PM2A-1LAS [ELITE]
1W Power LED;
| 型号： | PM2A-1LAS |
| 厂家： | 
Elite Enterprises (H.K.) Co., Ltd. |
| 描述： | 1W Power LED |
| 文件： | 总20页 (文件大小：595K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technology Corporation
ProLight PM2A-1Lxx
1W Power LED
Technical Datasheet
Version: 1.6
Features
●High flux per LED
●Various colors
●Good color uniformity
●RoHS compliant
●More energy efficient than incandescent and
most halogen lamps
●Low Voltage DC operated
●Instant light (less than 100ns)
●No UV
●Superior ESD protection
Typical Applications
● Reading lights (car, bus, aircraft)
●Portable (flashlight, bicycle)
●Uplighters/Downlighters
● Decorative/Entertainment
● Bollards/Security/Garden
● Cove/Undershelf/Task
● Indoor/Outdoor Commercial and
Residential Architectural
● Automotive Ext (Stop-Tail-Turn,
CHMSL, Mirror Side Repeat)
● LCD backlights
2009/08
1
Emitter Mechanical Dimensions
TOP VIEW
BOTTOM VIEW
Notes:
1. The Anode side of the device is denoted by a hole in the lead frame.
2. Electrical insulation between the case and the board is required --- slug of device is not
electrically neutral. Do not electrically connect either the anode or cathode to the slug.
3. Drawing not to scale.
4. All dimensions are in millimeters.
5. All dimendions without tolerances are for reference only.
6. Please do not bend the leads of the LED, otherwise it will damage the LED.
7. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
2
Star Mechanical Dimensions
Notes:
1. Slots in aluminum-core PCB for M3 or #4 mounting screw.
2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote
positive and negative, respectively. All positive pads are interconnected, as are all negative pads,
allowing for flexibility in array interconnection.
3. Drawing not to scale.
4. All dimensions are in millimeters.
5. All dimendions without tolerances are for reference only.
6. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
3
Flux Characteristics at 350mA, TJ = 25°C
Lumious Flux ΦV (lm)
Part Number
Emitter
Radiation
Pattern
Color
Star
Minimum
Typical
White
Warm White
Green
PM2A-1LWE
PM2A-1LVE
PM2A-1LGE
PM2A-1LBE
PM2A-1LAE
PM2A-1LRE
PM2A-1LWS
PM2A-1LVS
PM2A-1LGS
PM2A-1LBS
PM2A-1LAS
PM2A-1LRS
76.6
67.2
58.9
10.7
30.6
30.6
90
81
70
14
42
40
Lambertian
Blue
Amber
Red
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
● Please do not drive at rated current more than 1 second without proper heat sink.
Electrical Characteristics at 350mA, TJ = 25°C
Temperature
Thermal
Coefficient of
VF (mV/ °C)
ΔVF/ ΔTJ
Resistance
Junction to
Slug (°C/ W)
Forward Voltage VF (V)
Dynamic
Resistance (Ω)
Color
Min.
Typ.
Max.
White
Warm White
Green
2.85
2.85
2.85
2.85
1.75
1.75
3.5
3.5
3.5
3.5
2.2
2.2
4.1
4.1
4.1
4.1
3.0
3.0
1.0
1.0
1.0
1.0
2.4
2.4
-2.0
-2.0
-2.0
-2.0
-2.0
-2.0
10
10
10
10
10
10
Blue
Amber
Red
Optical Characteristics at 350mA, TJ = 25°C
Temperature
Coefficient of
Dominant
Half-width Wavelength
Total
included Viewing
Angle Angle
(degrees) (degrees)
Dominant Wavelength λD,
Spectral
or Color Temperature CCT
(nm)
(nm/ °C)
Radiation
Pattern
Color
Δλ1/2
ΔλD/ ΔTJ
θ0.90V
2 θ1/2
Min.
Typ.
Max.
