3955-1550-C-08 [EMCORE]
Laser Diode, 1550nm, ROHS COMPLIANT, HERMETIC SEALED, TO-CAN PACKAGE-4;型号: | 3955-1550-C-08 |
厂家: | EMCORE CORPORATION |
描述: | Laser Diode, 1550nm, ROHS COMPLIANT, HERMETIC SEALED, TO-CAN PACKAGE-4 |
文件: | 总6页 (文件大小:855K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
EMCORE’s Model 3955 DFB laser in TO-can offers a low cost solution for linear
fiberoptic links. These components can be cooled with external thermo-electric
coolers for high stability, or run without TEC’s to reduce power consumption. The
DFB laser in TO-can builds upon Ortel’s long history of high performance, leading
edge designs in CATV, CWDM, wireless, and high speed digital applications. The
laser diode chip is mounted on a compact hermetic TO-can assembly together
with monitor photodiode and isolator, for flexible integration into the pigtail
package configuration.
Performance Highlights
Applications
V ideo S ignal D istribtuion in H F C and
F T T x N odes
Parameters
Operating Case Temperature Range
Frequency Range
Min
-40
5
Typical
Max
85
Units
°C
-
-
-
-
-
CW D M
4000
-
MHz
mW/mA
nm
S ignal D istribution in L -B and and
W ireless Remoting L ink s
Slope Efficiency
0.35
1467
30
Center Wavelength
1610
-
H igh L inearity, L ow P ower F iber L ink s
Side Mode Suppression Ratio, CW
dB
Features
L inear D F B L aser D esign
B andwidth > 4 0 0 0 MH z
RoH S Compliance
Optical Isolator
Monitor P hotodiode
A speric L ens
H igh S lope Efficiency
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
Absolute Maximum Ratings1
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect
device reliability.
Parameters
Storage Temperature
Symbol
TSTG
TOP
IOP
Condition/Notes
Non-Operating
Continuous
CW
Min
Max
85
Unit
oC
oC
-40
Operating Case Temperature
Laser Diode Forward Current
Laser Diode Reverse Voltage
Photodiode Forward Current
Photodiode Reverse Voltage
Average RF Input Power
Lead Soldering Temperature/Time
Relative Humidity
-40
85
-
150
1.0
mA
V
VR
Continuous
Continuous
Continuous
60 Seconds
-
-
IMPD
VMPD,R
PIN
-
-
2
mA
V
-
10
-
62
dBmV
oC/sec
%
-
-
260/10
85
RH
Continuous
Human Body Model
ESD
-
-500
+500
V
1. Absolute maximum data are limited to system design only; proper device performance is not guaranteed over rating
listed above. Operation beyond these maximum conditions may degrade device performance, lead to device failure, shorter
lifetime, and will invalidate the device warranty.
Electrical/Optical Characteristics
Parameters
Series Resistance
Symbol
RS
Conditions/Notes
Between IF = 20 and 80 mA
At laser threshold
-
Min
Typ
Max
8
Unit
Ohm
V
Note
2
-
-
Forward Voltage
VF
-
-
1.8
15
-
Threshold Current
Slope Efficiency
ITh
8
-
mA
W/A
µA
SE
-
0.35
200
-
1
Monitor Current
IMon
If = 40 mA, VMPD = 5 Vdc
VMPD = 5 Vdc
-
2000
50
1
Monitor Dark Current
Linearity
IMon,dark
Lη
-
nA
Between 30 and 80 mA
Iop, Top = 25ºC
2
Center Emission Wavelength
Spectral Width
λC
-
-
-
-
-
±2 nm
nm
3,4
3,4
3,4
∆λ
1.0
-
-
SMSR
-
30
40
dB
Side Mode Suppression Ratio
1. Slope efficiency is measured in a current range between Ith + 5 mA and Ith + 65 mA.
2. Linearity is calculated by first determining slopes of five sequential pairs of points along the linear portion of the
POC vs. IF curve (η1, η2, ... , η5) in the drive current range (30mA and 80 mA). The difference between the maximum and
minimum of these slopes divided by the slope efficiency (defined as the slope of linear regression) defines Linearity.
Maxη1,η2 ,.....,η5
− Min
η
η1,η2 ,.....,η5
Lη =
3. Spectrum is measured using an optical spectrum analyzer with a spectral resolution better than 0.1 nm.
4. Lot sample test at 20%.
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
Package Outline Drawing
8.6mm Focal Length Option
10.1mm Focal Length Option
1. All the isolated pins (2, 3, and 4) shall be completed isolated from the case, no shortage between the ground pin
(pin 1)and all other three pins.
2. Dimensional tolerances
a.Chip location in relative to the TO header center shall be within +/-30um in both X & Y direction, and +/-30 um in
z-direction (axial).
b. Cap concentricity in relative to the TO header shall be within 50 um in radius.
c. Lead length: 14mm +/-0.5mm
All parts will have ink marking on the side of the base of the TO-56 with the following description.
Ink Marking
A38
Part Description
TO-can, CWDM DFB, RoHS, 8.6mm, Pinout A
TO-can, CWDM DFB, RoHS, 8.6mm, Pinout C
TO-can, CWDM DFB, RoHS, 10.1mm, Pinout A
TO-can, CWDM DFB, RoHS, 10.1mm, Pinout C
A41
A46
A47
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
Pinout Configurations
Schematic and Pinout A
Pin Definitions for Pinout A
3
Pin
Description
LD Anode, Case Ground
LD Cathode
PD
1
2
3
4
4
LD
2
PD Cathode
1
PD Anode
Pinout A
Bottom View
Schematic and Pinout C
Pin Definitions for Pinout C
Pin
1
Description
Case
2
LD Cathode
3
PD Anode
4
LD Anode, PD Cathode
Bottom View
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1 laser
product. This device has been classified with the FDA/CDRH under accession number 0220191.
All Versions of this laser are Class 1 laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Wavelength = 1.5 µm.
Maximum power = 50 mW.
Because of size constraints, laser safety labeling (including an FDA class 1 label) is not affixed to the module, but attached
to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous
laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER RADIATION
Avoid direct exposure to beam
AVOID DIRECT EXPOSURE TO BEAM
Do not view beam directly with
µ
m
Wavelength: 1.5
optical instruments
Max. Output: 30 mW,
Class 1 Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
µ
m
Class 1 Laser Product IEC-60825-1:20007 Max. Output:30 mw
Wavelength: 1.5
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
3955 D F B 1 550 n m L a s e r in T O -c a n
DATASHEET | APRIL 2012
FIBER OPTICS
Ordering Code Definitions
3955 – xxxx – y – zz
Family Name
3955: O-Band CWDM DFB Laser in TO-can
Center Wavelength Options
xxxx = 1470: 1470 nm
xxxx = 1490: 1490 nm
xxxx = 1510: 1510 nm
xxxx = 1530: 1530 nm
xxxx = 1550: 1550 nm
xxxx = 1570: 1570 nm
xxxx = 1590: 1590 nm
xxxx = 1610: 1610 nm
Pinout Options
y = A: Pinout A
y= C: Pinout C
Focal Length Options
zz= 08: 8.6mm Focal Length
zz= 10: 10.1mm Focal Length
Example
3955-1550-A-08: 1550nm Laser in TO-can, Pinout A, 8.6mm Focal Length.
3955-1550-A-10: 1550nm Laser in TO-can, Pinout A. 10.1mm Focal Length
|
REV 2012.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明