E1125AA-125.000M-175 [ECLIPTEK]

CRYSTAL OSCILLATOR, CLOCK, 125 MHz, ECL OUTPUT, DIP-14/4;


型号：	E1125AA-125.000M-175
厂家：	Ecliptek
描述：	CRYSTAL OSCILLATOR, CLOCK, 125 MHz, ECL OUTPUT, DIP-14/4 输出元件
文件：	总2页 (文件大小：73K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Marketing Bulletin

DATE: May 6, 2005

TO:

All Sales Personnel

FROM: Mark Stoner

RE:

E11 (OS/03) Termination

To all concerned parties,

This bulletin is to notify all customers of the discontinuation of the following Ecliptek

series effective May 1^st, 2005:

Series

Description

Recommended Replacement

E11

5V 14 pin DIP ECL Oscillator

None

In compliance with our End of Life (EOL) policy, this will serve as advanced notice of

product termination. New orders will not be accepted after August 1^st, 2005, with

delivery to conclude by November 1^st2005.

If there are any questions pertaining to this bulletin, please fell free to contact me.

Thank you again for your cooperation.

Best Regards,

Mark W. Stoner

Director of Marketing

Ecliptek Corporation

3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234

STANDARD SPECIFICATIONS

Frequency Range:

6.000MHz to 155.520MHz

Frequency Tolerance/Stability:

(All Values Inclusive of Operating Temp. Range, Supply Voltage, and Load)

±100ppm Max.

±50ppm Max.

±25ppm Max. (0°C to +70°C only), (less than or equal to 125.000MHz only)

Operating Temperature Range

Blank

0°C to +70°C

-40°C to +85°C

-55°C to +125°C

Storage Temperature Range

OBSOLETE

Supply Voltage (V

Input Current

)

-5.2Vdc ±5% (AA, AB, and AM); +5.2Vdc ±5% (AC)

140mA Maximum

-1.0Vdc Min./-0.7Vdc Max. (AA, AB, and AM); 4.0Vdc Min./4.5VdcMax. (AC)

-1.95Vdc Min./-1.60Vdc Max. (AA, AB, and AM); 3.00Vdc Min./3.42Vdc Max. (AC)

2nSec Maximum (Measured at 20% to 80% of waveform)

50% ±10% (Measured at 50% of waveform)

Output Voltage Logic High

Output Voltage Logic Low

Rise/Fall Time

Duty Cycle

Load Drive Capability

Aging @ 25°C

50 Ohms into -2.0Vdc (AA, AB, and AM); 50 Ohms into +3.0Vdc (AC)

±5ppm/year Maximum

ENVIRONMENTAL & MECHANICAL

Fine Leak Test:

MIL-STD-883, Method 1014, Condition A

MIL-STD-883, Method 1014, Condition C

MIL-STD-202, Method 213, Condition C

MIL-STD-883, Method 2007, Condition A

MIL-STD-883, Method 2004

Solderability:

MIL-STD-883, Method 2002

Gross Leak Test:

Mechanical Shock:

Vibration:

Temperature Cycling:

Resistance to Soldering Heat:

Resistance to Solvents:

MIL-STD-883, Method 1010

MIL-STD-202, Method 210

MIL-STD-202, Method 215

Lead Integrity:

PIN CONFIGURATIONS

Ground/Case

-5.2V

No Connect or Complementary Output

-5.2V

Output

Ground/Case

Output

Ground/Case

Output

Ground

Ground/Case

+5.2Vdc

-5.2Vdc

PART NUMBERING GUIDE

E11 00 AM ET C - 24.000M - CL175

15.240

±0.203

0.9 MAX

Configuration Options

CLXXX = Cut Leads (MAL01-101-000)

G = Gull Wing (MAL01-001-000)

Frequency

7.620

±0.203

Pin 1 Connection

Blank = No Connect

Æ0.457

±0.1 (X4)

C = Complementary Output

Operating Temperature Range

Blank = 0°C to +70°C

ET = -40°C to +85°C

Pin Configuration

AA, AB, AC, or AM

Per Pin Configuration Table Above

5.08

MAX

13.2

MAX

Frequency Tolerance/Stability

00 = ±100ppm Maximum, 45 = ±50ppm Maximum

25 = ±25ppm Maximum

5.08

MIN

MARKING GUIDE

20.8 MAX

(Line #1) ECLIPTEK

(Line #2) E11 AM C

ALL DIMENSIONS

IN MILLIMETERS

Pin 1 Connection

Blank = No Connect

C = Complementary Output

SPECIFICATION CONTROL DRAWING

Drawing Number

Pin Configuration Per Pin Configuration Table Above

CSC01-010-000

(Line #3) XXX.XXXM

ECLIPTEK

E11AMC

XXX.XXXM

XXYZZ

Title

Frequency

FULL SIZE ECL OSCILLATOR

(Line #4) XX Y ZZ

Revision

Effectivity Date

Week of Year

08-27-03

Last Digit of Year

Ecliptek Manufacturing Code (TEN02-001-000)

ECN Number

PAGE 1 OF 2

8675

Released By

Date

Approved By

NOTE: Pin 1 shall be marked with a black dot. Marking shall

conform to conditions listed in TQC41-001-000.

相关型号：