首页 |元器件品牌

ES51F2C15V-20000M [ECLIPTEK]

SPECIFICATION CONTROL DRAWING; 规格控制图
ES51F2C15V-20000M
型号： ES51F2C15V-20000M
厂家： Ecliptek    Ecliptek
描述：

SPECIFICATION CONTROL DRAWING
规格控制图
文件： 总5页 (文件大小：164K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Marketing Bulletin  
DATE: May 10, 2004  
TO:  
Affected Customers  
FROM: Mark Stoner  
RE:  
Product Termination  
To all concerned parties,  
This bulletin is to notify all customers of the termination of the following Ecliptek series  
effective May 10th, 2004:  
Series  
Description  
Recommended Replacement  
EB51F2  
ES51F2  
EB52F2  
ES52F2  
5V 14 Pin DIP TCXO, HCMOS  
5V 14 Pin DIP TCXO, Sinewave  
3.3V 14 Pin DIP TCXO, HCMOS  
3.3V 14 Pin DIP TCXO, Sinewave  
None  
None  
None  
None  
Because of the circumstances surrounding this termination, there will be no end-of-life  
policy exercised. The series will be terminated with no purchasing or lifetime buy  
window available. We will however have a recommended alternative product for these  
series within the next ninety (90) days.  
All of us at Ecliptek Corporation apologize for any inconvenience this may have caused  
and can assure you we are taking measures to insure this will not happen again in the  
future. If there are any questions pertaining to this bulletin, please feel free to contact  
me. Thank you for your cooperation.  
Best Regards,  
Mark W. Stoner  
Director of Marketing  
Ecliptek Corporation  
3545 CADILLAC AVENUE· COSTA MESA, CA 92626-1401 · (714) 433-1200 · Fax (714) 433-1234  
STANDARD SPECIFICATIONS  
Frequency Range:  
1.544MHz to 44.736MHz  
Frequency Tolerance/Stability:  
Initial Frequency Tolerance  
vs. Operating Temperature Range  
vs. Input Voltage Change  
vs. Load Change  
±1ppm (at Nominal Vdd and Vc)  
See Table 1 for Maximum Values  
±0.3ppm Maximum (VDD ±5%)  
±0.2ppm Maximum (±10%)  
±1ppm/year Maximum (@25°C)  
See Table 1 for Operating Temperature Range  
-55°C to +125°C  
vs. Aging  
Operating Temperature Range  
Storage Temperature Range  
Supply Voltage (VDD)  
OBSOLETE  
5.0Vdc ±5%  
Input Current (Steady State @25°C) 15mA Maximum < 20.000MHz  
30mA Maximum > 20.000MHz  
DD  
-0.5Vdc Minimum  
0.5Vdc Maximum  
6nSec (20% to 80% of waveform)  
50% ±5% (@ 50% of waveform)  
30pF HCMOS Load  
Output Voltage Logic High  
Output Voltage Logic Low  
Rise/Fall Time  
Duty Cycle  
Load Drive Capabillity  
Phase Noise (Typical)  
V
-60dBc/Hz at 10Hz Offset, -90dBc/Hz at 100Hz Offset, -125dBc/Hz at 1kHz Offset, -135dBc/Hz at 10kHz Offset,  
-140dBc/Hz at 100kHz Offset,  
Frequency Deviation  
ControlVoltageRange(VCR)  
ControlVoltage /TransferFunction  
Linearity  
