755MM-XA6AFC45NA [EMCORE]
Transmitter, 1540nm Min, 1560nm Max, FC/APC, Panel Mount;型号: | 755MM-XA6AFC45NA |
厂家: | EMCORE CORPORATION |
描述: | Transmitter, 1540nm Min, 1560nm Max, FC/APC, Panel Mount PC |
文件: | 总5页 (文件大小:199K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATASHEET |
AUG 2006
Model 755MM-X (3980E) Optical Transmitter
1550 nm, 65 km, Low Distortion
Emcore’s Model 755MM-X is a recently developed 1550 nm transmitter
suitable for link lengths of up to 65 km. The 75Ω RF video input
supports frequencies up to 870 MHz. Also integrated into the RF/Optical
design are Emcore’s low chirp control and noise suppression circuitry.
Integrated within the design is Emcore’s patented pre distortion
technology to provide outstanding performance with any of Emcore’s
wide range of cooled broadband lasers. These modules may be made
available with dual power supply options and SNMP capability.
Applications
ꢀVideo signal distribution to
HFC CATV and FTTP nodes
The 755MM-X adopts the Hybrid Modulation (patent pending) scheme
with superior performance, which is similar to that of External
Modulation and easy tuning which is similar to that of Direct Modulation,
making it ideal for either FTTP or HFC network applications. The
performance specifications indicated below are subject to change.
ꢀVideo overlay in passive
optical networks (PON)
ꢀReplacement for Externally
Modulated Transmitters
Features
Performance Highlights
ꢀEnhanced Optical Spectrum
Reshaping Technology
Parameter
Min
Typ
Max
Unit
ꢀOptimized RF integration of
predistorter, amplifiers and
laser
Operating Temperature Range
0
25
50
°C
Wavelength (Multiple Options)
Optical Power
1540
6
-
-
1560
-
nm
ꢀDual redundant power
supplies
dBm
Frequency Response
47
-
-
52
-
870
-
MHz
dB
ꢀSupports SNMP protocol
CNR
CSO
CTB
-
-65
-65
16
dBc
dBc
ꢀComplete, efficient laser bias
and TEC control circuitry
-
-
SBS Suppression Capability
RF Input Return Loss
-
-
-
dBm
dB
ꢀOEM/ODM opportunities
available through Ortel
-
-
16
40
Optical Return Loss
-
dB
ꢀDigital monitoring and control
ꢀITU Wavelengths
Noise performance above assumes 79 channel NTSC loading with no QAM, 0 dBm received
optical power
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.emcore.com.
755MM-X 1550 nm Transmitter
Absolute Maximum Ratings
PRELIMINARY DATASHEET- AUG, 2006
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameter
Symbol
TOP
Min.
0
Max.
50
Unit
° C
Operating Temperature Range
Storage Case Temperature Range
Tstg
-20
65
° C
RF Characteristics
Parameter
Condition
Min
47
-
Typ
Max
870
1.51
Unit
MHz
dBp-p
Bandwidth
-
-
-
Frequency Response
47-870 MHz
RF Input Level
CNR2
CSO2
-
-
-
-
-13.7
-11.7
-9.7
-
dBm
dB
-
-
-
52
-
-65
-65
dBc
dBc
CTB2
-
Input Impedance
47 – 870 MHz RF Input
47 to 870 MHz
-
75
-
-
-
Ohms
dB
16
75Ω Video Input Return Loss
47 to 870 MHz
16
-
-
dB
75Ω Test Port Input Return Loss
1.Excludes tilt component.
2.CW carriers, 79 channel NTSC channel plan, 4 MHz noise bandwidth, 0 dBm received power, SMF-28 or equivalent.
Optical Characteristics
Parameter
Condition
Min
-
Typ
Max
Unit
dBm
dBm
dB
Optical Output Power
SBS Threshold
-
6
-
16
-
65 km SMF-28
-
-
-
Side Mode Suppression Ratio
Optical Return Loss1
RIN
30
40
-
-
APC style connector
Back to Back
-
dB
-160
dBc/Hz
1. In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least 55 dB for discrete
reflections and 30 dB for distributed reflections
2 of 5
755MM-X 1550 nm Transmitter
Power Requirements
PRELIMINARY DATASHEET- AUG, 2006
Parameter
Min.
Max.
Unit
94
50
245
60
Vac
Hz
AC Input Range
DC Input Range
Power
36
-
60
50
Vdc
W
Package Characteristics
Parameter
Height
Dimension
1.75 (44), 1U
19 (483)
Unit
in. (mm.)
in. (mm.)
in. (mm.)
lbs. (kg.)
Width
Depth
17.77(452) with fans
9.0 (4)
Weight
Part Number / Ordering Information
755MM-X
-
- -
- XX -
Channel Plan
A = NTSC 79-Ch
Output
SBS
Connectors
ITU Wavelengths AC Power Cord
06=06 dBm (Std) A = 16 dBm (Std) SC = SC/APC
FC = FC/APC
ee= 21, 1560.61nm
:
NA = N.AMERICA
ee= 45, 1541.35 nm
EC = E2000/APC
3 of 5
755MM-X 1550 nm Transmitter
PRELIMINARY DATASHEET- AUG, 2006
ITU Wavelength Channel Designations
Channel
Wavelength
(nm)
21
23
25
27
29
31
33
35
37
39
41
43
45
1560.61
1558.98
1557.36
1555.75
1554.13
1552.52
1550.92
1549.32
1547.72
1546.12
1544.53
1542.94
1541.35
4 of 5
755MM-X 1550 nm Transmitter
Laser Safety Information
PRELIMINARY DATASHEET- AUG, 2006
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class IIIb laser product. This device has been classified with the FDA/CDRH under accession number 0220800.
Single-mode bulkhead receptacles with internal SC/APC connectors (standard).
Wavelength = 1.5 μm. Maximum power = 50 mW.
Product is shipped with internal AC/DC and DC/DC power supply converters.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
EMCORE Corporation
2015 W. Chestnut Street
Alhambra, CA 91803-1542
Phone: 626-293-3400
5 of 5
Fax: 626-293-3428
www.emcore.com
© Copyright 2003. EMCORE Corporation
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明