White
4100 K
5500 K
3300 K
525 nm
465 nm
592 nm
10000 K
4100 K
535 nm
475 nm
597 nm
631 nm
---
---
35
25
20
20
---
180
180
180
180
180
180
130
130
130
130
130
130
Warm White 2700 K
---
Green
Blue
515 nm
455 nm
587 nm
0.04
0.04
0.05
0.05
Lambertian
Amber
Red
613.5 nm 623 nm
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
● ProLight maintains a tolerance of ± 5% for CCT measurements.
4
Absolute Maximum Ratings
White/Warm White/
Parameter
Green/Blue/Amber/Red
DC Forward Current (mA)
350
500
350
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
ESD Sensitivity
±4000V (Class III)
(HBM per MIL-STD-883E Method 3015.7)
LED Junction Temperature (°C)
Aluminum-core PCB Temperature (°C)
Storage & Operating Temperature (°C)
Soldering Temperature(°C)
120
105
-40 to +105
235°C
Photometric Luminous Flux Bin Structure
Color
Bin Code
Minimum Photometric Flux (lm)
Maximum Photometric Flux (lm)
T2
U1
76.6
87.4
87.4
99.6
White
T1
T2
U1
67.2
76.6
87.4
76.6
87.4
99.6
Warm White
*When CCT is less than 3050K, U1 bin is not available.
S2
T1
T2
58.9
67.2
76.6
67.2
76.6
87.4
Green
Blue
L
M
N
10.7
13.9
18.1
13.9
18.1
23.5
Q
R
30.6
39.8
51.7
39.8
51.7
58.9
Amber
Red
S1
Q
R
30.6
39.8
51.7
39.8
51.7
58.9
S1
● ProLight maintains a tolerance of ± 10% on flux and power measurements.
● The flux bin of the product may be modified for improvement without notice.
5
Color Bin
White and Warm White Binning Structure Graphical Representation
0.48
2700 K
0.46
0.44
2850 K
3050 K
3250 K
MM
3500 K
NM
PM
3800 K
QM
M1
4100 K
N1
M0
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
RM
P1
Q1
P0
SM
4500 K
Planckian
(BBL)
N0
MA
R1
TM
Q0
S1
5000 K
NA
R0
UM
UN
VN U0
PA
TN
S0
QA
5650 K VM
RA
T0
6300 K
SA
WM
TP
Warm White
7000 K XM
XN W0
WN V0
UP
VP
X0
WP
WQ
10000 K
White
Y0
YA
XP
0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50
x
6
Color Bins
White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
W0
x
y
0.378
0.374
0.360
0.362
0.382
0.378
0.362
0.365
0.374
0.370
0.357
0.360
0.386
0.382
0.365
0.367
0.362
0.360
0.344
0.346
0.365
0.362
0.346
0.347
0.360
0.357
0.343
0.344
0.365
0.367
0.348
0.347
0.329
0.329
0.346
0.344
0.329
0.329
0.347
0.346
0.329
0.344
0.343
0.329
0.329
0.329
0.348
0.347
0.382
0.366
0.357
0.372
0.397
0.382
0.372
0.386
0.366
0.351
0.342
0.357
0.413
0.397
0.386
0.400
0.372
0.357
0.344
0.359
0.386
0.372
0.359
0.372
0.357
0.342
0.331
0.344
0.386
0.400
0.385
0.372
0.331
0.345
0.359
0.344
0.345
0.357
0.372
0.359
0.331
0.344
0.331
0.320
0.357
0.369
0.385
0.372
0.329
0.329
0.317
0.316
0.329
0.316
0.315
0.329
0.329
0.329
0.318
0.317
0.329
0.329
0.319
0.318
0.329
0.329
0.315
0.314
0.308
0.305
0.316
0.317
0.305
0.303
0.315
0.316
0.308
0.317
0.319
0.311
0.301
0.314
0.315
0.303
0.308
0.283
0.274
0.303
0.308
0.311
0.290
0.283
0.345
0.331
0.320
0.333
0.345
0.333
0.344
0.357
0.331
0.320
0.310
0.320
0.320
0.310
0.300