±7ppm Minimum, ±20ppm Maximum (Referenced to Fo at Vc=2.5Vdc; Vdd=5.0Vdc)  
0.0VDC to VDD  
DC  
DC  
2.5V ±2.0V / Positive Transfer Characteristic  
±10% Maximum  
Input Impedance  
10kOhms Typical  
ENVIRONMENTAL & MECHANICAL  
Fine Leak Test:  
Gross Leak Test:  
Mechanical Shock:  
Vibration:  
MIL-STD-883, Method 1014, Condition A  
Solderability:  
MIL-STD-883, Method 2002  
MIL-STD-883, Method 1010  
MIL-STD-202, Method 210  
MIL-STD-202, Method 215  
MIL-STD-883, Method 1014, Condition C  
MIL-STD-202, Method 213, Condition C  
MIL-STD-883, Method 2007, Condition A  
MIL-STD-883, Method 2004  
Temperature Cycling:  
Resistance to Soldering Heat:  
Resistance to Solvents:  
Lead Integrity:  
TABLE 1: PART NUMBERING CODES  
FREQUENCY STABILITY  
X Denotes availability from 1.544MHz to 32.768MHz  
OPERATING  
TEMPERATURE  
Y Denotes availability for any valid frequency  
PART NUMBERING GUIDE  
EB51F2 A 10 V - 20.000M  
Range  
Code  
15  
20  
30  
50  
Code  
Range  
±1.5ppm ±2.0ppm ±3.0ppm ±5.0ppm  
0°C to +50°C  
0°C to +70°C  
-20°C to +70°C  
-30°C to +75°C  
-40°C to +85°C  
Y
X
X
Y
Y
X
X
Y
Y
Y
Y
X
Y
Y
Y
Y
Y
A
B
C
D
E
Frequency  
Voltage Control Option  
V = Voltage Control on Pin 1  
N = No Connect on Pin 1  
Frequency Stability Code Per Table 1  
MARKING GUIDE  
Operating Temperature  
Range Code Per Table 1  
(Line #1) ECLIPTEK  
(Line #2) XX.XXXM  
ECLIPTEK  
XX.XXXM  
XXYZZ  
Frequency  
15.240  
0.6 MAX  
±0.203  
7
8
(Line #3) XX Y ZZ  
1
Week of Year  
Last Digit of Year  
Ecliptek Manufacturing Code (TEN02-001-000)  
7.620  
±0.203  
Æ0.457  
±0.100 (X4)  
NOTE: Pin 1 shall be marked with a dot. Marking shall  
conform to conditions listed in TQC41-001-000.  
14  
20.3 ±0.5  
SPECIFICATION CONTROL DRAWING  
Drawing Number  
8.3  
MAX  
5.08  
MIN  
CSC26-140-001  
13.0  
±0.5  
Title  
ALL DIMENSIONS  
5.0V Full Size (VC)TCXO  
IN MILLIMETERS  
Revision  
Effectivity Date  
PIN  
CONNECTION  
09-09-03  
A
1
7
No Connect or Voltage Control  
Ground/Case Ground  
Output  
ECN Number  
PAGE 1 OF 2  
8159  
8
14  
Supply Voltage  
Released By  
Date  
Date  
Approved By  
STANDARD SPECIFICATIONS  
Frequency Range:  
9.600MHz to 44.736MHz  
Frequency Tolerance/Stability:  
Initial Frequency Tolerance  
vs. Operating Temperature Range  
vs. Input Voltage Change  
vs. Load Change  
±1ppm (at Nominal Vdd and Vc)  
See Table 1 for Maximum Values  
±0.3ppm Maximum (VDD ±5%)  
±0.2ppm Maximum (±10%)  
±1ppm/year Maximum (@25°C)  
See Table 1 for Operating Temperature Range  
-55°C to +125°C  
OBSOLETE  
vs. Aging  
Operating Temperature Range  
Storage Temperature Range  
Supply Voltage (VDD)  
5.0Vdc ±5%  
Input Current (Steady State @25°C) 10mA Maximum  
Output Voltage  
