware): Stainless steel  
w Flash or steady burn  
w Will withstand wind in excess of 150 mph (240 kph), salt fog  
w 5 year warranty  
Order Codes:  
Class 1, Div 2 Units  
ATEX Units  
860-2R01-001  
860-2R02-001  
860-2R01-002  
860-2R02-002  
Class I, Div 2 120 VAC, Single Unit  
Class I, Div 2 230 VAC, Single Unit  
Class I, Div 2 120 VAC, Dual Unit  
Class I, Div 2 230 VAC, Dual Unit  
860-9R01-001  
ATEX 120 VAC, Single Unit  
ATEX 230 VAC, Single Unit  
ATEX 120 VAC, Dual Unit  
ATEX 230 VAC, Dual Unit  
860-9R02-001  
860-9R01-002  
860-9R02-002  
3
www.dialight.com  
Application:  
Dialight's steady burn LED Based Class I, Division 2 Visual Signals are used  
in a wide range of industries for visual indication in hazardous  
environments. Versions of this fixture are available in 120VAC or 230VAC.  
US Patent # 6,425,678  
SafeSite® 860 Series LED Steady  
Burn Visual Signal Lights  
Mechanical Information:  
Single Units:  
Container Dimensions: 16” X 9” X 8”  
Shield  
Shield  
406mm x 229mm x 203mm  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Lens  
Threaded 1” NPT and 3/4” NPT  
bottom hub for mounting  
Assembly  
Lens  
Assembly  
14.21  
[360.8]  
14.77  
[375.2]  
11.21  
[284.6]  
REF  
11.77  
[298.9]  
REF  
Dual Units:  
Container Dimensions: 22” X 17” X 9”  
559mm x 432mm x 229mm  
Dual Wire  
Housing  
BI-DIRECTIONAL  
WIRE HOUSING  
Container Weight:  
Mounting:  
16.06 lbs (7.28 kg)  
5.79 [147]  
REF  
15.54  
[394.7]  
Threaded 1” NPT and 3/4” NPT  
bottom hub for mounting  
Dimensions in Inches [mm]  
Electrical specifications: (Per Light):  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated  
w ATEX certified, equipment group II (surface industries), category 3  
(Zone 2), T4 rated  
w IP65 / IP66 / NEMA 4X rated  
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div  
Volt Amps:  
44 VA (120 VAC Units)  
67 VA (230 VAC Units)  
Input Power:  
14.5 W (120 VAC Units)  
16.0 W (230 VAC Units)  
2 hazardous locations  
Operating Temp:  
Material:  
-67ºF to +131ºF (-55ºC to +55ºC)  
Features & Benefits:  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
w Available as a single or dual unit  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
Housing:  
Cast aluminum  
Glass  
Lens:  
Accessories (Hardware): Stainless steel  
w 5 year warranty  
Order Codes:  
Class I, Div 2 - Single Units  
Class I, Div 2 - Dual Units  
860-2R01-001  
860-2W01-001  
860-2G01-001  
860-2Y01-001  
860-2B01-001  
860-2R02-001  
860-2W02-001  
860-2G02-001  
860-2Y02-001  
860-2B02-001  
Class I, Div 2 Red 120 VAC  
Class I, Div 2 White 120 VAC  
Class I, Div 2 Green 120 VAC  
Class I, Div 2 Yellow 120 VAC  
Class I, Div 2 Blue 120 VAC  
Class I, Div 2 Red 230 VAC  
Class I, Div 2 White 230 VAC  
Class I, Div 2 Green 230 VAC  
Class I, Div 2 Yellow 230 VAC  
Class I, Div 2 Blue 230 VAC  
860-2R01-002  
860-2W01-002  
860-2G01-002  
860-2Y01-002  
860-2B01-002  
860-2R02-002  
860-2W02-002  
860-2G02-002  
860-2Y02-002  
860-2B02-002  
Class I, Div 2 Red 120 VAC  
Class I, Div 2 White 120 VAC  
Class I, Div 2 Green 120 VAC  
Class I, Div 2 Yellow 120 VAC  
Class I, Div 2 Blue 120 VAC  
Class I, Div 2 Red 230 VAC  
Class I, Div 2 White 230 VAC  
Class I, Div 2 Green 230 VAC  
Class I, Div 2 Yellow 230 VAC  
Class I, Div 2 Blue 230 VAC  
ATEX versions available - consult factory  
4
www.dialight.com  
Application:  
Dialight’s flat base junction box allows versatility of mounting and  
installation. It’s flat bottom base design creates the ability to mount the  
visual signal against level surfaces such as walls, ceilings and platforms.  
