7110-11-XX16-21113 [EMCORE]

SNMPv2 Control Interface;


型号：	7110-11-XX16-21113
厂家：	EMCORE CORPORATION
描述：	SNMPv2 Control Interface
文件：	总6页 (文件大小：545K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

The Medallion 7110 series product line is a family of state-of-the-art high

performance CATV Erbium/Ytterbium Doped Fiber Amplifiers (EYDFA). Packaged

in a convenient 1 RU housing, this line of fiber amplifiers has been optimized for

superior output power stability and the exceptionally low noise figures demanded

by CATV applications.

The Medallion 7110 provides very stable optical outputs over a wide operating

temperature range. Internally it is supported with input and output isolators for

enhanced system stability and performance. Optical power is continuously

monitored at the input and output for automatic power control during operation

over a wide operating temperature range.

Applications

CATV Supertrunking

High Power Distribution Networks

Redundant Ring Architectures

FTTx Networks

The Medallion 7110 offers a full range of flexible configurations and a rich set of

features. These include remote management capability through SNMPv2, Telnet

and a resident Web Server. The Medallion 7110 also supports MIBs specified by

SCTE (Society of Cable Television Engineers) for this product class. For local

management, an RS-232 port is standard, along with a convenient front panel

control menu provided on a Vacuum Fluorescent Display (VFD).

Features

High Saturation Output Power up to

31.5 dBm (Pre-Splitter)

Dual Power Supplies, Redundant &

Hot Swappable – AC or DC

High Level Features

Front Panel Optical Input & Output

Monitor Ports

Automatic Power Control and/or Automatic Gain Control Modes

Port Count, Optical Power, and Connector Style Options

Integrated per Channel WDM for FTTx PON Applications

SNMPv2 Control Interface

Web Server

10/100bT

Low Noise Figure for CATV

Wide Input Dynamic Range

Monitors & Alarms

Loss of Input Power

Very Stable Output Power Over a Wide

Operating Temperature Range

Loss of Output Power

Pump Laser Diodes Bias Current

Pump Laser Diodes Temperature

Case Temperature

Redundant Power Supplies

Redundant Fans

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

General and Electrical Characteristics

Property

Requirements

Symbol

Min

Typ

Max

Unit

AC Power Supply

V_AC

265

V_AC

Voltage

DC Power Supply

Voltage

V_DC

-36

-48

-72

V_DC

Power Consumption ^{Note 1}

P_TOT

EN 50083-2-2006

EN 55013

EN 61000-3-2

EN 61000-4-6

EN 61000-4-3

Agency Listing, EMI

EN 61000-4-2

EN 61000-4-4

EN 61000-3-3

FCC Part 15 (Subpart B, Class

A), 107(b), 109(b)

IEC 60950-1/A1:2009

IEC 60825-1:2007

Agency Listing, Safety

Transportation Vibration

GR-63-CORE

Transportation Shock

GR-63-CORE

Note 1: 60 W valid at 0 dBm input power and 31.5 dBm total output power within specified operating temperature range.

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

Optical Characteristics^{Note 4}

Property

Symbol

Min

1545

-10

Typ

1550

Max

1562

Unit

Wavelength Range

Input Power

dBm

λ_OP

P_IN

Total Output Power Options ^{Note 1}

Output Power Delta to Nominal

Output Port Count Options (SC) ^{Notes ,2}

P_OUT

31.5

0.5

-0.5

P_OUT

Note 3

6.0

Noise Figure

Optical Isolation

ISO

Input Power Alarm

Input Monitor Loss

Output Monitor Loss

LOS

-12

-11

23.5

-10

24.5

dBm

Lmon_in

Lmon_out

22.5

Note 1: Pre-splitter total output power. Number of ports varies by model type.

Note 2: Model Types are specified by output power per port. Output power per port is limited to 21 dBm. A maximum of 8

outputs are available with integrated WDMs.

Note 3: Test condition with input power = 0 dBm (@ 1555 nm).

Note 4: Specifications valid within operating temperature range.

Absolute Maximum Ratings

Property

Symbol

Min

Typ

Max

Unit

^oC

Operating Temperature Range

Storage temperature Range

Relative Humidity (non condensing)

-40

^oC

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

Outline Drawing

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

European Union “RoHS Directive” Compliance

Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous

materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium,

hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union

Directive 2011/65/EU (the "RoHS Directive").

Model Number Information

7110-□□-□□□□-□□□□□

Logo &

Customer

Specific

0= EMCORE

Logo

Integrated

WDM

Output Power

per Port

Number of

Ports

Optics

Optical

Input

Optical

Output

Optical

Monitor

Power

Supply

0 = Integrated

WDM

XX = xx dBm/port

(Maximum: xx=21

dBm)

01 = 1 port

1 = SC/APC

1 = Front

1= Front

1= AC primary,

no secondary

02 = 2 ports

04 = 4 ports

08 = 8 ports

16 = 16 ports

1=No Logo

1 = No

2 = FC/APC

2 = Rear

2= Rear

2=DC primary,

Integrated

WDM

no secondary

3 =

3 = None

3=AC primary,

E2000/APC

AC secondary

4=AC primary,

DC secondary

5=DC primary,

DC secondary

Note 1: Not all configurations are available; please contact your EMCORE Sales Representative.

e.g. 7110-01-2108-11135 (EYDFA, EMCORE Logo, 8 Ports, 21 dBm/Port, SC/APC, Front Input/Output, No Optical

Monitors, Dual DC)

e.g. 7110-11-1704-11133 (EYDFA, No EMCORE Logo, w 1310/1490/1550 WDM, 4 Ports, 17 dBm/Port, SC/APC, Front

Input/Output, No Optical Monitors, Dual AC)

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Medallion 7110 Series CATV Fiber Amplifier

Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)

DATASHEET | JANUARY 2016

FIBER OPTICS

Laser Safety Information

Class 1M Laser Products IEC 60825-1:2007 EN 60825-1:2007

Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007

Caution: Use of controls, adjustment and procedures other than those specified herein may result in hazardous laser

radiation exposure.

REV 2016.01

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

相关型号：