1622A-079-FC-1291-06 [EMCORE]
1622 CWDM DFB Laser Module; 1622 CWDM DFB激光器模块型号: | 1622A-079-FC-1291-06 |
厂家: | EMCORE CORPORATION |
描述: | 1622 CWDM DFB Laser Module |
文件: | 总6页 (文件大小:635K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
The 1622 ITU G.695 compliant CWDM forward path DFB laser components are
designed for both broadcast and narrowcast analog applications. The highly
linear, OC-48 pinout compatible components feature options for up to 20 mW of
minimum optical output power with superior distortion performance over an
enhanced temperature range of -40C to +85C.
Performance Highlights
Applications
Min
Typical
Max
Units
CWDM Forward Path
1287
1307
1327
1347
1367
1291
1311
1331
1351
1371
1295
1315
1335
1355
1375
Broadcast and Narrowcast Networks
CWDM Cuts New Fiber Costs
High Optical Splits
Wavelength
nm
4
6
Features
OC-48 Pinout Compatible
8
Telcordia TechnologiesTM 468
Compliant
Optical Output Power
10
13
16
20
-
-
mW
Up to 79 Channel Count
Up to 20 mW
Wide Temperature Range – Stable even
in Harsh Environments
Temperature Range
-40
5
-
-
-
-
-
+85
1002
-
C
MHz
dB
Frequency Range
Carrier to Noise Ratio
51
-
Composite Second Order (1622B versions)
Composite Triple Beat
-59
-65
dBc
dBc
-
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect
device reliability.
Parameter
Symbol
Condition
Min
Max
Unit
Operating Temperature Range
Storage Temperature Range
Laser Forward dc Current
Photodiode Reverse Voltage
Laser Reverse Voltage, dc
ESD
Continuous
-40
+85
°C
°C
mA
V
T
c
TSTG
-
-40
+85
150
10
-
VRPD
-
-
-
-
-
-
-
1
V
-
HBM: R = 1500 Ohm, C = 100pF
Continuous
-500
-1.9
500
1.9
V
TEC Current
ITEC
A
Electrical/Optical Characteristics
Laser Temperature (TL) = 25oC, IF=IOP, Beginning of Life (BOL)
Parameter
Symbol
Condition
Min
Typ
Max
Unit
1290 nm option
1310 nm option
1330 nm option
1351 nm option
1371 nm option
1287
1307
1327
1347
1367
1291
1311
1331
1351
1371
1295
1315
1335
1355
1375
Wavelength
nm
-04 version
-06 version
-08 version
-10 version
-13 version
-16 version
-20 version
4
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8
Optical Output Power
-
10
13
16
20
mW
Optical Isolation
ISO
SMSR
ITH
-
30
35
-
-
-
-
-
-
-
dB
dB
Side-Mode Suppression Ration
Threshold Current
-
-
-
20
120
200
mA
Operating Current
IOP
Varies with power option
VRM=5V
-
mA
Monitor PD Responsivity
rPD
10
μA/mW
n
Points measured @
Slope Efficiency
0.084
-
-
mW/mA
IF = ITH + 20 and ITH +60
Thermistor Resistance
Thermistor Temp. Coefficient
TEC Current
RTH
TOP=25°C
9.5
10
-4.4
-
10.5
KOhm
%/C
A
TCTH
-
-1.5
1.0
-
-
16
-
TOP=25 C
-40<TC<+85oC, IF = 100 mA
ITEC
Fiber Length
-
-
-
May include splice
1.5
M
Fiber Buffer
-
-
900
9/125
-
m
Fiber Core/Cladding
-
-
m
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
RF Characteristic
Laser Temperature (TL) = 25oC, IF=IOP, Beginning of Life (BOL)
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Frequency Range
F
-
5
-
-
-
-
1002
+0.75
-
MHz
dB
Frequency Response
Carrier-to-Noise Ratio
S21
Iop = 60 mA, 5 - 1002 MHz
-
CNR
CSO(1)
51
dB
Standard Options (1622A)
Enhanced Options (1622B)
-
-
-
-
-56
-59
dBc
dBc
Comp. Second Order
CTB (1)
RIN
Composite Triple Beat
Relative Intensity Noise
3.2% OMI, 79 ch. NTSC
1622A & 1622B
-
-
-
-
-65
-
dBc
<-155
dB/Hz
In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at
least 55 dB for discrete reflections and 30 dB for distributed reflections.
(1) Distortion performance assumes 0km dispersion.
Outline Drawing (dimensions are in inches & mm)
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
Electrical Schematics
Figure 1. 1622 CWDM Laser Schematic
Figure 2. 1622 CWDM Circuit Schematic
Pin Definitions
Pin
1
Description
Thermistor
2
Thermistor
3
4
5
6
7
8
Dc Laser Bias (-)
MPD Anode (-)
MPD Cathode (+)
Thermal Electric Cooler (+)
Thermal Electric Cooler (-)
Case Ground
9
Case Ground
10
11
12
13
14
NC
Laser Common (+)
Laser Modulation (-)
Laser Common (+)
NC
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1 laser
product. This device has been classified with the FDA/CDRH under accession number 0220191.
All Versions of this laser are Class 1 laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.3 m.
Maximum power = 50 mW.
Because of size constraints, laser safety labeling (including an FDA class 1 label) is not affixed to the module, but attached
to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous
laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
INVISIBLE LASER
AVOID DRIARDEICATTEIOXNPOSURE TO BEAM
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
Wavelength: 1.3
m
Max. Output: 50 mW,
Class 1 Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
m
Wavelength: 1.3
Class 1 Laser Product IEC-60825-1:20007 Max. Output:50 mw
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1622 CWDM DFB Laser Module
DATASHEET | APRIL 2013
FIBER OPTICS
Ordering Code Definitions
1622x – www – aa – yyyy – zz
Family Name
Analog O-Band CWDM DFB, Laser
CSO Performance
X = A Standard Performance
X = B Enhanced Performance (CSO)
Frequency Plan
www = 079: 79 Channel NTSC
Optical Connector
aa = FC: FC/APC
aa = SC: SC/APC
Center Wavelength
yyyy = 1291: 1291 nm
yyyy = 1311: 1311 nm
yyyy = 1331: 1331 nm
yyyy = 1351: 1351 nm
yyyy = 1371: 1371 nm
Minimum Optical Power
zz = 04: 4 mW
zz = 06: 6 mW
zz = 08: 8 mW
zz = 10: 10 mW
zz = 13: 13 mW
zz = 16: 16 mW
zz = 20: 20 mW
Example
1622B-79-SC-1331-10: CWDM Laser, Enhanced performance, 79 channel NTSC, SC/APC connector, 1331
nm center wavelength, 10 mW minimum optical power.
|
REV 2013.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明