755MM-X-D-41-E2 [EMCORE]
Transmitter, E2000/APC Connector, Panel Mount;型号: | 755MM-X-D-41-E2 |
厂家: | EMCORE CORPORATION |
描述: | Transmitter, E2000/APC Connector, Panel Mount PC |
文件: | 总6页 (文件大小:379K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATASHEET| JUNE 17, 2007
Model 755MM-X Optical Transmitter
DWDM, 65 km, Low Distortion
Emcore’s Model 755MM-X is a directly modulated (DM) DWDM optical
transmitter specifically designed for CATV transmission over fiber links
up to 65 km.
The 755MM-X supports full 79-channel NTSC analog signal carriage
with RF bandwidth up to 870 MHz. The 755MM-X supports dual power
supplies as well as the SNMP network interface protocol.
The 755MM family of transmitter products is designed to support various
CATV transmitter applications with a common platform. Integrated within
the transmitter design are Emcore’s low chirp control, noise suppression
circuitry, and patented predistortion technology to provide outstanding
performance with any of Emcore’s wide range of cooled broadband
lasers.
Applications
ꢀVideo signal distribution to
HFC CATV and FTTP nodes
ꢀVideo overlay in passive
optical networks
The 755MM-X incorporates the Hybrid ModulationTM (patent pending)
scheme to enable the performance of externally modulated transmitters
with the ease of tuning directly modulated transmitters.
ꢀReplacement for externally
modulated transmitters
Features
ꢀEnhanced optical spectrum
Performance Highlights
shaping technology
Min
Typ
Max
50
1560
-
Units
°C
ꢀDual redundant power
supplies
Operating Temperature Range
Wavelength (100 GHz ITU Options)
Optical Power
0
25
-
1540
nm
ꢀSNMP network interface
6
47
-
7
-
dBm
MHz
dB
ꢀAvailable on 200 GHz spaced
ITU DWDM C-band channels
Frequency Response
CNR
870
-
ꢀOptimized RF integration of
predistorter, amplifiers, and
laser
52
-
CSO
-
-65
-65
16
-
dBc
dBc
dBm
dB
CTB
-
-
ꢀComplete, efficient laser bias
and TEC control circuitry
SBS Suppression Capability
RF Input Return Loss
-
-
ꢀOEM/ODM opportunities
available through Emcore
16
-
Noise and distortion performance above assumes 79 channel NTSC loading with no QAM, 0 dBm
received optical power, 65 km SMF-28 fiber or equivalent. See following pages for complete
specifications and operating/test conditions.
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
Model 755MM-X Optical Transmitter
Absolute Maximum Ratings
PRELIMINARY DATASHEET| JUNE 17, 2007
Stresses in excess of the absolute maximum ratings can cause permanent damage to the transmitter. These are absolute stress ratings
only. Functional operation of the device is not implied or guaranteed at these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device
reliability.
Parameter
Symbol
Min
-40
-
Max
85
Unit
°C
Storage Temperature (power off)
75Ω RF Input Level
AC Input Range
Tstg
-
+3
dBm
VAC
Hz
VAC
fAC
VDC
P
94
50
36
-
250
60
AC Input Frequency Range
DC Input Range
60
VDC
W
Power Consumption
75
Optical Characteristics
Parameter
Condition
Min
Typ
Max
-
Unit
Optical Output Power
SBS Threshold1
-
6
-
7
-
dBm
dBm
nm
pm
dB
10 km, SMF-28
16
Wavelength
-
See table
Wavelength Stability
Side Mode Suppression Ratio
Optical Isolation
400 GHz spacing
-50
30
30
35
-
-
-
-
+50
-
-
-
-
-
dB
Optical Return Loss2
APC style connector
dB
1. SBS threshold is measured on the basis of noise floor increase of 1 dB versus optical launch power at constant optical receiving power.
2. In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least 55 dB for discrete
reflections and 30 dB for distributed reflections.
ITU Channel Numbering
Channel
Wavelength
(nm)
Channel
Wavelength
(nm)
Channel
Wavelength
(nm)
21
23
25
27
29
1560.61
1558.98
1557.36
1555.75
1554.13
31
33
35
37
1552.52
1550.92
1549.32
1547.72
39
41
43
45
1546.12
1544.53
1542.94
1541.35
2
EMCORE CORPORATION
Model 755MM-X Optical Transmitter
PRELIMINARY DATASHEET| JUNE 17, 2007
RF Characteristics
Parameter
Condition
Min
47
-
Typ
Max
870
1.5
+1
19
-
-651
-651
-
Unit
MHz
dBp-p
dB
Bandwidth
-
-
-
Frequency Response Flatness
Test Port Flatness
RF Input Level
CNR1
CSO1
47 - 870 MHz
-1
16
521
-
-
Relative to 75Ω input
AGC On, 79-channel
25°C, SMF-28 or equivalent
25°C, SMF-28 or equivalent
25°C, SMF-28 or equivalent
47 – 870 MHz
18
-
dBmV/ch
dB
-
dBc
CTB1
-
-
dBc
Input Impedance
75Ω Video Input Return Loss
75Ω Test Port Input Return Loss
-
75
-
Ohms
dB
47 to 870 MHz
16
16
-
47 to 870 MHz
-
-
dB
1. 79 CW NTSC carriers 50 MHz to 550 MHz, no QAM channels, 4 MHz noise bandwidth, 0 dBm received power, 65 km fiber, 6 dB NF EDFA.
Package Characteristics
Parameter
Height
Dimension
1.75 (44), 1RU
Unit
Inch (mm)
Inch (mm)
Inch (mm)
Pounds (kg)
Width
19 (483)
Depth
19.44 (495) with fans
20.0 (8.9)
Weight
3
EMCORE CORPORATION
Model 755MM-X Optical Transmitter
PRELIMINARY DATASHEET| JUNE 17, 2007
Outline Drawing
Dimensions are in inches.
4
EMCORE CORPORATION
Model 755MM-X Optical Transmitter
Laser Safety Information
PRELIMINARY DATASHEET| JUNE 17, 2007
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class IIIb laser product. A supplemental FDA application has been filed and it is anticipated that the accession
number for this product will be 0220309 since this accession number is from a similar product family. Final
determination will be no later than 1/1/05.
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.5 μm.
Maximum power = 30 mW.
Because of size constraints, laser safety labeling (including an FDA class IIIb label) is not affixed to the module,
but attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
5
EMCORE CORPORATION
Model 755MM-X Optical Transmitter
PRELIMINARY DATASHEET| JUNE 17, 2007
Ordering Information – Model Number Options
755MM-X-x-yy-zz
Model Version
755MM-X
Channel Plan
x = A, 79-channel NTSC
x = D, 60-channel PAL
ITU Grid Channel Number
yy = 21, 23, 25, …, 45
Optical Connector
zz = SC, SC/APC
zz = E2, E2000/APC
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
EMCORE CORPORATION
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
755MM-X DS 061707
© Copyright 2007. EMCORE Corporation
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明