1.0Vp-p Minimum Clipped Sinewave  
Load Drive Capabillity  
Phase Noise (Typical)  
10kOhms//10pF  
-60dBc/Hz at 10Hz Offset, -90dBc/Hz at 100Hz Offset, -125dBc/Hz at 1kHz Offset, -135dBc/Hz at 10kHz Offset,  
-140dBc/Hz at 100kHz Offset  
Frequency Deviation  
±7ppm Minimum, ±20ppm Maximum (Referenced to Fo at Vc=2.5Vdc; Vdd=5.0Vdc)  
CR  
DC  
DD  
ControlVoltageRange(V  
)
0.0V to V  
DC  
DC  
ControlVoltage /TransferFunction  
Linearity  
2.5V ±2.0V / Positive Transfer Characteristic  
±10% Maximum  
Input Impedance  
10kOhms Typical  
ENVIRONMENTAL & MECHANICAL  
Fine Leak Test:  
Gross Leak Test:  
Mechanical Shock:  
Vibration:  
MIL-STD-883, Method 1014, Condition A  
Solderability:  
MIL-STD-883, Method 2002  
MIL-STD-883, Method 1010  
MIL-STD-202, Method 210  
MIL-STD-202, Method 215  
MIL-STD-883, Method 1014, Condition C  
MIL-STD-202, Method 213, Condition C  
MIL-STD-883, Method 2007, Condition A  
MIL-STD-883, Method 2004  
Temperature Cycling:  
Resistance to Soldering Heat:  
Resistance to Solvents:  
Lead Integrity:  
TABLE 1: PART NUMBERING CODES  
FREQUENCY STABILITY  
X Denotes availability from 9.600MHz to 32.768MHz  
OPERATING  
TEMPERATURE  
Y Denotes availability for any valid frequency  
PART NUMBERING GUIDE  
ES51F2 A 10 V - 20.000M  
Range  
Code  
15  
20  
30  
50  
Code  
Range  
±1.5ppm ±2.0ppm ±3.0ppm ±5.0ppm  
0°C to +50°C  
0°C to +70°C  
-20°C to +70°C  
-30°C to +75°C  
-40°C to +85°C  
Y
X
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
Y
Y
A
B
C
D
E
Frequency  
Voltage Control Option  
V = Voltage Control on Pin 1  
N = No Connect on Pin 1  
Frequency Stability Code Per Table 1  
Operating Temperature  
Range Code Per Table 1  
MARKING GUIDE  
(Line #1) ECLIPTEK  
(Line #2) XX.XXXM  
ECLIPTEK  
XX.XXXM  
XXYZZ  
Frequency  
(Line #3) XX Y ZZ  
Week of Year  
Last Digit of Year  
Ecliptek Manufacturing Code (TEN02-001-000)  
15.240  
0.6 MAX  
±0.203  
7
1
NOTE: Pin 1 shall be marked with a dot. Marking shall  
conform to conditions listed in TQC41-001-000.  
7.620  
±0.203  
Æ0.457  
±0.100 (X4)  
14  
8
20.3 ±0.5  
8.3  
MAX  
SPECIFICATION CONTROL DRAWING  
Drawing Number  
5.08  
MIN  
CSC26-160-001  
13.0  
±0.5  
Title  
ALL DIMENSIONS  
5.0V Clipped Sinewave Full Size (VC)TCXO  
IN MILLIMETERS  
Revision  
Effectivity Date  
PIN  
CONNECTION  
09-09-03  
A
1
7
No Connect or Voltage Control  
Ground/Case Ground  
Output  
ECN Number  
PAGE 1 OF 2  
8163  
8
14  
Supply Voltage  
Released By  
Date  
Date  
Approved By  
STANDARD SPECIFICATIONS  
Frequency Range:  
1.544MHz to 44.736MHz  
Frequency Tolerance/Stability:  
Initial Frequency Tolerance  
vs. Operating Temperature Range  
