EB71F71E08AN2-FREQ [ECLIPTEK]

OCXO, CLOCK, 1.544MHz - 44.736MHz, HCMOS OUTPUT, DIP-5;
EB71F71E08AN2-FREQ
型号: EB71F71E08AN2-FREQ
厂家: Ecliptek    Ecliptek
描述:

OCXO, CLOCK, 1.544MHz - 44.736MHz, HCMOS OUTPUT, DIP-5

机械 输出元件 石英晶振 恒温晶体振荡器
文件: 总2页 (文件大小:140K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EB71F71 Series  
EB71F71  
• Oven Controlled Crystal Oscillator (OCXO)  
• AT-Cut Crystal  
• HCMOS output  
• 5.0V supply voltage  
• 5 pin DIP package  
H 15.0  
L 25.5  
W 25.5  
• External control voltage option available  
• Stability to 30ppb  
OSCILLATOR  
ELECTRICAL SPECIFICATIONS  
Frequency Range  
1.544MHz to 44.736MHz  
Operating Temperature Range (OTR)  
Storage Temperature Range  
0°C to 50°C, 0°C to 70°C, or -20°C to 70°C  
-55°C to 125°C  
Supply Voltage (VDD  
)
5.0VDC 5ꢀ  
Frequency Tolerance / Stability  
vs. Initial Tolerance  
at Nominal VDD and VC, at 25°C  
at Nominal VDD and VC  
2.0ppm, 1.5ppm, 1.0ppm , 500ppb, or  
300ppb Maximum  
30ppb, 50ppb, 80ppb, 100ppb, 200ppb,  
280ppb, or 500ppb Maximum  
20ppb Maximum  
vs. Temperature Stability  
vs. Vdd  
VDD 5ꢀ  
vs. Load  
Vload 5ꢀ  
20ppb Maximum  
vs. Aging (1 Day)  
vs. Aging (1 Year)  
vs. Aging (10 Years)  
Crystal Cut  
after 72 Hours of Operation  
after 72 Hours of Operation  
after 72 Hours of Operation  
3.0ppb Maximum  
500ppb Maximum  
3.0ppm Maximum  
AT-Cut  
Warm Up Time  
Power Consumption  
to 500ppb of Final Frequency at 1 Hour at 25°C  
at Steady State, at 25°C  
3 Minutes Maximum  
2.2 Watts Maximum  
3.0 Watts Maximum  
VDD-0.5VDC Minimum  
0.5VDC Maximum  
During Warm Up, at 25°C  
Output Voltage Logic High (VOH  
Output Voltage Logic Low (VOL)  
Rise Time / Fall Time  
)
IOH = -8mA  
IOL = +8mA  
< 10.000MHz Measured at 20ꢀ to 80ꢀ of Waveform  
> 10.000MHz Measured at 20ꢀ to 80ꢀ of Waveform  
Measured at 50ꢀ of Waveform  
10 nSec Maximum  
6 nSec Maximum  
Duty Cycle  
50 5(ꢀ)  
Load Drive Capability  
Frequency Deviation  
Control Voltage Range  
Control Voltage (VC)  
Transfer Function  
Reference Voltage Output  
Linearity  
30pF HCMOS Load Maximum  
7ppm Minimum, 20ppm Maximum  
0.0VDC to VDD  
Referenced to FO at VC = 2.5VDC; VDD=5.0VDC over OTR  
2.5VDC 2.0VDC  
Positive Transfer Characteristic  
4.0VDC 0.3VDC  
10ꢀ Maximum  
Input Impedance  
10kOhms Typical  
Typical Phase Noise (at 12.800MHz) 1Hz Offset  
-75dBc/Hz  
10Hz Offset  
100Hz Offset  
1kHz Offset  
10kHz Offset  
-100dBc/Hz  
-130dBc/Hz  
-140dBc/Hz  
-150dBc/Hz  
MANUFACTURER  
CATEGORY  
SERIES  
PACKAGE  
VOLTAGE  
CLASS  
REV.DATE  
10/03  
ECLIPTEK CORP.  
OSCILLATOR  
EB71F71  
5 pin DIP  
5.0V  
OS2D  
800-ECLIPTEK www.ecliptek.com for latest revision  
Specifications subject to change without notice.  
PART NUMBERING GUIDE  
EB71F71 A 10 B V 2 - 20.000M  
INITIAL TOLERANCE  
A= 2.0ppm, B= 1.5ppm, C= 1.0ppm, D= 500ppb,  
E= 300ppb  
FREQUENCY  
DUTY CYCLE  
2=50% 5%  
FREQUENCY STABILITY  
2 Digit Code Per Table 1  
VOLTAGE CONTROL OPTION  
N=None (No Connect on Pin 3 and Pin 4)  
V=Voltage Control on Pin 3 and Reference  
Voltage Output on Pin 4  
OPERATING TEMPERATURE RANGE  
1 Letter Code Per Table 1  
MECHANICAL DIMENSIONS  
ALL DIMENSIONS IN MILLIMETERS  
Pin 1: Output  
Pin 2: Case/Ground  
Pin 3: No Connect or Voltage Control  
Pin 4: No Connect or Reference Voltage Output  
Pin 5: Supply Voltage  
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS  
MARKING SPECIFICATIONS  
Line 1: ECLIPTEK  
Line 2: XX.XXX M  
Characteristic  
Specification  
Gross Leak Test  
MIL-STD-883, Method 1014, Condition C  
MIL-STD-202, Method 213, Condition C  
MIL-STD-883, Method 2007, Condition A  
MIL-STD-883, Method 2004  
Mechanical Shock  
Vibration  
Lead Integrity  
Frequency in MHz  
(5 Digits Maximum + Decimal)  
Solderability  
MIL-STD-883, Method 2002  
MIL-STD-883, Method 1010  
MIL-STD-883, Method 210  
MIL-STD-883, Method 215  
Line 3: XX Y ZZ  
Temperature Cycling  
Resistance to Soldering Heat  
Resistance to Solvents  
Week of Year  
Last Digit of Year  
Ecliptek Manufacturing Identifier  
Note: Pin 1 shall be designated with a dot  
MANUFACTURER  
CATEGORY  
SERIES  
PACKAGE  
VOLTAGE  
CLASS  
REV.DATE  
10/03  
ECLIPTEK CORP.  
OSCILLATOR  
EB71F71  
5 pin DIP  
5.0V  
OS2D  
800-ECLIPTEK www.ecliptek.com for latest revision  
Specifications subject to change without notice.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY