7100-00-XX04-11111 [EMCORE]

SNMPv2 Control Interface;


型号：	7100-00-XX04-11111
厂家：	EMCORE CORPORATION
描述：	SNMPv2 Control Interface
文件：	总5页 (文件大小：532K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Medallion 7100 Series CATV Fiber Amplifier

Erbium Doped Fiber Amplifier (EDFA)

DATASHEET | MARCH 2014

FIBER OPTICS

The Medallion 7100 series product line is a family of state-of-the-art high

performance CATV Erbium Doped Fiber Amplifiers (EDFA). Packaged in

convenient 1 RU housing, this line of fiber amplifiers has been design optimized

for superior output power stability and the exceptionally low noise figures

demanded by CATV applications.

The Medallion 7100 provides very stable optical outputs over a wide operating

temperature range. Internally it is supported with input and output isolators for

enhanced system stability and performance. Optical power is continuously

monitored at the input and output for automatic power control during operation

over a wide operating temperature range.

Applications

CATV Supertrunking

High Power Distribution Networks

Redundant Ring Architectures

FTTx Networks

The Medallion 7100 offers a full range of flexible configurations and a rich set of

features. These include remote management capability through SNMPv2, Telnet

and a resident Web Server. The Medallion 7100 also supports MIBs specified by

SCTE (Society of Cable Television Engineers) for this product class. For local

management, an RS-232 port is standard, along with a convenient front panel

control menu provided on a Vacuum Fluorescent Display (VFD).

Features

High Saturation Output Power up to

27 dBm (Pre-Splitter)

Dual Power Supplies, Redundant &

Hot Swappable – AC or DC

High Level Features

Front Panel Optical Input & Output

Monitor Ports

Automatic Power Control and/or Automatic Gain Control Modes

Port Count, Optical Power, and Connector Style Options

Gain Flattened Options for WDM Applications

SNMPv2 Control Interface

Web Server

IPv4 10/100bT

Low Noise Figure for CATV

Wide Input Dynamic Range

Monitors & Alarms

Loss of Input Signal

Very Stable Output Power Over a Wide

Operating Temperature Range

Loss of Output Power

Pump Laser Diode Bias Current

Pump LD Temperature

Case Temperature

Optional Automatic Gain Control or

Constant Output Power Operation

Optional Gain Flatness Specifications

Redundant Power Supplies

Redundant Fans

REV 2014.03

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7100 Series CATV Fiber Amplifier

Erbium Doped Fiber Amplifier (EDFA)

DATASHEET | MARCH 2014

FIBER OPTICS

Electrical Characteristics

Property

Symbol

V_AC

Min

Typ

Max

265

-72

Unit

V_AC

V_DC

AC Power Supply Voltage

DC Power Supply Voltage

Power Consumption ^{Note 1}

V_DC

-36

-48

P_TOT

Note 1: 10 W valid at 0 dBm input and 14 dBm output power within specified operating temperature range.

Optical Characteristics

Property

Symbol

V_AC

Min

1528

-10

Typ

1550

Max

1562

Unit

Wavelength Range

Input Power

dBm

P_IN

Total Ouput Power Options ^{Note 1}

Output Power Delta to Nominal

Output Port Count Options (SC) ^{Notes 1,2}

P_OUT

P_OUTΔ

-0.5

0.5

Note 3

5.0

Noise Figure

Optical Isolation

ISO

LOS

I_MON

O_MON

-12

Input Power Alarm

Input Monitor Loss

Output Monitor Loss

-11

-10

dBm

Note 1: Pre-splitter total output power. Number of Ports vary by model type.

Note 2: Model Types are specified by output power per port. Output power per port is limited to 21 dBm

Note 3: Test condition with input power = 0 dBm (@ 1550 nm)

Note 4: Specifications valid within operating temperature range.

Absolute Maximum Ratings

Property

Operating Temperature Range

Storage temperature Range

Relative Humidity

Symbol

Min

Typ

Max

Unit

^oC

-40

REV 2014.03

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7100 Series CATV Fiber Amplifier

Erbium Doped Fiber Amplifier (EDFA)

DATASHEET | MARCH 2014

FIBER OPTICS

Outline Drawing

REV 2014.03

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7100 CATV Fiber Amplifier

Erbium Doped Fiber Amplifier (EDFA)

DATASHEET | MARCH 2014

FIBER OPTICS

European Union “RoHS Directive” Compliance

Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous

materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium,

hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union

Directive 2002/95/EC (the "RoHS Directive").

Model Number Information

7100-□□-□□□□-□□□□□

Logo &

Customer

Gain

Flattened

Output Power

per Port

Number of

Ports

Optics

Optical

Input

Optical

Output

Optical

Monitor

Power

Supply

Specific

0= EMCORE

Logo

0 = Gain

Flattened

XX = xxdBm/port

(Maximum:

xx=21dBm)

01 = 1 port

1 = SC/APC

1 = Front

1= Front

1= Input

Front, Output

Front

1= AC primary,

no secondary

1=No Logo

1 = Not Gain

Flattened

02 = 2 ports

2 = FC/APC

3 = E2000

2 = Rear

2= Rear

2= Input Rear,

Output Rear

2=DC primary,

no secondary

04 = 4 ports

08 = 8 ports

3 = None

3=AC primary,

AC secondary

4 = SC/APC

4=AC primary,

Angled

DC secondary

5= FC/APC

Angled

5=DC primary,

DC secondary

10 = 10

ports

6= E2000

Angled

Note 1: Not all configurations are available; please contact your EMCORE Sales Representative.

e.g. 7100-1401-11135 (14 dBm per port, 1 port, SC/APC, Front Fiber, Dual DC)

e.g. 7100-1708-11133 (17 dBm per port, 8 ports, SC/APC, Front Fiber, Dual AC)

REV 2014.03

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7100 CATV Fiber Amplifier

Erbium Doped Fiber Amplifier (EDFA)

DATASHEET | MARCH 2014

FIBER OPTICS

Laser Safety Information

Class 1M Laser Products IEC 60825-1:2007 EN 60825-1:2007

Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007

Caution: Use of controls, adjustment and procedures other than those specified herein may result in hazardous laser

radiation exposure.

REV 2014.03

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

相关型号：