PG1M-3LAP-3SC [ELITE]
9W Power LED Module;
| 型号： | PG1M-3LAP-3SC |
| 厂家： | 
Elite Enterprises (H.K.) Co., Ltd. |
| 描述： | 9W Power LED Module |
| 文件： | 总14页 (文件大小：534K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technology Corporation
ProLight PG1M-3LXP-3SC
9W Power LED Module
Technical Datasheet
Version: 1.4
Features
●High flux per LED
●Very long operating life(up to 100k hours)
●Good color uniformity
●RoHS compliant
●More energy efficient than incandescent and
most halogen lamps
●Low Voltage DC operated
●Instant light (less than 100ns)
●No UV
●Superior ESD protection
Typical Applications
● Reading lights (car, bus, aircraft)
●Uplighters/Downlighters
● Decorative/Entertainment
● Bollards/Security/Garden
● Cove/Undershelf/Task
● Indoor/Outdoor Commercial and
Residential Architectural
2008/06
1
Module Mechanical Dimensions
Notes:
1. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote
positive and negative, respectively. All positive pads are interconnected, as are all negative pads,
allowing for flexibility in array interconnection.
2. Drawing not to scale.
3. All dimensions are in millimeters.
4. All dimendions without tolerances are for reference only.
5. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
2
Flux Characteristics at 700mA, TJ = 25°C
Lumious Flux ΦV (lm)
Part Number
Module
Radiation
Pattern
Color
Minimum
Typical
White
Warm White
Green
PG1M-3LWP-3SC
PG1M-3LVP-3SC
PG1M-3LGP-3SC
PG1M-3LBP-3SC
PG1M-3LAP-3SC
PG1M-3LRP-3SC
262.2
262.2
262.2
54.3
330
300
315
78
Lambertian
Blue
Amber
Red
176.7
176.7
228
216
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
● Please do not drive at rated current more than 5 second without proper heat sink.
Electrical Characteristics at 700mA, TJ = 25°C
Temperature
Thermal
Resistance
Junction to
Board (°C/ W)
Coefficient of
VF (mV/ °C)
ΔVF/ ΔTJ
Forward Voltage VF (V)
Dynamic
Color
Min.
Typ.
Max.
Resistance (Ω)
White
Warm White
Green
8.4
8.4
8.4
8.4
5.7
5.7
10.5
10.5
10.5
10.5
6.6
12.9
12.9
12.9
12.9
9.3
1.0
1.0
1.0
1.0
2.4
2.4
-2.0
-2.0
-2.0
-2.0
-2.0
-2.0
4
4
4
4
5
5
Blue
Amber
Red
6.6
9.3
Optical Characteristics at 700mA, TJ = 25°C
Temperature
Coefficient of
Dominant
Half-width Wavelength
Total
included Viewing
Angle Angle
(degrees) (degrees)
Dominant Wavelength λD,
Spectral
or Color Temperature CCT
(nm)
(nm/ °C)
Radiation
Pattern
Color
Δλ1/2
ΔλD/ ΔTJ
θ0.90V
2 θ1/2
Min.
Typ.
Max.
White
4100 K
5500 K
3300 K
525 nm
465 nm
592 nm
10000 K
4100 K
535 nm
475 nm
597 nm
631 nm
---
---
35
25
20
20
---
160
160
160
160
160
160
140
140
140
140
140
140
Warm White 2700 K
---
Green
Blue
515 nm
455 nm
587 nm
0.04
0.04
0.05
0.05
Lambertian
Amber
Red
613.5 nm 623 nm
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
● ProLight maintains a tolerance of ± 5% for CCT measurements.
