E32J2F3C2A-155.520MTR [ECLIPTEK]
OSCILLATOR; 振荡器
| 型号： | E32J2F3C2A-155.520MTR |
| 厂家： | 
Ecliptek |
| 描述： | OSCILLATOR |
| 文件： | 总5页 (文件大小：240K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Marketing Bulletin
DATE: August 25, 2005
TO:
All Sales Personnel
FROM: Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective August 25th, 2005:
Series
E31J2
E32J2
Description
5V 6 pad SMD LVPECL VCXO
3.3V 6 pad SMD LVPECL VCXO
Recommended Replacement
E32D1
E32D1
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after November 25th, 2005, with
delivery to conclude by February 25th 2006.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
E31J2 Series
• 5.0V supply voltage
E31J2
• PECL Output VCXO
• 6 pad PCB SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complemenary Output available
H 5.9
L 14.8
W 0.2
OBSOLETE
• Available on Tape and Reel
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
5.0VDC 5ꢀ
100mA Maximum
100KH
Logic Type
Frequency Tolerance / Stability
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppmꢁ 25ppmꢁ or
Loadꢁ and Aging @25°C over 10 years
20ppm Maximum
Output Voltage Logic High (VOH
)
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enables Output
Additional Output / Logic Control
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
Absolute Pull Range (APR)
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppm Minimum
Loadꢁ and Aging @25°C over 10 years
Linearity
20ꢀꢁ 15ꢀꢁ or 10ꢀ Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
2.5VDC 2.0VDC
0.0VDC to VCC
2.5VDC
Positive Transfer Characteristic
50kOhms Typical
10kHz Minimum
Input Impedance
Modulation Bandwidth
at -3dB with Control Voltage of +2.5VDC
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
01/03
ECLIPTEK CORP.
OSCILLATOR
E31J2
6-PCB-J
5.0V
OS74
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
192
PART NUMBERING GUIDE
OBSOLETE
E31J2 F 3 A 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
APR
3= 50ppm Minimum
LINEARITY
A=20%
B=15%
DUTY CYCLE
1=50 10(%), 2=50 5(%)
C=10%
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TOP VIEW
SIDE VIEW
FRONT VIEW
Pin 1: Voltage Control Pin 4: Output
Pin 2: Enable/Disable or No Connect Pin 5: Complementary Output or No Connect
Pin 3: Case Ground
Pin 6: Supply Voltage
Tolerances = 0.1
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Integrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
Solderability
Marking Permanency
Shock
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Line 3: XX Y ZZ
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E31J2
6-PCB-J
5.0V
OS74
01/03
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
193
E32J2 Series
• 3.3V supply voltage
E32J2
• PECL Output VCXO
• 6 pad PCB SMD package with J-leads
• Stability to 20ppm
H
5.9
L 14.8
W 10.2
• Output Enable/Disable available
• Complemetary Output available
• Available oTape and Reel
OBSOLETE
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
3.3VDC 5ꢀ
75mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppmꢁ 25ppmꢁ or
Loadꢁ and Aging @25°C over 10 years
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enables Output
Additional Output / Logic Control
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
Absolute Pull Range (APR)
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppm Minimum
Loadꢁ and Aging @25°C over 10 years
Linearity
20ꢀꢁ 15ꢀꢁ or 10ꢀ Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
1.65VDC 1.35VDC
0.0VDC to VCC
1.65VDC
Positive Transfer Characteristic
50kOhms Typical
10kHz Minimum
Input Impedance
Modulation Bandwidth
at -3dB with Control Voltage of +1.65VDC
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
01/03
ECLIPTEK CORP.
OSCILLATOR
E32J2
6-PCB-J
3.3V
OS73
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
194
PART NUMBERING GUIDE
OBSOLETE
E32J2 F 3 A 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
APR
3= 50ppm Minimum
LINEARITY
A=20%
B=15%
DUTY CYCLE
1=50 10(%), 2=50 5(%)
C=10%
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TOP VIEW
SIDE VIEW
FRONT VIEW
Pin 1: Voltage Control Pin 4: Output
Pin 2: Enable/Disable or No Connect Pin 5: Complementary Output or No Connect
Pin 3: Case Ground
Pin 6: Supply Voltage
Tolerances = 0.1
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Integrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
Solderability
Marking Permanency
Shock
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Line 3: XX Y ZZ
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E32J2
6-PCB-J
3.3V
OS73
01/03
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
195
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明