AH1801-SN-7 [DIODES]

Hall Effect Sensor, 1mT Min, 6mT Max, 0.10-0.30V, Square, Surface Mount, GREEN, DFN2020-6;
AH1801-SN-7
型号: AH1801-SN-7
厂家: DIODES INCORPORATED    DIODES INCORPORATED
描述:

Hall Effect Sensor, 1mT Min, 6mT Max, 0.10-0.30V, Square, Surface Mount, GREEN, DFN2020-6

传感器 换能器
文件: 总7页 (文件大小:96K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
General Description  
Features  
AH1801 is a Micropower, Ultra-sensitive Hall Effect Switch, which  
is with two Hall effect plates and a output driver, mainly designed  
for battery–operation, hand-held equipment (such as Cellular and  
Cordless Phone, PDA). The total operation power is down to  
Micropower operation  
Operation with North or South Pole  
2.5V to 5.5V battery operation  
Inverted Output-on without Magnet present  
Chopper stabilized  
24uW in the 3V supply.  
Superior temperature stability  
Either north or south pole of sufficient strength will turn the output  
off. The output will be turned on under no magnetic field.  
While the magnetic flux density (B) is larger than operate point  
(Bop), the output will be turned off, the output is held until B is  
lower than release point (Brp), then turned on.  
Extremely Low Switch-Point Drift  
Insensitive to Physical Stress  
Good RF noise immunity  
-40°C to 85°C operating temperature  
Low profile 3 pin SC59 and DFN2020-6 package  
ESD (HBM) 5KV for DFN2020-6  
6KV for SC59-3L  
Lead Free Finish / RoHS Compliant  
SC59 and DFN2020-6: Available in “Green” Molding  
Compound (No Br, Sb)  
Applications  
Cellular phone  
PDA  
Cordless phone  
Ordering Information  
X
AH1801 - XX X  
Packing  
Package  
Lead Free  
G : Green  
W : SC59  
SN : DFN2020-6  
-7 : Taping  
Note:  
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.  
Packaging  
(Note 2)  
SC59  
7” Tape and Reel  
Device  
Package Code  
Quantity  
Part Number Suffix  
AH1801-W  
AH1801-SN  
W
3000/Tape & Reel  
-7  
SN  
DFN2020-6  
3000/Tape & Reel  
-7  
Note:  
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at  
http://www.diodes.com/datasheets/ap02001.pdf.  
AH1801 Rev. 2  
1 of 7  
MAY 2007  
www.diodes.com  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
Pin Assignment  
(1) SC59  
(2) DFN2020-6  
1. Vdd  
3. Output  
NC  
3.  
Output  
GND 2.  
1 . Vdd  
(Top View)  
NC  
NC  
2. GND  
(Bottom view )  
Note:  
3. NC is “No Connection”, which is recommended to be tied to ground.  
Pin Descriptions  
Name P/I/O Pin #  
Description  
Power Supply Input  
Ground  
Vdd  
GND  
P/I  
P/I  
O
1
2
3
Output  
Output Pin  
Block Diagram  
Vdd  
1
Power  
switch  
Hall Plate  
Output  
Latch  
Amp  
Amp  
3
GND  
Logical  
2
Hall Plate  
Latch  
AH1801 Rev. 2  
2 of 7  
www.diodes.com  
MAY 2007  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
Typical Circuit  
2.5~5.5V  
RL  
Output  
AH1801  
Gnd  
Absolute Maximum Ratings (at TA= 25°C)  
Symbol  
Characteristics  
Values  
Unit  
Vdd  
B
Supply voltage  
Magnetic flux density  
7
V
Unlimited  
Ta  
Ts  
PD  
Tj  
Operating Temperature Range  
Storage Temperature Range  
Package Power Dissipation  
Maximum Junction Temp  
-40 to +85  
-65 to +150  
230  
°C  
°C  
mW  
SC59/DFN2020-6  
150  
°C  
Recommended Operating Conditions ( TA= 25°C )  
Symbol  
Paramter  
Conditions  
Rating  
Unit  
Vdd  
Supply Voltage  
Operating  
2.5~5.5  
V
Electrical Characteristics ( TA = +25°C, Vdd = 3V ;unless other wise specified)  
Symbol  
Characteristic  
Output On Voltage  
Output Leakage Current  
Conditions  
Min  
Typ  
Max  
Unit  
Vout  
Ioff  
Iout=1mA  
-
-
-
-
-
-
-
-
0.1  
<0.1  
3
5
8
75  
75  
0.1  
0.3  
1
6
10  
16  
125  
125  
-
V
Vout=5.5V, B < Brp  
Chip enable  
Chip disable  
µA  
mA  
uA  
uA  
µs  
Idd(en)  
Idd(dis)  
Idd(avg)  
Tawake  
Tperiod  