SafeSite® 860 Series LED Visual Signal  
Lights w/ Flat Base Junction Box  
Mechanical Information:  
Container Dimensions: 16” X 9” X 8”  
406mm x 229mm x 203mm  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Threaded 1” NPT on 4 sides and 1  
on bottom  
Electrical specifications:  
Volt Amps:  
44 VA (120 VAC Units)  
11.34  
[288.2]  
Input Power:  
Operating Temp:  
Material:  
14.5 W (120 VAC Units)  
-67ºF to +131ºF (-55ºC to +55ºC)  
2.25  
[57.15]  
Housing:  
Cast aluminum  
Glass  
Ø 6.60 [167.6]  
Lens:  
Dimensions in Inches [mm]  
Accessories (Hardware): Stainless steel  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments (pending)  
w IP65 / IP66 / NEMA 4X rated  
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div  
2 hazardous locations  
Features & Benefits:  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
w 5 year warranty  
Order Codes:  
Class I, Div 2 - Single Units  
860-2R01-005  
860-2Y01-005  
860-2B01-005  
Class I, Div 2 Red 120 VAC - Flat Base  
Class I, Div 2 Yellow 120 VAC - Flat Base  
Class I, Div 2 Blue 120 VAC - Flat Base  
5
www.dialight.com  
Application:  
Dialight's newest addition to their line of Class I, Division 2 Visual Signal  
Lights, the FLS Series Flashing Signals are used in a wide range of  
industries for visual indication in hazardous environments. Versions of this  
fixture are available in 120VAC or 230VAC.  
US Patent # 6,425,678  
SafeSite® FLS Series LED  
Flashing Visual Signal Lights  
Shield  
Lens  
Assembly  
Mechanical Information:  
Container Dimensions: 16” X 9” X 8”  
11.21  
[284.6]  
REF  
11.77  
406mm x 229mm x 203mm  
[298.9]  
REF  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Threaded 1” NPT and 3/4” NPT  
bottom hub for mounting  
BI-DIRECTIONAL  
WIRE HOUSING  
5.79 [147]  
REF  
Electrical specifications:  
Volt Amps:  
44 VA (120 VAC Units)  
67 VA (230 VAC Units)  
Dimensions in Inches [mm]  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated  
w IP66 / NEMA 4X rated  
Input Power:  
14.5 W (120 VAC Units)  
16.0 W (230 VAC Units)  
Operating Temp:  
Material:  
-67ºF to +131ºF (-55ºC to +55ºC)  
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div  
2 hazardous locations  
Features & Benefits:  
Housing:  
Cast aluminum  
Glass  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
w Available as a single unit  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
w 5 year warranty  
Lens:  
Accessories (Hardware): Stainless steel  
Order Codes:  
Class I, Div 2 - Single Units  
FLS-2R01-001  
Class I, Div 2 Red 120 VAC  
Class I, Div 2 White 120 VAC  
Class I, Div 2 Green 120 VAC  
Class I, Div 2 Yellow 120 VAC  
Class I, Div 2 Blue 120 VAC  
Class I, Div 2 Red 230 VAC  
Class I, Div 2 White 230 VAC  
Class I, Div 2 Green 230 VAC  
Class I, Div 2 Yellow 230 VAC  
Class I, Div 2 Blue 230 VAC  
FLS-2W01-001  
FLS-2G01-001  
FLS-2Y01-001  
FLS-2B01-001  
FLS-2R02-001  
FLS-2W02-001  
FLS-2G02-001  
FLS-2Y02-001  
FLS-2B02-001  
ATEX versions available - consult factory  
6
www.dialight.com  
Application:  
Dialight’s flat base junction box allows versatility of mounting and  
installation. It’s flat bottom base design creates the ability to mount the  
flashing signal against level surfaces such as walls, ceilings and platforms.  