vs. Input Voltage Change  
vs. Load Change  
±1ppm (at Nominal Vdd and Vc)  
See Table 1 for Maximum Values  
±0.3ppm Maximum (VDD ±5%)  
±0.2ppm Maximum (±10%)  
±1ppm/year Maximum (@25°C)  
See Table 1 for Operating Temperature Range  
-55°C to +125°C  
OBSOLETE  
vs. Aging  
Operating Temperature Range  
Storage Temperature Range  
Supply Voltage (VDD)  
3.3Vdc ±5%  
Input Current (Steady State @25°C) 15mA Maximum < 20.000MHz  
25mA Maximum > 20.000MHz  
Output Voltage Logic High  
Output Voltage Logic Low  
Rise/Fall Time  
Duty Cycle  
Load Drive Capabillity  
Phase Noise (Typical)  
90% of Vdd Minimum  
10% of Vdd Maximum  
6nSec (20% to 80% of waveform)  
50% ±5% (@ 50% of waveform)  
15pF HCMOS Load  
-60dBc/Hz at 10Hz Offset, -90dBc/Hz at 100Hz Offset, -125dBc/Hz at 1kHz Offset, -135dBc/Hz at 10kHz Offset,  
-140dBc/Hz at 100kHz Offset,  
Frequency Deviation  
ControlVoltageRange(VCR)  
ControlVoltage /TransferFunction  
Linearity  
±7ppm Minimum, ±20ppm Maximum (Referenced to Fo at Vc=1.65Vdc; Vdd=3.3Vdc)  
0.0VDC to VDD  
DC  
DC  
1.65V ±1.35V / Positive Transfer Characteristic  
±10% Maximum  
Input Impedance  
10kOhms Typical  
ENVIRONMENTAL & MECHANICAL  
Fine Leak Test:  
Gross Leak Test:  
Mechanical Shock:  
Vibration:  
MIL-STD-883, Method 1014, Condition A  
Solderability:  
MIL-STD-883, Method 2002  
MIL-STD-883, Method 1010  
MIL-STD-202, Method 210  
MIL-STD-202, Method 215  
MIL-STD-883, Method 1014, Condition C  
Temperature Cycling:  
MIL-STD-202, Method 213, Condition C  
MIL-STD-883, Method 2007, Condition A  
MIL-STD-883, Method 2004  
Resistance to Soldering Heat:  
Resistance to Solvents:  
Lead Integrity:  
TABLE 1: PART NUMBERING CODES  
FREQUENCY STABILITY  
X Denotes availability from 1.544MHz to 32.768MHz  
OPERATING  
TEMPERATURE  
Y Denotes availability for any valid frequency  
PART NUMBERING GUIDE  
EB52F2 A 10 V - 20.000M  
Range  
Code  
15  
20  
30  
50  
Code  
Range  
±1.5ppm ±2.0ppm ±3.0ppm ±5.0ppm  
0°C to +50°C  
0°C to +70°C  
-20°C to +70°C  
-30°C to +75°C  
-40°C to +85°C  
Y
X
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
Y
Y
A
B
C
D
E
Frequency  
Voltage Control Option  
V = Voltage Control on Pin 1  
N = No Connect on Pin 1  
Frequency Stability Code Per Table 1  
Operating Temperature  
Range Code Per Table 1  
MARKING GUIDE  
(Line #1) ECLIPTEK  
(Line #2) XX.XXXM  
ECLIPTEK  
XX.XXXM  
XXYZZ  
Frequency  
15.240  
0.6 MAX  
±0.203  
7
8
(Line #3) XX Y ZZ  
1
Week of Year  
Last Digit of Year  
Ecliptek Manufacturing Code (TEN02-001-000)  
7.620  
±0.203  
Æ0.457  
±0.100 (X4)  
NOTE: Pin 1 shall be marked with a dot. Marking shall  
conform to conditions listed in TQC41-001-000.  
