MAFA3030-SC-P-1 [EMCORE]

Erbium Doped Fiber Micro Amplifier; 掺铒光纤放大器微


型号：	MAFA3030-SC-P-1
厂家：	EMCORE CORPORATION
描述：	Erbium Doped Fiber Micro Amplifier 掺铒光纤放大器微光纤光纤放大器
文件：	总4页 (文件大小：328K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MAFA 3000 Series EDFA

DATASHEET | AUGUST 2012

FIBER OPTICS

MAFA 3000 Series Erbium Doped Fiber Micro Amplifier

EMCORE’s MAFA 3000 Series Erbium Doped Fiber Amplifier (EDFA) Gain Block

Module is an ideal building block for OEM system integrators. The family of MAFA

3000 EDFA Gain Blocks is designed to meet the most demanding noise

performance requirements of special and CATV applications, and performs all the

functions required of a high power optical amplifier for system integration.

MAFA 3000 series EDFA Gain Blocks provide optical isolation on the input and

output of the gain block for stable, low noise operation. The input and output

optical signal power levels are detected for monitoring and control. The input

optical signal is amplified with active gain control for a constant output power level

or with active output power control for constant gain mode operation.

Applications

High Performance Supertrunking Links

High Power Distribution Networks

Redundant Ring Architectures

FTTx Networks

The MAFA 3000 series EDFA Gain Blocks also provide monitors and associated

alarms for all vital characteristics. The optical output of the MAFA 3000 series

EDFA Gain Blocks can be split into multiple ports by an optional external splitter.

Small mechanical footprint allows using this unit in very tight space environments.

Fiber Deep Architectures

Features

Full Function Fiber Optic Amplifier

Ready for Integration

Low Noise Figure (Typ < 6.0 dB)

Pin: -10 dBm to +12 dBm

Pout: +27 dBm to +37 dBm

Standard RS-232 Communication

Low Electrical Power Consumption

Input/Output Isolation >40/40 dB

Polarization Dependant Gain (PDG)

< 0.1 dB

Polarization Mode Dispersion (PMD)

< 0.5 ps

Input & Output Return Losses < -40 dB

Wavelength: 1545 nm to 1562 nm

REV 2012.08

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

MAFA 3000 Series EDFA

DATASHEET | AUGUST 2012

FIBER OPTICS

Optical/Electrical Characteristics¹

Models

3033

Property

Unit

Limit

Comments

3037

3030

3032

3035

3037

Operating Input

Power

Operating Input

Power

Pin (dBm)

Max

Min

Typical

(May vary for some models)

-10

Output Power

Po(dBm)

Nominal

27.0

30.0

32.0

35.0

37.0

Note 2

Noise Figure

NF (dB)

Typ/Max

Max

5.5/6.0 5.5/6.0 5.5/6.0

5.5/6.0

+/-2.0

5.5/6.0

+/-2.0

5.5/6.0

+/-2.0

(Notes 3)

(Notes 4)

Static Gain

Flatness

Dynamic Gain

Flatness

Output Power

Stability

ΔGs (dB)

+/-2.0

+/-2.5

+/- 0.2

+/-2.0

+/-2.5

+/- 0.2

+/-2.0

+/-2.5

+/- 0.2

ΔGd (dB)

Max

+/-2.5

+/-3.0

+/-0.2

(Notes 5)

(Note 6)

(dB)

+/- 0.2

Power

70^oC Case (Premium)

55 ^oC (Economy)

Consumption

(Steady state)

Remnant Pump

Power to Output

Psys(W)

Max

Prp(dBm)

Nom

< -30

Notes:

1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges

2. Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB from the actual value.

3. Measured with input optical signal with Pin ≈ 0 dBm and  ≈ 1550 nm @ 25C. May vary for some models.

4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C. May vary for some models.

5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm)

@ 25C

6. Over polarization and specified temperature range.

7. Premium version – MAFA (with cooled pumps).

Economy version – MAFA (with uncooled pumps).

General and Mechanical Specifications

Property

Requirement

Comments

Operating Wavelength

1545 nm ~ 1562 nm

Standard

Premium

Economy

-40C to 75C

-10C to 65C

-40C to 85C

Operating Case Temperature

Storage Temperature

Operating Humidity

20% to 85%

+5.0V +/-5%

Non-condensing

All versions

Voltage Supply Range

All versions

+24V +/-5%

(efficiency: 75% for MAFA 3030; 90% for MAFA 3037)

User Specified (for MAFA 3032, MAFA 3033, MAFA 3035 and

MAFA 3037, if used separately, only special high power

patchcord is absolutely recommended)

Optical Connectors

Dimensions (in)

SC/APC; FC/APC; E2000/APC

9.5”W x 6.7”D x 1.5”H

MAFA 3030 to MAFA 3037

Unit height depends on heatsink used

REV 2012.08

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

MAFA 3000 Series EDFA

DATASHEET | AUGUST 2012

FIBER OPTICS

Outline Drawing

Electrical Connector Pinout

PIN #

Designation

PIN #

Designation

DC Power Input (+5V/+24V)

KEY-SWITCH

Reserved*

GND

RS-232 Tx

Reserved*

Output Optical Power Mute

Amplifier Disable Input

RS-232 Rx

Reserved*

DC Power Input (+5V/+24V)

GND

Reserved*

DC Power Input (+5V/+24V)

GND

REV 2012.08

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

MAFA 3000 Series EDFA

DATASHEET | AUGUST 2012

FIBER OPTICS

Compliance and Reliability Information

EN 55013: Sound and Television Broadcast receivers and associated equipment – Radio disturbance characteristics –

limits and methods of measurements – Electric Field Radiation Emissions (2001)

FCC: Subpart B. Part 15 class “A”: Unintentional Radiators

EN 61000-4-3 Radiated Immunity

EN 55020 Conducted Immunity

EN 61000-3-2 Harmonics

EN 50083-2, 1995 with Amendment 1

Fit Rate: 90% level of confidence <3500 @ 30C

Ordering Information

MAFA30

Power Level

Connector Option

SC - SC/APC

Class

Power Supply

27 - 27 dBm

30 - 30 dBm

32 – 32 dBm

35 – 35 dBm

37 - 37dBm

FC - FC/APC

P – Premium

E - Economy

1 - +5VDC

2 - +24VDC

EC – E2000/APC

ECD – E2000/APC Diamond

Example:

MAFA3032-SC-E-1: 32 dBm EDFA Gain Block with SC/APC connectors, Economy pumps, +5VDC Power Supply

Note:

As shown on the outline drawing above the option with 2 optical output ports is also possible.

REV 2012.08

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

相关型号：