3
Absolute Maximum Ratings
White/Warm White/
Parameter
Green/Blue/Amber/Red
DC Forward Current (mA)
700
1000
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
ESD Sensitivity
LED Junction Temperature (°C)
Aluminum-core PCB Temperature (°C)
Storage & Operating Temperature (°C)
700
±16000V HBM
120
105
-40 to +105
Photometric Luminous Flux Bin Structure
Color
Bin Code
Minimum Photometric Flux (lm)
Maximum Photometric Flux (lm)
U1
U2
V1
87.4
99.6
99.6
113.6
129.5
White
113.6
U1
U2
V1
87.4
99.6
99.6
113.6
129.5
Warm White
Green
113.6
U1
U2
V1
V2
87.4
99.6
99.6
113.6
129.5
147.7
113.6
129.5
N
P
Q
18.1
23.5
30.6
23.5
30.6
39.8
Blue
Amber
Red
S2
T1
T2
58.9
67.2
76.6
67.2
76.6
87.4
S2
T1
T2
58.9
67.2
76.6
67.2
76.6
87.4
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
4
Color Bin
White and Warm White Binning Structure Graphical Representation
0.48
2700 K
0.46
0.44
2850 K
3050 K
3250 K
MM
3500 K
NM
PM
3800 K
QM
M1
4100 K
N1
M0
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
RM
P1
Q1
P0
SM
4500 K
Planckian
(BBL)
N0
MA
R1
TM
Q0
S1
5000 K
NA
R0
UM
UN
VN U0
PA
TN
S0
QA
5650 K VM
RA
T0
6300 K
SA
WM
TP
Warm White
7000 K XM
XN W0
WN V0
UP
VP
X0
WP
WQ
10000 K
White
Y0
YA
XP
0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50
x
5
Color Bins
White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
W0
x
y
0.378
0.374
0.360
0.362
0.382
0.378
0.362
0.365
0.374
0.370
0.357
0.360
0.386
0.382
0.365
0.367
0.362
0.360
0.344
0.346
0.365
0.362
0.346
0.347
0.360
0.357
0.343
0.344
0.365
0.367
0.348
0.347
0.329
0.329
0.346
0.344
0.329
0.329
0.347
0.346
0.329
0.344
0.343
0.329
0.329
0.329
0.348
0.347
0.382
0.366
0.357
0.372
0.397
0.382
0.372
0.386
0.366
0.351
0.342
0.357
0.413
0.397
0.386
0.400
0.372
0.357
0.344
0.359
0.386
0.372
0.359
0.372
0.357
0.342
0.331
0.344
0.386
0.400
0.385
0.372
0.331
0.345
0.359
0.344
0.345
0.357
0.372
0.359
0.331
0.344
0.331
0.320
0.357
0.369
0.385
0.372
0.329
0.329
0.317
0.316
0.329
0.316
0.315
0.329
0.329
0.329
0.318
0.317
0.329
0.329
0.319
0.318
0.329
0.329
0.315
0.314
0.308
0.305
0.316
0.317
0.305
0.303
0.315
0.316
0.308
0.317
0.319
0.311
0.301
0.314
0.315
0.303
0.308
0.283
0.274
0.303
0.308
0.311
0.290
0.283
0.345
0.331
0.320
0.333
0.345
0.333
0.344
0.357
0.331
0.320
0.310
0.320
0.320
0.310
0.300
0.310
0.369
0.357
0.344
0.355
0.311
0.322
0.333
0.320
0.322
0.333
0.344
0.333
0.311
0.320
0.300
0.293
0.342
0.355
0.344
0.333
0.311
0.284
0.301
0.333
0.311
0.293
0.270
0.284
T0
4300
4300
4300
4300
4750
4750
4750
4750
5320
5320
5320
5320
5970
5970
5970
5970
5970
6650
6650
6650
6650
8000
8000
TN
TP
TM
U0
UN
UP
UM
V0
WN
WP
WQ
WM
X0
XN
XP
XM
Y0
VN
VP
VM
YA
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
6
Color Bins
Warm White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
Q0
x
y
0.453
0.444
0.459
0.467
0.460
0.453
0.467
0.473
0.459
0.444
0.436
0.451
0.471
0.460
0.473
0.486
0.438
0.429
0.444
0.453
0.444
0.438
0.453
0.460
0.444
0.429
0.422
0.436
0.454
0.444
0.460
0.471
0.424
0.416
0.429
0.438
0.430
0.424
0.438
0.444
0.429
0.416
0.410
0.422
0.438
0.430
0.444
0.454
0.416
0.399
0.403
0.419
0.430
0.416
0.419
0.432
0.403
0.399
0.384
0.389
0.451
0.430
0.432
0.455
0.412
0.394
0.399
0.416
0.426
0.412
0.416
0.430
0.399
0.394
0.379
0.384
0.446
0.426
0.430
0.451
0.407
0.389
0.394
0.412
0.421
0.407
0.412
0.426
0.394
0.389
0.374
0.379
0.440
0.421
0.426
0.446
0.409
0.402
0.416
0.424
0.414
0.409
0.424
0.430
0.416
0.402
0.396
0.410
0.421
0.414
0.430
0.438
0.392
0.387
0.402
0.409
0.414
0.409
0.392
0.397
0.387
0.383
0.396
0.402
0.421
0.414
0.397
0.402
0.392
0.387
0.374
0.378
0.397
0.392
0.378
0.382
0.387
0.383
0.370
0.374
0.402
0.397
0.382
0.386
0.400
0.382
0.389
0.407
0.414
0.400
0.407
0.421
0.389
0.382
0.367
0.374
0.433
0.414
0.421
0.440
0.391
0.374
0.382
0.400
0.414
0.400
0.391
0.406
0.374
0.360
0.367
0.382
0.433
0.414
0.406
0.423
0.391
0.374
0.366
0.382
0.406
0.391
0.382
0.397
0.374
0.360
0.351
0.366
0.423
0.406
0.397
0.413
M0
2770
2770
2770
2770
2950
2950
2950
2950
3150
3150
3150
3150
3370
3370
3370
3370
3650
3650
3650
3650
3950
3950
3950
3950
M1
MA
MM
N0
Q1
QA
QM
R0
R1
RA
RM
S0
N1
NA
NM
P0
P1
S1
PA
PM
SA
SM
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
7
Dominant Wavelength Bin Structure
