2510A-030 [EMCORE]

Fiber Optic Device;
2510A-030
型号: 2510A-030
厂家: EMCORE CORPORATION    EMCORE CORPORATION
描述:

Fiber Optic Device

文件: 总8页 (文件大小:823K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DATASHEET | JULY 8, 2004  
Microwave PIN Photodiode Receivers  
The Ortel family of microwave photodiode receivers is ideally suited for  
use in analog fiber-optic communications. With their wide bandwidth  
and flat response, these devices are used in a wide array of  
applications, including antenna remoting, timing and reference signal  
distribution, measurement, delay lines, and two-way communications.  
Several packaging styles are available for these microwave  
photodiodes. The most basic package, the photodiode module, contains  
the photodiode chip, optical fiber pigtail, and impedance-matched  
electrical connections in a hermetically sealed unit. Of particular note is  
the high optical return loss, which enables high-quality noise  
performance for sensitive optical links.  
In most cases, the basic photodiode module is integrated into a  
complete receiver, packaged either as a flange-mount for extreme  
environments, or as a plug-in for integration with Ortel’s System 10000  
rack-mountable chassis and power supplies. Electronics within flange-  
mount and plug-in receivers bias the photodiodes and monitor the dc  
level of the optical input power, thus providing a fully integrated  
microwave product.  
Applications  
Antenna Remoting  
Cellular and PCS networks  
Military triband  
communications  
Tracking, Telemetry and  
Control (TT&C)  
Performance Highlights  
Features  
High dynamic range  
Min  
Typical Max  
Units  
Long distance  
communications  
Wavelength  
1290  
-
1580  
nm  
10 MHz to 20 GHz bandwidth  
Optical Input Power  
Standard  
-
-
-
-
2
mW  
mW  
Dual 1310 nm/1550 nm  
High Power  
15  
window  
Total Operating Current  
Standard  
Y2K compliant, CE certified  
-
-
100  
+65  
mA  
High Power  
Temperature Range  
Frequency Range  
-40  
10  
-
-
°C  
20000 MHz  
See following pages for complete specifications and conditions.  
For more information on this and other products:  
Contact Sales at Ortel 626-293-3400, or visit www.emcore.com.  
DATA SHEET| JULY 8, 2004  
Microwave PIN Photodiode Receivers  
Absolute Maximum Ratings  
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are  
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in  
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for  
extended periods can adversely affect device reliability.  
Parameter  
Symbol  
Condition  
Min  
Max  
Units  
Operating Temperature Range of Baseplate:  
Module and Flange Mount  
Plug-in  
TOP  
continuous  
-40  
0
+65  
+50  
°C  
°C  
Storage Temperature  
Module and Flange Mount  
Plug-in  
TSTG  
-
-40  
-20  
+85  
+65  
°C  
°C  
Optical Input Power  
2510A/B, 2515A/B, 2516A/B/C  
2518A/B  
PIN  
-
-
-
-
2.5  
16  
mW  
mW  
dc Current  
2510A/B, 2515A/B, 2516A/B/C  
2518A/B  
IDC  
-
2
12  
mA  
mA  
Electrical/Optical Characteristics  
Optical  
Parameter  
Specifications  
Model Number  
Module  
2510A/B1  
4510A/B1  
2515A/B1  
4515A/B1  
2516A/B/C1  
4516A/B/C1  
2518A/B  
4518A/B  
10458A/B  
Flange-mount Rx  
Plug-in Rx  
10450A/B1 10455A/B1 10456A/B/C1  
dc Responsivity  
>0.75 A/W >0.75 A/W  
>0.85 A/W >0.85 A/W  
>0.65 A/W  
>0.75 A/W  
>0.70 A/W  
>0.80 A/W  
at 1310 nm, 25°C  
at 1550 nm, 25°C  
RF Receiver Efficiency (typ) at 1 GHz2  
at 1310 nm  
>0.38  
>0.42  
>0.38  
>0.42  
>0.33  
>0.38  
>45 dB  
>0.35  
>0.40  
at 1550 nm  
Optical Return Loss3  
Optical Input Power  
15 mW  
2 mW  
2 mW  
2 mW  
>1 m, 9 µm/125 µm single-mode SMF-284 or equivalent  
Pigtail Fiber Type (where applicable)  
1. Specified for < 2mW optical power, < 50% modulation depth  
2. The photodiode RF current splits evenly between the internal matching resistor and the external load.  
(See Ortel’s, System Designer’s Guide to RF and Microwave Fiber Optics)  
3. Optical return loss specified for APC connectors or fusion splices only. Other connection methods can degrade optical return loss.  
4. SMF-28 is a trademark of Corning Incorporated.  
For more information on this and other products:  
Contact Sales at Ortel 626-293-3400, or visit www.emcore.com.  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
RF Characteristics  
Parameter  
Specifications  
Model Number  
Module  
2510A/B  
4510A/B  
10450A/B  
2515A/B  
2516A/B/C  
4516A/B/C  
10456A/B/C  
2518A/B  
4518A/B  
10458A/B  
Flange-mount Rx  
Plug-in Rx  
4515A/B  
10455A/B  
Maximum Frequency  
A
B
C
3 GHz  
6 GHz  
-
10 GHz  
12 GHz  
-
20 GHz  
18 GHz  
15 GHz  
15 GHz  
10 GHz  
-
Minimum Frequency  
Output Coupling  
0.1 GHz  
DC  
0.1 GHz  
AC  
+1, -3 dB  
1 GHz  
AC  
0.5 GHz  
AC  
+1, -3 dB  
Amplitude Flatness 1  
± 2.0 dB  
± 2.0 dB  
Output VSWR  
2.0:1  
0.1 – 6 GHz  
-
0.1 – 10 GHz  
10 – 12 GHz  
1 – 18 GHz  
18 – 20 GHz  
0.5 – 15 GHz  
-
2.5:1  
Output Impedance  
50 Ω  
1. Relative to value at 1 GHz  
Connector Options  
Parameter  
Specifications  
Model Number  
Module  
2510A/B  
4510A/B  
10450A/B  
2515A/B  
2516A/B/C  
4516A/B/C  
10456A/B/C  
2518A/B  
Flange-mount Rx  
Plug-in Rx  
4515A/B  
4518A/B  
10455A/B  
10458A/B  
RF Connector  
Laser Module  
Flange Mount  
Plugin  
SMA (f)  
SMA (f)  
SMA (f)  
SMA (f)  
SMA (f)  
SMA (f)  
k-conn (f)1  
SMA (f)  
SMA (f)  
k-conn (f)1  
SMA (f)  
SMA (f)  
1. K-connector is a trademark of Anritsu Company. K-connectors are SMA compatible  
DC (Photodiode Module)  
Parameter  
Symbol  
Condition  
Min  
Typ  
Max  
Unit  
Photodiode Bias  
2510A/B, 2515A/B, 2516A/B/C  
2518A/B  
IDC  
-
-
-
-
2
12  
mA  
mA  
25°C  
Forward Voltage  
2510A/B, 2515A/B, 2518A/B  
2516A/B/C  
VF  
-
-
10  
5
-
V
V
DC (Flange-mount / Rack-mount)  
Pin Number  
Min  
Typ  
Max  
Max Ripple  
Current  
1
4
15V  
16  
100 mV p-p  
0.2 A max  
3 of 8  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
Electrical Schematic  
2510A/B  
2515A/B  
H
F E D C B A  
H
F E D C B A  
R2  
R3  
C2  
R2  
RF  
RF  
R1  
Out  
C1  
Out  
C1  
50  
R1  
50Ω  
Pin Information: 2510A/B, 2515A/B  
Pin No.  
Description  
NC  
A
B
C
D
E
F
NC  
NC  
NC  
Bias  
Ground  
NC  
H
2516A/B/C, 2518A/B  
Pin Information: 2516A/B/C, 2518A/B  
6
5
4
3
2
1
Pin No. Description  
1
2
3
4
5
6
NC  
NC  
NC  
Bias  
NC  
Ground  
C2  
R2  
150Ω  
C1  
R1  
50Ω  
4 of 8  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
Outline Diagram  
Dimensions are in inches.  
2510A/B, 2515A/B Receivers  
2516A/B/C, 2518A/B Receivers  
5 of 8  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
10450A/B, 10455A/B, 10456A/B/C, 10458A/B Receivers  
4510A/B, 4515A/B, 4516A/B/C, 4518A/B Receivers  
6 of 8  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
Pin/Package Information  
Nine-Pin D-sub Connector (10450A/B, 10455A/B, 10456A/B/C, 10458A/B, and 4510A/B, 4515A/B, 4516A/B/C,  
4518A/B Receivers)  
Pin No.  
Description  
1
2
3
4
5
6
7
8
9
+15 Vdc  
NC  
NC  
Power Ground  
Reference Ground  
Optical Current Monitor  
Low Optical Power Alarm1  
NC  
NC  
1. Open collector outputs  
Front Panel LEDs  
Power on  
Optical Power Received (plug-ins only)  
dc Monitor Voltages  
dc Photocurrent, pin6  
o 1V/mA ±2% accuracy (into 1 Mload). Proportional to laser output power  
Alarm Circuits  
The alarms are open-collector outputs capable 20 mA when active and withstanding 15V when off.  
Low optical Power, pin-7  
o Sinks current when power drops below approximately 0.1 mW.  
7 of 8  
ORTEL, A division of EMCORE  
DATA SHEET| JANUARY 13, 2004  
Microwave PIN Photodiode Receivers  
Ordering Information  
Package Type  
Option  
Connector/Pigtail  
Module  
Flange  
Plug-in  
-020  
-021  
-022  
-023  
-026  
-028  
-030  
-031  
-032  
FC/APC Bulkhead Optical Connector  
FC/SPC Bulkhead Optical Connector*  
-
-
X
X
X
X
X
X
-
X
X
X
X
X
X
-
FC/APC Optical Connector/ 3mm Fiber Pigtail  
FC/SPC Optical Connector/ 3mm Fiber Pigtail  
FC/PC Bulkhead Optical Connector  
-
-
-
FC/PC Optical Connector/ 3mm Fiber Pigtail  
No Optical Connector/900 µm Buffered Fiber  
FC/PC Optical Connector/900 µm Buffered Fiber  
FC/APC Optical Connector/900 µm Buffered Fiber  
-
X
X
X
-
-
-
-
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of  
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.  
Ortel, a division of EMCORE  
2015 West Chestnut Street  
Alhambra, California 91803-1542  
Tel: 626-293-3400  
Fax: 626-293-3423  
Copyright 2003. EMCORE Corporation  
www.emcore.com  
DS. Microwave DFB Laser Transmitters  

相关型号:

2510A-031

FIBER OPTIC RECEIVER
ETC

2510A-032

FIBER OPTIC RECEIVER
ETC

2510A-10

PCB Terminal,
WINCHESTER

2510A-112

PCB Terminal,
WINCHESTER

2510A-14

PCB Terminal,
WINCHESTER

2510A-17

PCB Terminal,
WINCHESTER

2510A-18

PCB Terminal,
WINCHESTER

2510A-181

PCB Terminal,
WINCHESTER

2510A-33

PCB Terminal,
WINCHESTER

2510A-45

PCB Terminal
WINCHESTER

2510A-51

PCB Terminal,
WINCHESTER

2510A-55

PCB Terminal,
WINCHESTER