EC3125B10-27.000M [ECLIPTEK]
VCXO, CLOCK, 27 MHz, HCMOS/TTL OUTPUT, ROHS COMPLIANT, METAL, DIP-14/4;
| 型号： | EC3125B10-27.000M |
| 厂家： | 
Ecliptek |
| 描述： | VCXO, CLOCK, 27 MHz, HCMOS/TTL OUTPUT, ROHS COMPLIANT, METAL, DIP-14/4 输出元件 石英晶振 压控振荡器 |
| 文件： | 总5页 (文件大小：197K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Marketing Bulletin
DATE: April 20th, 2010
TO:
FROM: Isaac Gonzalez
RE: Product Termination
All Sales Personnel
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective April 20th, 2010:
Series
Description
Recommended Replacement
EC31
RoHS Compliant (Pb-free) 5.0V 14 Pin DIP
Metal Thru-Hole HCMOS/TTL VCXO
EV31C3, EV31C6
EC31HS RoHS Compliant (Pb-free) 5.0V 8 Pin DIP Metal EV31C3, EV31C6
Thru-Hole HCMOS/TTL VCXO
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after September 1st, 2010, with
delivery to conclude by December 1st, 2010.
If there are any questions pertaining to this bulletin, please feel free to contact me.
Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez
Configuration Manager
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EC31 Series
EC31
• Voltage Controlled Crystal Oscillators (VCXO)
• HCMOS/TTL Output
• +5.0V Supply Voltage
H 5.08
L 20.8
W 13.2
• External Voltage Control Function
• Custom Lead Length & Gull Wing Options
• 14 pin DIP Metal Package
• RoHS Compliant (Pb-free)
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Aging (at 25°C)
1.000MHz to 155.520MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
5.0VDC 5%
5ppm / year Maximum
10TTL Load or 15pF CMOS Load Maximum
10 mSeconds Maximum
50ppm Minimum
Load Drive Capability
Start Up Time
Frequency Deviation /
Control Voltage
2.5VDC 2.0VDC Positive Transfer Characteristic,
2.5VDC 2.0VDC Positive Transfer Characteristic,
2.5VDC 2.0VDC Positive Transfer Characteristic,
2.5VDC 2.5VDC Positive Transfer Characteristic, or
100ppm Minimum
150ppm Minimum
200ppm Minimum
Linearity
20%, 15%, 10% Maximum, or
5% Maximum (not avail. w/ 200ppm Freq. Dev.)
20mA Maximum
Input Current
1.000MHz to 20.000MHz
20.001MHz to 30.000MHz
30.001MHz to 155.520MHz
Inclusive of Operating Temperature
Range, Supply Voltage, and Load
w/TTL Load
40mA Maximum
50mA Maximum
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Duty Cycle
100ppm, 50ppm, 25ppm, or
20ppm Maximum (0°C to 70°C only)
2.4VDC Minimum
VDD-0.5VDC Minimum
w/CMOS Load
0.4VDC Maximum
w/TTL Load
0.5VDC Maximum
w/CMOS Load
50 10(%) (Standard)
at 1.4VDC w/TTL Load; at 50% of Waveform
w/CMOS Load
50 5(%) (Optional)
5 nSeconds Maximum
at 1.4VDC w/TTL Load and w/CMOS Load
0.4VDC to 2.4VDC w/TTL Load; 20%
to 80% of Waveform w/CMOS Load
Freq. Deviation Options Blank, A or B
Freq. Deviation Options C
Rise Time / Fall Time
Period Jitter: Absolute
100pSeconds Max ≤44.736MHz
100pSeconds Max ≤30.000MHz
200pSeconds Max ꢀ30.000MHz
200pSeconds Max ꢀ44.736MHz
25pSeconds Max ≤44.736MHz
25pSeconds Max ≤30.000MHz
50pSeconds Max ꢀ30.000MHz
50pSeconds Max ꢀ44.736MHz
Freq. Deviation Options Blank, A or B
Freq. Deviation Options Blank, A or B
Freq. Deviation Options C
Period Jitter: One Sigma
Freq. Deviation options Blank, A or B
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC31
14 pin DIP
5.0V
OS13
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC31 00 T A 15 ET - 24.000M - G
FREQUENCY TOLERANCE / STABILITY
00= 100ppm Maximum
AVAILABLE OPTIONS
Blank=None
45= 50ppm Maximumꢀ ꢁ5= ꢁ5ppm Maximum
ꢁ0= ꢁ0ppm Maximum
CLXXX=Custom Lead Length
G=Full Size Gull Wing
DUTY CYCLE
Blank=50 10(%)ꢀ T=50 5(%)
FREQUENCY
OPERATING TEMP. RANGE
Blank=0°C to 70°C
ET=-40°C to 85°C
FREQUENCY DEVIATION
Blank= 50ppm Minimum
A= 100ppm Minimum
B= 150ppm Minimum
C= ꢁ00ppm Minimum (ꢁ.5VDC ꢁ.5VDC)
LINEARITY
Blank=ꢁ0% Maximum
05=5% Maximum
10=10% Maximum
15=15% Maximum
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
Pin 1: Control Voltage (VC)
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
Line 1: ECLIPTEK
Line ꢁ: EC31
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Series Designator
Characteristic
Seal Integrity
Specification
Line 3: XX.XXX M
Line 4: XX Y ZZ
Bubble test in Perfluorocarbon at +1ꢁ5°C 5°C for 60 seconds
minimum.
