PG1M-3LXP-003AC [ELITE]
9W Power LED Module;型号: | PG1M-3LXP-003AC |
厂家: | Elite Enterprises (H.K.) Co., Ltd. |
描述: | 9W Power LED Module |
文件: | 总15页 (文件大小:1108K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ProLight PG1M-3LxP-003AC
9W Power LED Module
Technical Datasheet
Version: 1.1
Features
● High flux per LED
● Various colors
● Good color uniformity
● RoHS compliant
● More energy efficient than incandescent and
most halogen lamps
● Low Voltage DC operated
● Instant light (less than 100ns)
● No UV
● Superior ESD protection
Typical Applications
● Reading lights (car, bus, aircraft)
● Portable (flashlight, bicycle)
● Uplighters/Downlighters
● Decorative/Entertainment
● Bollards/Security/Garden
● Cove/Undershelf/Task
● Indoor/Outdoor Commercial and
Residential Architectural
● Automotive Ext (Stop-Tail-Turn,
CHMSL, Mirror Side Repeat)
2010/04
1
Mechanical Dimensions
Notes:
1. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote
positive and negative, respectively. All positive pads are interconnected, as are all negative pads,
allowing for flexibility in array interconnection.
2. Drawing not to scale.
3. All dimensions are in millimeters.
4. All dimendions without tolerances are for reference only.
5. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
2
Flux Characteristics at 700mA, TJ = 25°C
Part Number
Module
Lumious Flux ΦV (lm)
Radiation
Pattern
Color
Minimum
Typical
PG1M-3LWP-003AC
PG1M-3LVP-003AC
PG1M-3LRP-003AC
PG1M-3LAP-003AC
PG1M-3LGP-003AC
PG1M-3LBP-003AC
White
Warm White
Red
390
340
177
200
300
70
445
415
245
255
340
96
Lambertian
Amber
Green
Blue
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
● Please do not drive at rated current more than 1 second without proper heat sink.
Electrical Characteristics at 700mA, TJ = 25°C
Forward Voltage VF (V)
Typ.
Thermal Resistance
Junction to Board (°C/ W)
Color
Min.
Max.
5
5
5
5
5
5
White
Warm White
Red
9.3
9.3
6.0
6.0
9.3
9.3
11.4
11.4
8.1
13.05
13.05
9.75
Amber
Green
8.1
9.75
11.7
11.4
13.05
13.05
Blue
Optical Characteristics at 700mA, TJ = 25°C
Total
Dominant Wavelength λD,
included
Angle
Viewing
Angle
or Color Temperature CCT
(degrees)
θ0.90V
(degrees)
2 θ1/2
Color
Min.
Typ.
Max.
White
Warm White
Red
4100 K
2700 K
5500 K
3300 K
623 nm
592 nm
525 nm
465 nm
10000 K
4100 K
631 nm
597 nm
535 nm
475 nm
160
160
160
160
160
160
140
140
140
140
140
140
613.5 nm
587 nm
515 nm
455 nm
Amber
Green
Blue
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
● ProLight maintains a tolerance of ± 5% for CCT measurements.
3
Absolute Maximum Ratings
White/Warm White/
Red/Amber/Green/Blue
Parameter
700
1000
700
DC Forward Current (mA)
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
ESD Sensitivity
±4000V (Class III)
(HBM per MIL-STD-883E Method 3015.7)
LED Junction Temperature (°C)
Aluminum-core PCB Temperature (°C)
Storage & Operating Temperature (°C)
Soldering Temperature(°C)
120
105
-40 to +105
235°C
Photometric Luminous Flux Bin Structure of Each LED
Minimum
Maximum
Available
Color
Bin Code
Photometric Flux (lm)
Photometric Flux (lm)
Color Bins
129.5
147.7
147.7
168.4
All
V2
White
Yx, Xx, Wx, Vx, Ux【1】
W1
113.6
129.5
147.7
129.5
147.7
168.4
All
All
V1
V2
Warm White
Sx, Rx【1】
W1
58.9
67.2
76.6
87.4
67.2
76.6
87.4
99.6
All
All
S2
T1
T2
U1
Red
All
【1】
67.2
76.6
87.4
76.6
87.4
99.6
All
T1
T2
U1
Amber
Green
Blue
All
【1】
99.6
113.6
129.5
113.6
129.5
147.7
All
U2
V1
V2
All
【1】
A, 1, 2【1】
1, 2【1】
【1】
23.5
30.6
39.8
30.6
39.8
51.7
P
Q
R
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
● The flux bin of the product may be modified for improvement without notice.