SafeSite® FLS Series LED Flashing Signal  
Lights w/ Flat Base Junction Box  
Mechanical Information:  
Container Dimensions: 16” X 9” X 8”  
406mm x 229mm x 203mm  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Threaded 1” NPT on 4 sides and 1  
on bottom  
Electrical specifications:  
Volt Amps:  
44 VA (120 VAC Units)  
11.34  
[288.2]  
Input Power:  
Operating Temp:  
Material:  
14.5 W (120 VAC Units)  
-67ºF to +131ºF (-55ºC to +55ºC)  
2.25  
[57.15]  
Housing:  
Cast aluminum  
Glass  
Ø 6.60 [167.6]  
Lens:  
Dimensions in Inches [mm]  
Accessories (Hardware): Stainless steel  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments (pending)  
w IP65 / IP66 / NEMA 4X rated  
Features & Benefits:  
w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div  
2 hazardous locations  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
w 5 year warranty  
Order Codes:  
Class I, Div 2 - Single Units  
FLS-2R01-005  
FLS-2Y01-005  
FLS-2B01-005  
Class I, Div 2 Red 120 VAC - Flat Base  
Class I, Div 2 Yellow 120 VAC - Flat Base  
Class I, Div 2 Blue 120 VAC - Flat Base  
7
www.dialight.com  
Application:  
Dialight's newest addition to their line of Class I, Division 2 Visual Signal  
Lights, the FLS Series Flashing Signals are used in a wide range of  
industries for visual indication in hazardous environments. The FLS series  
incorporates a 4 wire connection for incorporation into a DC supervised  
alarm systems.  
Mechanical Information:  
US Patent # 6,425,678  
Container Dimensions: 16” X 9” X 8”  
SafeSite® FLS Series LED  
406mm x 229mm x 203mm  
Flashing Visual Signal Lights  
for Supervised Alarm Systems  
Container Weight:  
Mounting:  
7.14 lbs (3.24 kg)  
Threaded 1” NPT  
Electrical specifications:  
Operating Voltage:  
Input Power:  
12-48 VDC (nom)  
1.5 W  
Operating Temp:  
On:Off Time:  
-40°C to +65°C  
100:900ms  
Certifications & Ratings:  
w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated  
w Certified to UL844 / UL1598A / DL1598  
w IP66 / NEMA 4X rated  
Material:  
Housing:  
Powder coated cast aluminum  
Glass  
Features & Benefits:  
w Uses 90% less energy than an incandescent  
w Weather/corrosion resistant lamp assembly and housing  
w Resistant to shock and vibration  
w Unique optically designed lens to enhance LED operation and  
provide 360º visibility  
Lens:  
Hardware:  
Stainless steel  
Included Accessories:  
Threaded 3/4” NPT reducer  
Threaded 1” NPT plug  
Stainless steel cage  
w 5 year warranty  
Order Codes:  
Class I, Div 2 - Single Units  
11.18  
[289.9]  
REF  
FLS-2R09-001  
FLS-2W09-001  
FLS-2G09-001  
FLS-2Y09-001  
FLS-2B09-001  
Red  
White  
Green  
Yellow  
Blue  
Ø5.79  
[147.0]  
REF  
Dimensions in Inches [mm]  
Dialight reserves the right to make changes at any time in order to supply the best product possible.  
The most current version of this document will always be available at:  
http://www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFSFSTBROCHURE.pdf  
MDTFSFSTBROCHURE_D  
8
www.dialight.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明