EMVA13AA3-13.000M [ECLIPTEK]

VCXO, CLOCK, 13 MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN;


型号：	EMVA13AA3-13.000M
厂家：	Ecliptek
描述：	VCXO, CLOCK, 13 MHz, LVCMOS OUTPUT, ROHS COMPLIANT, SMD, 4 PIN 机械输出元件石英晶振压控振荡器
文件：	总5页 (文件大小：164K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RoHS

EMVA13AA3-13.000M

EMVA13 A A 3 -13.000M

Series

Nominal Frequency

RoHS Compliant (Pb-free) 4 Pad 5mm x 7mm SMD

3.3Vdc LVCMOS Voltage Controlled MEMS Oscillator

13.000MHz

Absolute Pull Range

±80ppm Minimum

Frequency Tolerance/Stability

±50ppm Maximum

Operating Temperature Range

-20°C to +70°C

ELECTRICAL SPECIFICATIONS

Nominal Frequency

13.000MHz

Frequency Tolerance/Stability

±50ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the

Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C,

260°C Reflow, Shock, and Vibration)

Aging at 25°C

±1ppm Maximum First Year

-20°C to +70°C

Operating Temperature Range

Supply Voltage

3.3Vdc ±10%

Input Current

15mA Maximum

Output Voltage Logic High (Voh)

Output Voltage Logic Low (Vol)

Rise/Fall Time

90% of Vdd Minimum (IOH = -4mA)

10% of Vdd Maximum (IOL = +4mA)

2nSec Maximum (Measured from 20% to 80% of waveform)

50 ±5(%) (Measured at 50% of waveform)

15pF Maximum

Duty Cycle

Load Drive Capability

Output Logic Type

Absolute Pull Range

CMOS

±80ppm Minimum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the

Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, Vibration, and First

Year Aging at 25°C over the Control Voltage (Vc).)

Control Voltage

0.05Vdc to 1.7Vdc (Test Condition for APR)

0.0Vdc to 1.8Vdc

Control Voltage Range

Linearity

1% Maximum

Transfer Function

Modulation Bandwidth

Input Impedance

Positive Transfer Characteristic

8kHz Typical, 5kHz Minimum (Measured at -3dB, Vc = 0.875Vdc)

250kOhms Minimum

Input Leakage Current

Typical Phase Noise at Offsets

10µA Maximum

-100dBc/Hz at offset of 10kHz, -115dBc/Hz at offset of 100kHz, -145dBc/Hz at offset of 1MHz, and -

154dBc/Hz at offset of 10MHz

Period Jitter (RMS)

Period Jitter (pk-pk)

3pSec Typical, 6pSec Maximum

20pSec Typical, 40pSec Maximum

0.8pSec Typical

RMS Phase Jitter (Fj = 1.875MHz to

20MHz; Random)

RMS Phase Jitter (Fj = 900kHz to

7.5MHz; Random)

0.6pSec Typical

Start Up Time

10mSec Maximum

-55°C to +125°C

Storage Temperature Range

ENVIRONMENTAL & MECHANICAL SPECIFICATIONS

ESD Susceptibility

MIL-STD-883, Method 3015, Class 2, HBM 2000V

Flammability

UL94-V0

Mechanical Shock

MIL-STD-883, Method 2002, Condition G, 30,000G

MIL-STD-883, Method 1004

Moisture Resistance

Moisture Sensitivity Level

Resistance to Soldering Heat

Resistance to Solvents

Solderability

J-STD-020, MSL 1

MIL-STD-202, Method 210, Condition K

MIL-STD-202, Method 215

MIL-STD-883, Method 2003 (Four I/O Pads on bottom of package only)

www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 1 of 5

EMVA13AA3-13.000M

ENVIRONMENTAL & MECHANICAL SPECIFICATIONS

Temperature Cycling

Thermal Shock

Vibration

MIL-STD-883, Method 1010, Condition B

MIL-STD-883, Method 1011, Condition B

MIL-STD-883, Method 2007, Condition A, 20G

MECHANICAL DIMENSIONS (all dimensions in millimeters)

PIN CONNECTION

0.85

±0.15

1.20 ±0.10 (x4)

2.1

Control Voltage

Case Ground

Output

5.00

±0.15

0.08

MAX

R0.70 ±0.10

1.70

Supply Voltage

LINE MARKING

XXXX or XXXXX

7.00

±0.15

5.08

±0.10

XXXX or XXXXX=Ecliptek

Manufacturing Lot Code

C0.25 ±0.10

2.60 ±0.15

1.40

±0.10 (x4)

Note A: Center paddle is connected

internally to oscillator ground (Pad 2).