Frequency in MHz
(5 Digits Maximum + Decimal)
Solderability
Marking Permanency
Shock
Sn63 Solder dip at +ꢁ30°C 5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solventꢀ 3 times.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Random drop on hard wooden plate 3 times from a height
of ꢁ0cm.
Note: Pin 1 shall be designated with a dot
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for ꢁ hours minimum on
each axis (Xꢀ Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC31
14 pin DIP
5.0V
OS13
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
EC31 Series
EC31
• Voltage Controlled Crystal Oscillators (VCXO)
• HCMOS/TTL Output
• +5.0V Supply Voltage
• External Voltage Control Function
• Custom Lead Length & Gull Wing Options
• 8 pin DIP Metal Package
H
5.6
L 13.2
W 13.2
• RoHS Compliant (Pb-free)
OSCILLATOR
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Aging (at 25°C)
1.000MHz to 44.736MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
5.0VDC 5%
5ppm / year Maximum
10TTL Load or 15pF CMOS Load Maximum
10 mSeconds Maximum
50ppm Minimum
Load Drive Capability
Start Up Time
Frequency Deviation /
Control Voltage
2.5VDC 2.0VDC Positive Transfer Characteristic,
2.5VDC 2.0VDC Positive Transfer Characteristic,
2.5VDC 2.0VDC Positive Transfer Characteristic,
100ppm Minimum
150ppm Minimum
Linearity
20%, 15%, 10% Maximum, or
5% Maximum
Input Current
20mA Maximum
1.000MHz to 20.000MHz
20.0001MHz to 30.000MHz
30.001MHz to 44.736MHz
Inclusive of Operating Temperature
Range, Supply Voltage, and Load
w/TTL Load
40mA Maximum
50mA Maximum
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Duty Cycle
100ppm, 50ppm, 25ppm, or
20ppm Maximum (0°C to 70°C Only)
2.4VDC Minimum
VDD-0.5VDC Minimum
0.4VDC Maximum
w/CMOS Load
w/TTL Load
0.5VDC Maximum
w/CMOS Load
50 10(%) (Standard)
at 1.4VDC w/TTL Load; at 50% of Waveform
w/CMOS Load
50 5(%) (Optional)
5 nSeconds Maximum
at 1.4VDC w/TTL Load and CMOS Load
0.4VDC to 2.4VDC w/TTL Load; 20%
to 80% of Waveform w/CMOS Load
Rise Time / Fall Time
Period Jitter: Absolute
Period Jitter: One Sigma
100pSeconds Maximum
25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC31
8 pin DIP
5.0V
OS18
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC31 00 HS T A 15 ET - 24.000M - G TR
FREQUENCY TOLERANCE / STABILITY
00=±±00ppm Maximum
45=±50ppm Maximumꢀ ꢁ5=±ꢁ5ppm Maximum
ꢁ0=±ꢁ0ppm Maximum
PACKAGING OPTIONS
Blank=Bulk
TR=Tape & Reel (only offered with
Half Size G and Half Size Gꢁ Options)
AVAILABLE OPTIONS
Blank=None
CLXXX=Custom Lead Length
G=Half Size Gull Wing
Gꢁ=Alternate Half Size Gull Wing
PACKAGE
HS=Half Size 8 Pin DIP
DUTY CYCLE
Blank=50 ±±0(%)ꢀ T=50 ±5(%)
FREQUENCY
FREQUENCY DEVIATION
Blank=±50ppm Minimum
A=±±00ppm Minimum
B=±±50ppm Minimum
OPERATING TEMP. RANGE
Blank=0°C to 70°C
ET=-40°C to 85°C
LINEARITY
Blank=ꢁ0% Maximum
05=5% Maximumꢀ ±0=±0% Maximum
±5=±5%Maximum
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin ± Locator for Gull Wing
(±) For “G” Option (ꢁ) For “Gꢁ” Option
Pin ±: Control Voltage (Vc)
Pin 4: Case Ground
Pin 5: Output
Pin 8: Supply Voltage
MARKING SPECIFICATIONS
Line ±: ECLIPTEK
Line ꢁ: EC3±
Series Designator
ꢁ50 Pieces Per Reel
Compliant to EIA-48±A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 3: XX.XXX M
Line 4: XX Y ZZ
Frequency in MHz
(5 Digits Maximum + Decimal)
Characteristic
Seal Integrity
Specification
Bubble test in Perfluorocarbon at +±ꢁ5°C ±5°C for 60 seconds minimum.
Sn63 Solder dip at +ꢁ30°C ±5°C for 5 seconds/95% coverage.
±0 Strokes with brush after ± minute soak in solventꢀ 3 times.
Random drop on hard wooden plate 3 times from a height of ꢁ0cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Solderability
Marking Permanency
Shock
Note: Pin ± shall be designated with a dot
Vibration
Frequency with an amplitude of ±.5mm sweeping between ±0Hz to 55Hz
within ± minute (approximately) for ꢁ hours minimum on each axis
(Xꢀ Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC3±
8 pin DIP
5.0V
OS±8
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明