D.C.  
Supply Current  
average supply current  
Awake Time  
Period  
Duty Cycle  
ms  
%
AH1801 Rev. 2  
3 of 7  
MAY 2007  
www.diodes.com  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
Magnetic Characteristics (TA=25°C, Vdd=3V)  
(1mT=10 Gauss)  
Symbol  
Characteristic  
Min  
Typ  
Max  
Unit  
Bops(south pole to brand side)  
Bopn(north pole to brand side)  
Brps(south pole to brand side)  
Brpn(north pole to brand side)  
Operate Point  
-
-60  
10  
-
40  
-40  
30  
60  
-
-
Release Point  
Gauss  
-30  
-10  
Bhy( Bopx Brpx )  
Hysteresis  
-
10  
-
Note:  
4. Typical data is at TA=25 °C, Vdd=3V, and for design information only.  
5. Operate point and release point will vary with supply voltage and operating temperature.  
Output ( Voltage )  
( off-state )  
Turn off  
Turn  
on  
Turn  
on  
Turn off  
( on-state )  
-B  
Bopn Brpn  
Brps Bops  
+B  
Magnetic  
Performance Characteristics  
(1) SC59 / DFN2020-6  
25  
50  
60  
70  
80  
85  
90  
100 110 120 130 140 150  
TA (°C)  
230 184 166 147 129 120 110  
92  
74  
55  
37  
18  
0
PD (mW)  
PD (m W )  
Pow er D issipation C urve  
300  
200  
100  
0
0
25  
50  
75  
100  
125  
150  
TA (C )  
85  
AH1801 Rev. 2  
4 of 7  
www.diodes.com  
MAY 2007  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
Marking Information  
(1) SC59  
(Top View)  
XX : KB : AH1801  
Y : Year 0~9  
M : Month A~L  
XX Y M X  
: Internal code  
A~Z : Green  
X
Part Number  
Package Identification Code  
SC59 KB  
AH1801  
(2) DFN2020-6  
(Top View)  
Pin 1  
XX : KB : AH1801  
X X  
: Year (0~9)  
: Month A~L  
: Internal code  
A~Z : Green  
Y
M
X
Y
M X  
Part Number  
Package Identification Code  
AH1801  
DFN2020-6  
KB  
AH1801 Rev. 2  
5 of 7  
MAY 2007  
www.diodes.com  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
Package Information ( unit: mm )  
(1) SC59  
0.35/0.50  
2.70/  
3.00  
TOP VIEW  
1.90  
2.90/3.10  
1.00/  
1.30  
0.10/0.20  
0.013/0.10  
0.95  
0.35/0.55  
0°/8°  
(2) DFN2020-6  
Marking  
0.05 C  
0.08 C  
(Active area depth)  
Seating plane  
C
Pin#1 ID  
1.95/2.075  
1.45/1.65  
Sensor location  
A
B
0.15 C  
2x-  
0.65nom.  
0.2/0.3  
0.05  
M C A B  
Bottom View  
AH1801 Rev. 2  
6 of 7  
www.diodes.com  
MAY 2007  
© Diodes Incorporated  
AH1801  
MICROPOWER OMNIPOLAR, ULTRA-SENSITIVE HALL  
EFFECT SWITCH  
IMPORTANT NOTICE  
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further  
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither  
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will  
agreeto hold DiodesIncorporatedand all the companieswhose productsare represented onour website, harmlessagainst all damages.  
LIFE SUPPORT  
Diodes Incorporated productsare notauthorizedfor use ascriticalcomponentsin lifesupportdevices or systemswithout theexpressed written approval ofthe  
PresidentofDiodesIncorporated.  
AH1801 Rev. 2  
7 of 7  
MAY 2007  
www.diodes.com  
© Diodes Incorporated  

相关型号:

AH1801-SNG-7

MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
DIODES

AH1801-WG-7

MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
DIODES

AH1801_09

MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
DIODES

AH1802

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH
DIODES

AH1802-FJG-7

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1802-FJG-7-01

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1802-FY4G-7

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1802-SNG-7

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1802-WG-7

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1802_10

MICROPOWER, ULTRA-SENSITIVE OMNIPOLAR
DIODES

AH1803

MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH
DIODES

AH1803-SNG-7

MICROPOWER, ULTRA-SENSITIVE HALL EFFECT
DIODES