0.310
0.369
0.357
0.344
0.355
0.311
0.322
0.333
0.320
0.322
0.333
0.344
0.333
0.311
0.320
0.300
0.293
0.342
0.355
0.344
0.333
0.311
0.284
0.301
0.333
0.311
0.293
0.270
0.284
T0
4300
4300
4300
4300
4750
4750
4750
4750
5320
5320
5320
5320
5970
5970
5970
5970
5970
6650
6650
6650
6650
8000
8000
TN
TP
TM
U0
UN
UP
UM
V0
WN
WP
WQ
WM
X0
XN
XP
XM
Y0
VN
VP
VM
YA
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
7
Color Bins
Warm White Bin Structure
Typ. CCT
(K)
Typ. CCT
(K)
Bin Code
x
y
Bin Code
Q0
x
y
0.453
0.444
0.459
0.467
0.460
0.453
0.467
0.473
0.459
0.444
0.436
0.451
0.471
0.460
0.473
0.486
0.438
0.429
0.444
0.453
0.444
0.438
0.453
0.460
0.444
0.429
0.422
0.436
0.454
0.444
0.460
0.471
0.424
0.416
0.429
0.438
0.430
0.424
0.438
0.444
0.429
0.416
0.410
0.422
0.438
0.430
0.444
0.454
0.416
0.399
0.403
0.419
0.430
0.416
0.419
0.432
0.403
0.399
0.384
0.389
0.451
0.430
0.432
0.455
0.412
0.394
0.399
0.416
0.426
0.412
0.416
0.430
0.399
0.394
0.379
0.384
0.446
0.426
0.430
0.451
0.407
0.389
0.394
0.412
0.421
0.407
0.412
0.426
0.394
0.389
0.374
0.379
0.440
0.421
0.426
0.446
0.409
0.402
0.416
0.424
0.414
0.409
0.424
0.430
0.416
0.402
0.396
0.410
0.421
0.414
0.430
0.438
0.392
0.387
0.402
0.409
0.414
0.409
0.392
0.397
0.387
0.383
0.396
0.402
0.421
0.414
0.397
0.402
0.392
0.387
0.374
0.378
0.397
0.392
0.378
0.382
0.387
0.383
0.370
0.374
0.402
0.397
0.382
0.386
0.400
0.382
0.389
0.407
0.414
0.400
0.407
0.421
0.389
0.382
0.367
0.374
0.433
0.414
0.421
0.440
0.391
0.374
0.382
0.400
0.414
0.400
0.391
0.406
0.374
0.360
0.367
0.382
0.433
0.414
0.406
0.423
0.391
0.374
0.366
0.382
0.406
0.391
0.382
0.397
0.374
0.360
0.351
0.366
0.423
0.406
0.397
0.413
M0
2770
2770
2770
2770
2950
2950
2950
2950
3150
3150
3150
3150
3370
3370
3370
3370
3650
3650
3650
3650
3950
3950
3950
3950
M1
MA
MM
N0
Q1
QA
QM
R0
R1
RA
RM
S0
N1
NA
NM
P0
P1
S1
PA
PM
SA
SM
● Tolerance on each color bin (x , y) is ± 0.01
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
8
Dominant Wavelength Bin Structure
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
Color
Bin Code
A
1
2
3
515
520
525
530
520
525
530
535
Green
A
1
2
3
455
460
465
470
460
465
470
475
Blue
2
4
6
7
587.0
589.5
592.0
594.5
589.5
592.0
594.5
597.0
Amber
Red
2
4
613.5
620.5
620.5
631.0
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
9
Forward Voltage Bin Structure
Color
Bin Code
Minimum Voltage (V)
Maximum Voltage (V)
A
B
D
E
F
2.85
3.10
3.35
3.60
3.85
3.10
3.35
3.60
3.85
4.10
White
A
B
D
E
F
2.85
3.10
3.35
3.60
3.85
3.10
3.35
3.60
3.85
4.10
Warm White
A
B
D
E
F
2.85
3.10
3.35
3.60
3.85
3.10
3.35
3.60
3.85
4.10
Green
A
B
D
E
F
2.85
3.10
3.35
3.60
3.85
3.10
3.35
3.60
3.85
4.10
Blue
A
B
D
E
F
1.75
2.00
2.25
2.50
2.75
2.00
2.25
2.50
2.75
3.00
Amber
A
B
D
E
F
1.75
2.00
2.25
2.50
2.75
2.00
2.25
2.50
2.75
3.00
Red
● ProLight maintains a tolerance of ± 0.1 for Voltage measurements.
