PONA2114-1-AC-FC-02 [EMCORE]
Erbium Doped Fiber Amplifier (EDFA); 掺铒光纤放大器( EDFA )型号: | PONA2114-1-AC-FC-02 |
厂家: | EMCORE CORPORATION |
描述: | Erbium Doped Fiber Amplifier (EDFA) |
文件: | 总4页 (文件大小:481K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
PONA 2100 Series Erbium Doped Fiber Amplifier
The EMCORE PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA) is an
ideal building block for OEM system integrators. The family of PONA 2100 series
EDFA’s is designed to meet the most demanding noise performance requirements
of CATV applications, and performs all the functions required of an optical
amplifier for system integration. PONA 2100 series EDFA’s provide optical
isolation on the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for monitoring and
control. The input optical signal is amplified with active gain control for a constant
output power level, or with active output power control for constant gain mode.
The PONA 2100 series EDFA’s also provide monitors and associated alarms for
all vital characteristics. The optical output of the PONA 2100 series EDFA’s can
be split into multiple ports by an optional external splitter.
Applications
High Performance Supertrunking Links
High Power Distribution Networks
Redundanct Ring Architectures
FTTx Networks.
Features
Full Functionality 1 RU EDFA
Low Noise Figure (Typ < 5.5 dB)
General and Mechanical Specifications
Total Input Power Range: -10 dBm to
+12 dBM
Property
Requirement
Comments
PONA 2114 – PONA2127
1532 ~ 1565 nm
1545 ~ 1565 nm
Operating Wavelength
+14 dBm to +30 dBm Output Power
Optional Internal Optical Power Splitters
Standard RS-232 Communications
PONA 2130
Standard
Operating Case Temperature
Storage Temperature
Operating Humidity
-10C to 55C
-40C to 85C
20% to 85%
Standard
Non-condensing
Standard SNMP Communication
(coming soon)
100 VAC to 240 VAC 50/60 Hz
-36 to –60 V DC
Standard
Optional
Voltage Supply Range
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
Optical Connectors
User Specified
Key Lock Switch
Standard and Optional Gain Flatness
(1530 nm – 1562 nm)
Dimensions in Inches
19.0”W x 14.76”D x 1.72”H
19” Rack Mounted, 1U
VFD Panel Status Indicator
Low Electrical Power Consumption
Input/Output Isolation >40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Optical/Electrical Characteristics1
Symbol
(Units)
Property
Limit
PONA Models
Comments
2114
2117
2120
2122
2124
2127
2130
Operating Input Power
Operating Input Power
Pin (dBm)
Pin (dBm)
Max
Min
+12
+12
+12
+12
+12
+12
+12
Typical
(May vary for
some models)
-10
-10
-10
-10
-10
-10
-10
14.0
17.0
20.0
22.0
24.0
27.0
30.0
Output Power
Noise Figure
Po (dBm)
NF (dB)
(Note 2)
+/-.25
+/- .25
+/- .25
+/- .25
+/- .25
+/- .25
+/- .25
Typ/Ma
x
4.5/5.0
4.5/5.0
4.5/5.0
4.5/5.0
5.0/5.5
5.0/5.5
5.5/6.0
(Notes 3, 8)
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
GF (dB)
(dB)
Max
Max
Max
+/-0.5
+/-1
+/-0.5
+/-1.25
+/- 0.2
+/-0.5
+/-1.5
+/- 0.2
+/-0.5
+/-2.0
+/- 0.2
+/-0.5
+/-2.0
+/- 0.2
+/-0.5
+/-2.0
+/- 0.2
(Note 7)
(Note 7)
+/- 0.2
(Note 4)
(Notes 5, 8)
(Note 6)
(dB)
+/- 0.2
Power Consumption
(steady state regime)
Psys (W)
Max
5
7
9
12
20
35
40
50oC Case
Notes:
1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges
2. Measurement variations
3. Measured with 8 evenly spread input optical signals @ 25°C, Pin ≈ 0 dBm (Measuring with 1 input optical signal with Pin ≈ 0 dBm
and ≈ 1550 nm is also possible. (Low Noise Figure options with NF ≤ 4.0/4.5 dB are available for some models)
4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm) @ 25C;
Gain Flattened Options with ΔG ≤ +/-1.0dB are available (for some models)
6. Over polarization and temperature
7. Static and Dynamic Gain Flatness for PONA 2130 can be defined for 1545 nm ≤ ≤1562 nm and by special request only.
8. Specific NF and ΔG can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0 dBm.
(Please contact your Sales Representative for more information)
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Outline Drawing
AC versions shown below with 8-port option
DC versions shown below with 8-port option
Compliance Information
89/336/EEC
73/23/EEC
EN 50083-2, (2001)
Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
Low Voltage Directive, amended by 93/68/EEC
Cable networks for TV signals, sounds and interactive services, Part 2
Electromagnetic Compatibility for equipment.
Mains Conducted Emissions
EN 55013
EN 61000-3-2
EN 55020
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
EN 60825-1
EN 60825-2
CDRH
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Fit Rate:
90% level of confidence < 1700 @ 30C (PONA 2130)
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Ordering Information
PONA 21
-
-
-
-
*
Optical Output
Power
Output
Ports
Input Voltage
Connector
GFF/ NF Options
14 - 14 dBm
17 - 17 dBm
20 - 20 dBm
1
2
4
AC – 90-260V 50/60 Hz
DC – 48 V
SC – SC/APC (Default Option)
00 - Standard
FC - FC/APC (Default Option)
EC - E2000/APC
01 – Gain Flattened Option
02 - Low NF Option
2DC – Redundant 48 V
TC - SC/UPC
GC - FC/UPC
03 – Gain Flattened AND Low
22 - 22 dBm
8
NF Option
24 - 24 dBm
27 - 27 dBm
30 - 30 dBm
16
Notes:
1. For ordering PONA preamplifiers please contact your Sales Representative
2. Only some models can be order with Gain Flattened and/or Low NF options. (-01, -02, and –03 suffixes). Please contact your
Emcore Sales Representative for details
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based
on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the
fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.
The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1530 ~ 1561 nm (dependant on input source)
Maximum Output Power = 1.0 W (single output, 30 dBm model)
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明