●
【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility.
4
Color Bin
White and Warm White Binning Structure Graphical Representation
0.48
2700 K
2850 K
0.46
0.44
3050 K
3250 K
3500 K
3800 K
M1
4100 K
N1
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
P1
N0
Q1
4500 K
M0
Planckian
(BBL)
R1
P0
Q0
S1
S0
5000 K
R0
TN
T0
5650 K
UN
U0
6300 K
VN
V0
Warm White
7000 K
WN
XN
X0
W0
WP
10000 K
Y0
White
XP
YA
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
x
5
Color Bins
White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
WN
x
y
0.378
0.374
0.360
0.362
0.382
0.378
0.362
0.365
0.362
0.360
0.344
0.346
0.365
0.362
0.346
0.347
0.329
0.329
0.346
0.344
0.329
0.329
0.347
0.346
0.329
0.329
0.317
0.316
0.382
0.366
0.357
0.372
0.397
0.382
0.372
0.386
0.372
0.357
0.344
0.359
0.386
0.372
0.359
0.372
0.331
0.345
0.359
0.344
0.345
0.357
0.372
0.359
0.345
0.331
0.320
0.333
0.329
0.316
0.315
0.329
0.329
0.329
0.318
0.317
0.308
0.305
0.316
0.317
0.305
0.303
0.315
0.316
0.308
0.317
0.319
0.311
0.308
0.283
0.274
0.303
0.308
0.311
0.290
0.283
0.345
0.333
0.344
0.357
0.331
0.320
0.310
0.320
0.311
0.322
0.333
0.320
0.322
0.333
0.344
0.333
0.311
0.320
0.300
0.293
0.311
0.284
0.301
0.333
0.311
0.293
0.270
0.284
T0
4300
4300
4750
4750
5320
5320
5970
5970
5970
6650
6650
6650
8000
8000
TN
U0
UN
V0
WP
X0
XN
XP
Y0
VN
W0
YA
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
6
Color Bins
Warm White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
Q0
x
y
0.453
0.444
0.459
0.467
0.460
0.453
0.467
0.473
0.438
0.429
0.444
0.453
0.444
0.438
0.453
0.460
0.424
0.416
0.429
0.438
0.430
0.424
0.438
0.444
0.416
0.399
0.403
0.419
0.430
0.416
0.419
0.432
0.412
0.394
0.399
0.416
0.426
0.412
0.416
0.430
0.407
0.389
0.394
0.412
0.421
0.407
0.412
0.426
0.409
0.402
0.416
0.424
0.414
0.409
0.424
0.430
0.392
0.387
0.402
0.409
0.414
0.409
0.392
0.397
0.392
0.387
0.374
0.378
0.397
0.392
0.378
0.382
0.400
0.382
0.389
0.407
0.414
0.400
0.407
0.421
0.391
0.374
0.382
0.400
0.414
0.400
0.391
0.406
0.391
0.374
0.366
0.382
0.406
0.391
0.382
0.397
M0
2770
2770
2950
2950
3150
3150
3370
3370
3650
3650
3950
3950
M1
N0
N1
P0
P1
Q1
R0
R1
S0
S1
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
7
Dominant Wavelength Bin Structure
Minimum Dominant
Maximum Dominant
Wavelength (nm)
Color
Bin Code
Wavelength (nm)
613.5
620.5
620.5
631.0
2
4
Red
587.0
589.5
592.0
594.5
589.5
592.0
594.5
597.0
2
4
6
7
Amber
Green
Blue
515
520
525
530
520
525
530
535
A
1
2
3
455
460
465
470
460
465
470
475
A
1
2
3
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
8
Color Spectrum, TJ = 25°C
1. White
1.0
Standard Eye Response Cruve
0.8
White
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
2. Warm White
1.0
Standard Eye Response Cruve
Warm White
0.8
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
3. Blue、Green、Amber、Red
1.0
Green
Amber
Red
Blue
0.8
0.6
0.4
0.2
0.0
400
450
500
550
600
650
700
Wavelength(nm)
9
Light Output Characteristics
Relative Light Output vs. Junction Temperature at 700mA
160
White, Warm White
Green
Blue
140
120
100
80
60
40
20
0
-20
0
20
40
60
80
100
120
Junction Temperature, TJ (℃)
160
140
120
100
80
Red
Amber
60
40
20
0
60
100
-20
0
20
40
80
120
Junction Temperature, TJ (℃)
10
Forward Current Characteristics, TJ = 25°C
1. Forward Voltage vs. Forward Current
800
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
Red, Amber
White, Warm White,
Green, Blue,
0
2
4
6
8
10 12 14
0
2
4
6
8
10
Forward Voltage (V)
Forward Voltage (V)
2. Forward Current vs. Normalized Relative Luminous Flux
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Red, Amber
White, Warm White,
Green, Blue,
0
200
400
600
800
0
200
400
600
800
Forward Current (mA)
Forward Current (mA)
11
Ambient Temperature vs. Maximum Forward Current
1. White, Warm White, Green, Blue (TJMAX = 120°C)
800
700
600
500
RθJ-A = 10°C/W
400
RθJ-A = 8°C/W
300
RθJ-A = 7°C/W
200
RθJ-A = 5°C/W
100
0
0
25
50
75
100
125
150
Ambient Temperature (℃)
2. Red, Amber (TJMAX = 120°C)
800
700
600
500
RθJ-A = 10°C/W
RθJ-A = 8°C/W
400
300
200
100
0
RθJ-A = 7°C/W
RθJ-A = 5°C/W
0
25
50
75
100
125
150
Ambient Temperature (℃)
12
Typical Representative Spatial Radiation Pattern
Lambertian Radiation Pattern
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
Angular Displacement (Degrees)
Collimator Options
Collimator Part Number
Collimator Outline
PG1C-3N06
PG1C-3N15
PG1C-3N25
● Please refer to the relative collimator datasheet for the details.
13
Qualification Reliability Testing
Stress Conditions
Stress Test
Room Temperature
Operating Life (RTOL)
Wet High Temperature
Operating Life (WHTOL)
Wet High Temperature
Storage Life (WHTSL)
High Temperature
Stress Duration Failure Criteria
25°C, IF = max DC (Note 1)
85°C/60%RH, IF = max DC (Note 1)
85°C/85%RH, non-operating
110°C, non-operating
1000 hours
1000 hours
1000 hours
1000 hours
1000 hours
200 cycles
200 cycles
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Storage Life (HTSL)
Low Temperature
-40°C, non-operating
Storage Life (LTSL)
Non-operating
-40°C to 120°C, 30 min. dwell,
<5 min. transfer
Temperature Cycle (TMCL)
Non-operating
-40°C to 120°C, 20 min. dwell,
<20 sec. transfer
Thermal Shock (TMSK)
Notes:
1. Depending on the maximum derating curve.
2. Criteria for judging failure
Criteria for Judgement
Item
Test Condition
IF = max DC
IF = max DC
VR = 5V
Max.
Min.
--
Forward Voltage (VF)
Luminous Flux or
Initial Level x 1.1
Initial Level x 0.7
--
Radiometric Power (ΦV)
Reverse Current (IR)
50 μA
--
* The test is performed after the LED is cooled down to the room temperature.
3. A failure is an LED that is open or shorted.
14
Precaution for Use
● Storage
Please do not open the moisture barrier bag (MBB) more than one week. This may cause the
leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening
the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less
than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
● The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
● The slug is to be soldered. If not, please use the heat conductive adhesive.
● Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temperature after soldering.
● Please avoid rapid cooling after soldering.
● Components should not be mounted on warped direction of PCB.
● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a heat plate should be used. It should be confirmed beforehand whether the characteristics of
the LEDs will or will not be damaged by repairing.
● This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When cleaning is required, isopropyl alcohol should be used.
● When the LEDs are illuminating, operating current should be decide after considering the
package maximum temperature.
● The appearance, specifications and flux bin of the product may be modified for improvement
without notice. Please refer to the below website for the latest datasheets.
http://www.prolightopto.com/
Handling of Silicone Lens LEDs
Notes for handling of silicone lens LEDs
● Please do not use a force of over 3kgf impact or pressure on the silicone lens,
otherwise it will cause a catastrophic failure.
● The LEDs should only be picked up by making contact with the sides of the LED body.
● Avoid touching the silicone lens especially by sharp tools such as Tweezers.
● Avoid leaving fingerprints on the silicone lens.
● Please store the LEDs away from dusty areas or seal the product against dust.
● When populating boards in SMT production, there are basically no restrictions
regarding the form of the pick and place nozzle, except that mechanical pressure
on the silicone lens must be prevented.
● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
╳
15
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明