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
10
Color Spectrum, TJ = 25°C
1. White
1.0
0.8
Standard Eye Response Cruve
White
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
2. Warm White
1.0
Standard Eye Response Cruve
Warm White
0.8
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
3. Blue、Green、Amber、Red
1.0
0.8
0.6
0.4
0.2
0.0
Blue
Green
Amber
Red
400
450
500
550
600
650
700
Wavelength(nm)
11
Light Output Characteristics
Relative Light Output vs. Junction Temperature at 350mA
160
White, Warm White
Green
Blue
140
120
100
80
60
40
20
0
-20
0
20
40
60
80
100
120
Junction Temperature, TJ (℃)
160
140
120
100
80
Red
Amber
60
40
20
0
-20
0
20
40
60
80
100
120
Junction Temperature, TJ (℃)
12
Forward Current Characteristics, TJ = 25°C
1. Forward Voltage vs. Forward Current
400
350
300
250
200
150
100
50
400
350
300
250
200
150
100
50
Red, Amber
White, Warm White,
Green, Blue
0
0
0 0.5 1 1.5 2 2.5 3 3.5 4
Forward Voltage (V)
0
0.5
1
1.5
2
2.5
3
Forward Voltage (V)
2. Forward Current vs. Normalized Relative Luminous Flux
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Red, Amber
White, Warm White,
Green, Blue
0
100
200
300
400
0
100
200
300
400
Forward Current (mA)
Forward Current (mA)
13
Ambient Temperature vs. Maximum Forward Current
1. White, Warm White, Green, Blue (TJMAX = 120°C)
400
350
300
250
RθJ-A = 60°C/W
200
RθJ-A = 50°C/W
150
RθJ-A = 40°C/W
100
RθJ-A = 30°C/W
50
0
0
25
50
75
100
125
150
Ambient Temperature (℃)
2. Red, Amber (TJMAX = 120°C)
400
350
300
250
RθJ-A = 60°C/W
RθJ-A = 50°C/W
200
150
100
50
RθJ-A = 40°C/W
RθJ-A = 30°C/W
0
0
25
50
75
100
125
150
Ambient Temperature (℃)
14
Typical Representative Spatial Radiation Pattern
Lambertian Radiation Pattern
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
Angular Displacement (Degrees)
15
Qualification Reliability Testing
Stress Test
Room Temperature
Operating Life (RTOL)
Wet High Temperature
Operating Life (WHTOL)
Wet High Temperature
Storage Life (WHTSL)
High Temperature
Stress Conditions
Stress Duration Failure Criteria
25°C, IF = max DC (Note 1)
85°C/60%RH, IF = max DC (Note 1)
85°C/85%RH, non-operating
110°C, non-operating
1000 hours
1000 hours
1000 hours
1000 hours
1000 hours
200 cycles
200 cycles
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Note 3
Note 3
Note 3
Storage Life (HTSL)
Low Temperature
-40°C, non-operating
Storage Life (LTSL)
Non-operating
-40°C to 120°C, 30 min. dwell,
<5 min. transfer
Temperature Cycle (TMCL)
Non-operating
-40°C to 120°C, 20 min. dwell,
<20 sec. transfer
Thermal Shock (TMSK)
1500 G, 0.5 msec. pulse,
5 shocks each 6 axis
Mechanical Shock
Natural Drop
On concrete from 1.2 m, 3X
Variable Vibration
Frequency
10-2000-10 Hz, log or linear sweep rate,
20 G about 1 min., 1.5 mm, 3X/axis
Steam age for 16 hrs., then solder dip
at 260°C for 5 sec.