14  
20.3 ±0.5  
SPECIFICATION CONTROL DRAWING  
Drawing Number  
8.3  
MAX  
5.08  
MIN  
CSC26-150-001  
13.0  
±0.5  
Title  
ALL DIMENSIONS  
3.3V FULL SIZE (VC)TCXO  
IN MILLIMETERS  
Revision  
Effectivity Date  
PIN  
CONNECTION  
09-09-03  
A
1
7
No Connect or Voltage Control  
Ground/Case Ground  
Output  
ECN Number  
PAGE 1 OF 2  
8161  
8
14  
Supply Voltage  
Released By  
Date  
Date  
Approved By  
STANDARD SPECIFICATIONS  
Frequency Range:  
9.600MHz to 44.736MHz  
Frequency Tolerance/Stability:  
Initial Frequency Tolerance  
vs. Operating Temperature Range  
vs. Input Voltage Change  
vs. Load Change  
±1ppm (at Nominal Vdd and Vc)  
See Table 1 for Maximum Values  
±0.3ppm Maximum (VDD ±5%)  
±0.2ppm Maximum (±10%)  
±1ppm/year Maximum (@25°C)  
See Table 1 for Operating Temperature Range  
-55°C to +125°C  
OBSOLETE  
vs. Aging  
Operating Temperature Range  
Storage Temperature Range  
Supply Voltage (VDD)  
3.3Vdc ±5%  
Input Current (Steady State @25°C) 10mA Maximum  
Output Voltage  
0.7Vp-p Minimum Clipped Sinewave  
Load Drive Capabillity  
Phase Noise (Typical)  
10kOhms//10pF  
-60dBc/Hz at 10Hz Offset, -90dBc/Hz at 100Hz Offset, -125dBc/Hz at 1kHz Offset, -135dBc/Hz at 10kHz Offset,  
-140dBc/Hz at 100kHz Offset  
Frequency Deviation  
±7ppm Minimum, ±20ppm Maximum (Referenced to Fo at Vc=1.65Vdc; Vdd=3.3Vdc)  
CR  
DC  
DD  
ControlVoltageRange(V  
)
0.0V to V  
DC  
DC  
ControlVoltage /TransferFunction  
Linearity  
1.65V ±1.35V / Positive Transfer Characteristic  
±10% Maximum  
Input Impedance  
10kOhms Typical  
ENVIRONMENTAL & MECHANICAL  
Fine Leak Test:  
Gross Leak Test:  
Mechanical Shock:  
Vibration:  
MIL-STD-883, Method 1014, Condition A  
MIL-STD-883, Method 1014, Condition C  
MIL-STD-202, Method 213, Condition C  
MIL-STD-883, Method 2007, Condition A  
MIL-STD-883, Method 2004  
Solderability:  
Temperature Cycling:  
Resistance to Soldering Heat:  
Resistance to Solvents:  
MIL-STD-883, Method 2002  
MIL-STD-883, Method 1010  
MIL-STD-202, Method 210  
MIL-STD-202, Method 215  
Lead Integrity:  
TABLE 1: PART NUMBERING CODES  
FREQUENCY STABILITY  
X Denotes availability from 9.600MHz to 32.768MHz  
OPERATING  
TEMPERATURE  
Y Denotes availability for any valid frequency  
PART NUMBERING GUIDE  
ES52F2 A 10 V - 20.000M  
Range  
Code  
15  
20  
30  
50  
Code  
Range  
±1.5ppm ±2.0ppm ±3.0ppm ±5.0ppm  
0°C to +50°C  
0°C to +70°C  
-20°C to +70°C  
-30°C to +75°C  
-40°C to +85°C  
Y
X
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
Y
Y
A
B
C
D
E
Frequency  
Voltage Control Option  
V = Voltage Control on Pin 1  
N = No Connect on Pin 1  
Frequency Stability Code Per Table 1  
Operating Temperature  
Range Code Per Table 1  
MARKING GUIDE  
(Line #1) ECLIPTEK  
(Line #2) XX.XXXM  
ECLIPTEK  
XX.XXXM  
XXYZZ  
Frequency  
(Line #3) XX Y ZZ  
Week of Year  
Last Digit of Year  
Ecliptek Manufacturing Code (TEN02-001-000)  
15.240  
0.6 MAX  
±0.203  
7
1
NOTE: Pin 1 shall be marked with a dot. Marking shall  
conform to conditions listed in TQC41-001-000.  
7.620  
±0.203  
Æ0.457  
±0.100 (X4)  
14  
8
20.3 ±0.5  
8.3  
MAX  
SPECIFICATION CONTROL DRAWING  
Drawing Number  
5.08  
MIN  
CSC26-170-001  
13.0  
±0.5  
Title  
ALL DIMENSIONS  
3.3V Clipped Sinewave Full Size (VC)TCXO  
IN MILLIMETERS  
Revision  
Effectivity Date  
PIN  
CONNECTION  
09-09-03  
A
1
7
No Connect or Voltage Control  
Ground/Case Ground  
Output  
ECN Number  
PAGE 1 OF 2  
8165  
8
14  
Supply Voltage  
Released By  
Date  
Date  
Approved By  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明