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
Color
Bin Code
A
1
2
3
515
520
525
530
520
525
530
535
Green
A
1
2
3
455
460
465
470
460
465
470
475
Blue
2
4
6
7
587.0
589.5
592.0
594.5
589.5
592.0
594.5
597.0
Amber
Red
2
4
613.5
620.5
620.5
631.0
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
8
Color Spectrum, TJ = 25°C
1. White
1.0
0.8
Standard Eye Response Cruve
White
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
2. Warm White
1.0
Standard Eye Response Cruve
Warm White
0.8
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
3. Blue、Green、Amber、Red
1.0
0.8
0.6
0.4
0.2
0.0
Blue
Green
Amber
Red
400
450
500
550
600
650
700
Wavelength(nm)
9
Light Output Characteristics
Relative Light Output vs. Junction Temperature at 700mA
160
White, Warm White
Green
Blue
140
120
100
80
60
40
20
0
-20
0
20
40
60
80
100
120
Junction Temperature, TJ (℃)
160
140
120
100
80
Red
Amber
60
40
20
0
-20
0
20
40
60
80
100
120
Junction Temperature, TJ (℃)
10
Forward Current Characteristics, TJ = 25°C
1. Forward Voltage vs. Forward Current
800
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
Red
White, Warm White,
Green, Blue
0
2
4
6
8
10 12
0
2
4
6
8
10 12
Forward Voltage (V)
Forward Voltage (V)
2. Forward Current vs. Normalized Relative Luminous Flux
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Red
White, Warm White,
Green, Blue
0
200
400
600
800
0
200
400
600
800
Forward Current (mA)
Forward Current (mA)
11
Ambient Temperature vs. Maximum Forward Current
1. White, Warm White, Green, Blue (TJMAX = 120°C)
800
700
600
500
RθJ-A = 10°C/W
400
300
200
100
0
RθJ-A = 8°C/W
RθJ-A = 7°C/W
RθJ-A = 5°C/W
0
25
50
75
100
125
150
Ambient Temperature (℃)
2. Red, Amber (TJMAX = 120°C)
800
700
600
500
RθJ-A = 10°C/W
400
300
200
100
0
Rθ =8°C/W
J-A
Rθ =7°C/W
J-A
Rθ =5°C/W
J-A
0
25
50
75
100
125
150
Ambient Temperature (℃)
12
Typical Representative Spatial Radiation Pattern
Lambertian Radiation Pattern
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
Angular Displacement (Degrees)
Collimator Options
Collimator Part Number
Collimator Outline
PG1N-3N06
PG1N-3N15
PG1N-3N25
● Please refer to the relative collimator datasheet for the details.
13
Precaution for Use
● Storage
Please do not open the moisture barrier bag (MBB) more than one week. This may cause the
leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening
the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less
than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
● The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
● The slug is to be soldered. If not, please use the heat conductive adhesive.
● Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temperature after soldering.
● Please avoid rapid cooling after soldering.
● Components should not be mounted on warped direction of PCB.
● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a heat plate should be used. It should be confirmed beforehand whether the characteristics of
the LEDs will or will not be damaged by repairing.
● This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When cleaning is required, isopropyl alcohol should be used.
● When the LEDs are illuminating, operating current should be decide after considering the
package maximum temperature.
● The appearance and specifications of the product may be modified for improvement without
notice.
Handling of Silicone Lens LEDs
Notes for handling of silicone lens LEDs
● Please do not use a force of over 3kgf impact or pressure on the silicone lens,
otherwise it will cause a catastrophic failure.
● The LEDs should only be picked up by making contact with the sides of the LED body.
● Avoid touching the silicone lens especially by sharp tools such as Tweezers.
● Avoid leaving fingerprints on the silicone lens.
● Please store the LEDs away from dusty areas or seal the product against dust.
● When populating boards in SMT production, there are basically no restrictions
regarding the form of the pick and place nozzle, except that mechanical pressure
on the silicone lens must be prevented.
● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
╳
14
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明