Solder coverage
on lead
Solderability
Notes:
1. Depending on the maximum derating curve.
2. Criteria for judging failure
Criteria for Judgement
Item
Test Condition
Min.
-
Max.
Forward Voltage (VF)
IF = max DC
IF = max DC
Initial Level x 1.1
Luminous Flux or
Radiometric Power (ΦV)
Reverse Current (IR)
Initial Level x 0.7
-
VR = 5V
-
50 μA
* The test is performed after the LED is cooled down to the room temperature.
3. A failure is an LED that is open or shorted.
16
Recommended Solder Pad Design
● All dimensions are in millimeters.
● Electrical isolation is required between Slug and Solder Pad.
17
Heat Plate Soldering Condition
(1) Soldering Process for Solder Paste
(2) Soldering Process for Solder Wire
Solder Paste
MCPCB
Heat Plate
MCPCB
Put MCPCB on Heat Plate.
Use Solder Mask to print Solder Paste on MCPCB.
Solder Wire
Emitter
Heat Plate
Place Solder Wire to the solder pad of MCPCB.
Place Emitter on MCPCB.
Emitter
Heat Plate
Heat Plate
Put MCPCB on Heat Plate until Solder Paste melt.
The Solder Paste sould be melted within 10 seconds.
Take out MCPCB out from Heat Plate within 15 seconds.
Put Emitter on MCPCB. Take the MCPCB out
from Heat Plate within 10 seconds.
● Heat plate temperature: 230°C max for Lead Solder and 230°C max for Lead-Free Solder.
● We recommend using the 58Bi-42Sn eutectic alloy for low-temp. and lead free soldering (melting point = 138 °C).
● When soldering, do not put stress on the LEDs during heating.
● After soldering, do not warp the circuit board.
Manual Hand Soldering
Solder Wire
Thermal Conductive Glue
Soldering Iron
MCPCB
Emitter
Use Soldering Iron to solder the
leads of Emtter within 5 seconds.
Place Emitter on the MCPCB.
Place Thermal Comductive Glue
on the MCPCB.
● For prototype builds or small series production runs it possible to place and solder the emitters by hand.
● Solder tip temperature: 230°C max for Lead Solder and 260°C max for Lead-Free Solder.
● Avoiding damage to the emitter or to the MCPCB dielectric layer. Damage to the epoxy layer can cause
a short circuit in the array.
● Do not let the solder contact from solder pad to back-side of MCPCB. This one will cause a short circuit
and damage emitter.
18
Emitter Tube Packaging
Star Tube Packaging
Notes:
1. Emitter 50 pieces per tube and Star 20 pieces per tube.
2. Drawing not to scale.
3. All dimensions are in millimeters.
4. All dimendions without tolerances are for reference only.
**Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads
of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB.
The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH.
19
Precaution for Use
● Storage
Please do not open the moisture barrier bag (MBB) more than one week. This may cause the
leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening
the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less
than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
● The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
● The slug is to be soldered. If not, please use the heat conductive adhesive.
● Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temperature after soldering.
● Please avoid rapid cooling after soldering.
● Components should not be mounted on warped direction of PCB.
● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a heat plate should be used. It should be confirmed beforehand whether the characteristics of
the LEDs will or will not be damaged by repairing.
● This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When cleaning is required, isopropyl alcohol should be used.
● When the LEDs are illuminating, operating current should be decide after considering the
package maximum temperature.
● The appearance, specifications and flux bin of the product may be modified for improvement
without notice. Please refer to the below website for the latest datasheets.
http://www.prolightopto.com/
20
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明