Suggested Solder Pad Layout

All Dimensions in Millimeters

2.0 (X4)

2.2 (X4)

Solder Land

(X4)

2.88

1.81

All Tolerances are ±0.1

www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 2 of 5

EMVA13AA3-13.000M

OUTPUT WAVEFORM

VOH

80% of Waveform

50% of Waveform

20% of Waveform

VOL

Fall

Time

Rise

Time

Duty Cycle (%) = TW/T x 100

Test Circuit for CMOS Output

Frequency

Counter

Oscilloscope

Probe

(Note 2)

Supply

Voltage

(V_DD

)

Output

Current

Meter

0.1µF

(Note 1)

0.01µF

(Note 1)

C_L

(Note 3)

Power

Supply

Voltage

Meter

Ground

Voltage

Control

Power

Supply

Voltage

Meter

Note 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency

ceramic bypass capacitor close to the package ground and V_DDpin is required.

Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth

(>300MHz) passive probe is recommended.

Note 3: Capacitance value C_Lincludes sum of all probe and fixture capacitance.

www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 3 of 5

EMVA13AA3-13.000M

Recommended Solder Reflow Methods

Critical Zone

T_Lto T_P

T_P

Ramp-up

Ramp-down

T_L

T_SMax

T_SMin

t_L

t_P

t_SPreheat

t 25°C to Peak

Time (t)

High Temperature Infrared/Convection

TS MAX to TL (Ramp-up Rate)

3°C/second Maximum

Preheat

- Temperature Minimum (TS MIN)

- Temperature Typical (TS TYP)

- Temperature Maximum (TS MAX)

- Time (tS MIN)

150°C

175°C

200°C

60 - 180 Seconds

Ramp-up Rate (TL to TP)

3°C/second Maximum

Time Maintained Above:

- Temperature (TL)

- Time (tL)

217°C

60 - 150 Seconds

Peak Temperature (TP)

260°C Maximum for 10 Seconds Maximum

250°C +0/-5°C

Target Peak Temperature (TP Target)

Time within 5°C of actual peak (tp)

Ramp-down Rate

20 - 40 seconds

6°C/second Maximum

8 minutes Maximum

Level 1

Time 25°C to Peak Temperature (t)

Moisture Sensitivity Level

www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 4 of 5

EMVA13AA3-13.000M

Recommended Solder Reflow Methods

Critical Zone

T_Lto T_P

T_P

Ramp-up

Ramp-down

T_L

T_SMax

T_SMin

t_L

t_P

t_SPreheat

t 25°C to Peak

Time (t)

Low Temperature Infrared/Convection 240°C

TS MAX to TL (Ramp-up Rate)

5°C/second Maximum

Preheat

- Temperature Minimum (TS MIN)

- Temperature Typical (TS TYP)

- Temperature Maximum (TS MAX)

- Time (tS MIN)

N/A

150°C

N/A

60 - 120 Seconds

Ramp-up Rate (TL to TP)

5°C/second Maximum

Time Maintained Above:

- Temperature (TL)

- Time (tL)

150°C

200 Seconds Maximum

Peak Temperature (TP)

240°C Maximum

Target Peak Temperature (TP Target)

Time within 5°C of actual peak (tp)

Ramp-down Rate

240°C Maximum 1 Time / 230°C Maximum 2 Times

10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time

5°C/second Maximum

Time 25°C to Peak Temperature (t)

Moisture Sensitivity Level

N/A

Level 1

Low Temperature Manual Soldering

185°C Maximum for 10 seconds Maximum, 2 times Maximum.

High Temperature Manual Soldering

260°C Maximum for 5 seconds Maximum, 2 times Maximum.

www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 5 of 5

相关型号：